Related
i was pushing the icons so i could show you the effect as to what happens when i push (was trying to move my fingers around)
anyways here is the vid
http://www.youtube.com/watch?v=nVULONa7QZ8
edit: New Video: http://youtube.com/watch?v=Z9QeS5GF9nQ
Hey that's look pretty nice. Dare I ask .. Lanscape support?
boinger66 said:
i was pushing the icons so i could show you the effect as to what happens when i push (was trying to move my fingers around)
anyways here is the vid
http://www.youtube.com/watch?v=nVULONa7QZ8
Click to expand...
Click to collapse
Aboinger, I am also interested in exploring Ultimate Launcher. Your Athena Ultimate Launcher Interface looks so nice. How did you do that? Can you explain step by step. Cos I also installed Ultimate Launcher, but Ultimate Launcher can only slide from right to left or vice versa, functions like the "easy shortcut". But Ultimate Launcher cannot move up and down.
Landscape is supported and works perfectly fine...
my ultimate launcher is also limited from side to side / fade animations
when you are in the tabs option and hit create new it should give you an option to add in plugins / shortcuts
what exactly did u need help with id be more than happy to help
Where download the ultimate launcher?
its an exe so its in a zip
dont know where the cab for the english version is ...
updated video to include ftouchsl / new UL interface
boinger66 said:
i was pushing the icons so i could show you the effect as to what happens when i push (was trying to move my fingers around)
anyways here is the vid
http://www.youtube.com/watch?v=nVULONa7QZ8
edit: New Video: http://youtube.com/watch?v=Z9QeS5GF9nQ
Click to expand...
Click to collapse
Better!...
I know this is a thread to demo the UL (which I just got put on two days ago....awesome software). But boinger, I notice that you have flames on your S2U2. One: where did you get that animated background for it? Second: your S2U2 looks as if it was designed for VGA....mine looks like a stretched QVGA screen. How can i get mine crisp like yours?
Thanks buddy. Nice layout..
BTW....I'm not sure what the version that was linked earlier in this thread....but I found the english version here!!!
http://forum.xda-developers.com/showthread.php?t=365334&highlight=Ultimate+Launcher&page=2
yes this one is the english version
and about S2U2 i changed the graphics for vga.. you can do that simply by editing the .png's
i just changed the clock files to be honest.
and in real vga mode the slider doesnt work. so i enabled dpad support cause the screen mapping is off.
i can send you the flames gif... i got it off another member and edited it for vga.
You said editing the png's. Does that mean you changed the icons themselves, or you adjusted the values of the png to fit VGA? Just a little confused on that. Or all together, did you edit the pngs in a software such as Adobe Photoshop? If that is the case I might have to ask are you willing to share....thats a little over my head.
Yes Please email me the flame background...[email protected]
I might go back to S2U2 because of this.
Thanks boinger....appreciated buddy!
the blue flames jpg is attached
and i wouldnt mind sending you the vga clock files but that should be in the clock pack already
boinger,
What sort of icon format does ultimatelaunch accept. Is it only ico? What about png format?
only ico
you can use 32bit xp icons though.. so they look just as nice... only dillema is you have to convert most icons from .png
i can upload my ico icon pack for you all if you like ?
how can i use icon(bottom) like you?
i like your style..
looks nice..
i tried but.. i cannot use it.
i do not know how i set the icon.
i like icon linked like iphone..
please, let me know how you set yr advantage.....
That would be awesome if you uploaded some of your icons boinger. I'm also trying to find some to share here as well.
I'm struggling a little with the "not activated" signs in the corner. I have registered this app, and entered the code twice. Soft-reset. After a couple of minutes and some navigation, they reappear.
I searched for some answers, and it seems there isnt a fixed from what I was able to find.
Anybody else having this annoyance!!
Thanks
here ya go
Thanks boinger. These are nice buddy!!!!
I think I have the wrong version of S2U2. I just took the WM5 version that I used for my x51v. I say this because, I cant use gif. as a wallpaper for it. I'm assuming that I might not have the most current version.
Lastly, I have been trying to incorporate your icons, but for some reason UL will not show them when I select them. I can only use the default icons that come with them.
Any ideas!!!
I don't seem to be able to enter text for the application icon, although I can see that the config icon has a description.
What is the trick to enter this text?
I'm also unable to choose tab icon. Does tab icon got to meet certain criteria for them to work?
eaglesteve said:
I don't seem to be able to enter text for the application icon, although I can see that the config icon has a description.
What is the trick to enter this text?
I'm also unable to choose tab icon. Does tab icon got to meet certain criteria for them to work?
Click to expand...
Click to collapse
For this you have to click the with text button (next to the xp32 icon)
Kenjari said:
Thanks boinger. These are nice buddy!!!!
I think I have the wrong version of S2U2. I just took the WM5 version that I used for my x51v. I say this because, I cant use gif. as a wallpaper for it. I'm assuming that I might not have the most current version.
