Related
Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!
I find this bluetooth headset which the company said that it can be used to listen music via bluetooth headset. Simple installed a program call MSI BluePlayer for WM 5.0 and pair their headset.
Product : MSI Free Style FS110 (Attached photo)
Web site : (Chinese Only)
http://cweb.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=619&kind=8
Non-official Web site : (English)
http://www.mobilewhack.com/reviews/msi_fs110_and_fs120_bluetooth_headest_music_transmitter.html
I tested my 818pro which cannot work properly. Actually, it can connect my i-tech R35 & 818pro and listen mp3 (stereo sound)....only 30s and said it only support MSI Product. (Attached a screen shot).
I need to buy this product and test whether it work. I will be updated this post.
Easier Fix
Try this program it just keeps your headset connected to your pda so you get streaming audio. good luck
sas90850 said:
I find this bluetooth headset which the company said that it can be used to listen music via bluetooth headset. Simple installed a program call MSI BluePlayer for WM 5.0 and pair their headset.
Where i can get the above software for testing ???
Can u give me link to get it?
Thanks
Click to expand...
Click to collapse
Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...
thulsey said:
Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...
Click to expand...
Click to collapse
how do you do with your headset? I've a sonyE headset but i can do with my prophet.
Asturias said:
thulsey said:
Somehow, my bluetooth headset from Sony Ericsson has always been able to pick up mp3's and system sounds from my Prophet.
Don't know why that is, or if it is supposed to do that...
Click to expand...
Click to collapse
how do you do with your headset? I've a sonyE headset but i can do with my prophet.
Click to expand...
Click to collapse
That's a good question - it used to do it when I didn't WANT it to, and it hasn't in a long while... I would hit play in Windows Media Player and it would pipe through to my bluetooth headset.
I'll look into it - but off the top of my head I am guessing it was because I uninstalled Cyberon Voice Commander and the button map still held...
The sound wasn't all that great, but it functioned...
I'll see if I can reproduce it. I have reinstalled Voice Commander since.
did you mean you uninstall voice commander and system sound transfer to headset. How to uninstall voice commader, remove it from extrom???
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Anyone, please?
I use the iTech S35 and STEREO works like a charm with the Atom. I get stereo mp3 and movies. The handsfree works too although the voice dial doesn't cos the long press to activate the voice dial uses the button to turn the iTech on and off so u will end up turning the iTech off.
not heard of the iTech powBOX so dun know how it compares but I assume it should work too.
i think it used to work in older ROM version... could it be the new ROM?
I use Samsung Bluetooth SBH100 as a stereo headset with Atom (latest ROM) - got no problems. Headset's remote control buttons for audio player works too. Short press of Phone button make a redial. 4 sec press should activate voice dail (on 'supported devices'), but make nothing (common problem).
can the SBH100 play radio?
touraco said:
can the SBH100 play radio?
Click to expand...
Click to collapse
Don't think so as Atom requires the ear piece to be plugin as antenna...
I am using Bluetake Iphono BT stereo headset on Atom. It can listen to the music and act as handsfree for calls seperately but couldn't do both at the same time, the headset will switch off whenever there is incoming call while playing music, i guess there's some problem on switching btw.
Anyone got the same problem??
can't listen to music but can make calls
Hi,
I'm kind of new here, as I just bought a used atom from that e*** auction site. it works great, except i can't get my bluetooth headset to work as a headphone while listening to podcast, mp3's, etc. using my BT headset to make calls works fine. I have both a Jabra BT130 and BT350 and both have this problem. is it the headset? if so, is there a list somewhere that lists what BT headset is compatible? i really need it to work as I cannot stand using wired headsets since by the time i untangle those wires, I'm out of time already...
thanks a lot!
It's the New Rom..(i think)
Knightro said:
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Click to expand...
Click to collapse
the problem comes with the new rom i think.. i had a bluetooth headset that worked perfectly before i uograded to the new Roms released by O2 itself.. i emailed them about the problem but they insist that nothing is wrong with the ROMs they made...
Hi ,
I know many guys are intesting use VC through bluetooth headset. I found that it can be done in HP6315. Original there is only hands-free/Headset profile for bluetoothn in 6315, the Widcomm BT version is 1.0.0build 3701, the all sounds is from phone to BT headset,the VC dial can be down through BT headset. But the MP3 quality is very poor.
I just upgrade the Widcomm driver to 1.6.0.700, there have another "High quality Audio"profile, so you can use stero BT headset to listen MP3. The quality is good. So if we use SE HBH-ds970 BT headst, we can listen good MP3 and also can dial the number through VC use HBH-ds970. It is very convenience to get both function. When you launch VC, the phone will connect BT handset, the sound is transfer to headset, you can say the number or others instruction by BT headset, when you finish it, the connection between 6315 and BT headset will automatic be active. It will not lost the battery of headset.
Here the question is I 'd like do it in 6515 since I need the mini keyboard and GPS function. 6515 already have "High quality Audio" and "Handsfree/Headset" profile, you can listen good quality music and also can call/answer the calling through BT headset. But it can not use VC, the VC sound is always from phone.
I check the Reg file of them, its are almost same. Unfortunately, I do not have knowledge of Reg file and widcomm stack, can some expert can help me on this?
Thanks in advance!
Regards,
lxy
Could someone share the latest BT drivers for 6515e?
Hi,
I wonder if I could find a good voice dialing software for my iPAQ. Could you please help?
Also, does anyone know the latest BT version post the 1.21 rom?
Thanks and kind regards,
Prankey
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.