Lastly, I have been trying to incorporate your icons, but for some reason UL will not show them when I select them. I can only use the default icons that come with them.
Any ideas!!!
Click to expand...
Click to collapse
set the icon size to 72 x 72 that should work..
UL wont show icons unless they are the proper size...
and im running s2u2 .99c
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
??????
Great Idea. I like claunch because of its small siZe, but I don't use it because of the small Icons. Tried the prog and it doesn't work. Icons remain at 32 even after I resized them. I can tell they are larger because it only shows a portion of it. Is there a setting somewhere that I'm missing?
Got IT
OOPs figured it out. Works Great. Thanks
_craig said:
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
Click to expand...
Click to collapse
Hi craig,
good job. Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
cheers
kuifje
kuifje_xda-developers said:
Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
Click to expand...
Click to collapse
Don't know much about 12.03 and what changed with 12.04. However, with 12.04, from what I could tell by the code: it's best to use 16 and/or 32 px icons/bitmaps (or 48 if you're running cLaunch_48px) and show them at their native size. Otherwise, scaling/cropping will occur.
craig,
I am only using this for shortcuts to regular apps with their own built-in icons. I suppose they are 32*32.
When I set the icon size to 16*16, i see the icon in normal resolution but only the upper left quarter of it.
When I set the icon size to 32*32 I still see only a quarter, but now with pixel doubling, instead of the whole icon in normal resolution. When I set the icon size to 64*64 I see the entire icon, with pixel doubling, but distorted at the bottom.
Also, the upper left corner of the icons is shown in the setup screen, and of the settings and options dialog (and ONLY those), only the upper left corner is shown (this makes it impossible to configure the settings, but I can still do that through claunch 1203 which I have installed also.
can you see anything VGA-related in the code?
Kuifje
I have installed the CAB file but when I go to change the icon size to 48, the icons appears tiled on my today screen. The icons are 32*32 and tiled in the allowed 48 icon size. Do I need to make changes to additional settings??
Hi,
I have a freshly purchased Ipaq 214, and i use to use Claunch on my Asus620.
the Ipaq is VGA, and i have same behaviour you mention, ie can only see quater of the configuration menu... which does not really allow to tweak the interface, and finally makes it unusable!
not to be too particular, but 48 point is too large. can you hackup another version that accept 36-40 pixel? thank you so much if you could.
cLaunch Settings
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
vincej said:
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones...
Click to expand...
Click to collapse
I'm having the same problem and I'm pretty sure that it's the touch pro has the TFT 480 x 640 px and the Mogul was 240 x 320 px (Half) I don't know much but I'm sure thats the problem. I'm having this same issue with a few of my old apps (Skyfire, Music ID, Claunch) I'm bummed Can anyone offer a tweak or solution?
bump please make a vga version
Pls a VGA Version.
It don´t runs in my new HTC TOUCH HD
Many thanks,
Omnia qvga it does not work
It looks nice, but when I set the setting for icons to 48 icons are tiled. It does not show the full 48x48 icon when set to smaller size. I have not the tools to do it myself. Thanks for any help.
vincej said:
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
Click to expand...
Click to collapse
Hello
I'm new on this forum and would like to confirm exactly the same problems on my HTC Touch HD.
I've been using this software for years on my old MIO, but I must now move to another soft for my HTC.
Like other people in this thread, I really would like to come back to Claunch.
Any chance to get it upgraded ?
Many thanks for that wonderfull software.
I would like to have Claunch size 64
Hi,
I am very happy with Claunch size 48, but it would be better en size 64 : the friend of my mother had an AVC and he can't speak.
I put pics and shortcut to .mp3 : when he clic on one pic, the pocket PC read a little sentence.
He can use it in size 48, but it would be easier in size 64.
Many thanks for that wonderfull software.
Excuse my bad english, I am french....
Chantal
vga screen
it doesn't work with vga screen .. ie v900
it would be kind if it was possible to make it working for vga screen
many thanks
plus 1 on this if anyone can make a higher res icon version for wvga
would like to try this on the HD2 but icons are only a quater size with this version.
Can you get exe instead of today's plug in?
What i mean can we also jave claunch.exe which can be excuted from PPC as stand alon application instaed of today's plugin
I'm looking for some good HTC Touch themes that dont require the user of WAD WA3 UL ect.. Is this possible? If not, The program needs to be very light on the battery. Any ideas?
start here
Okay, I was able to get what i want by using HHC Today Customizer, The only problem im having is on the today screen theres a thin grey line splitting up icons like on the main screen.. The email, sms, and missed call icons are devided by a thin grey line. this same grey line devides up icons in the other sections of my today screen as well. How do i get rid of it?
Also does anyone know how to change the buttons on the bottem, I think their called softkeys. Theirs two of them, Mine say calendar and contacts.
once again a search would suffice ur needs...to my knowledge...theres no way of getting rid of those separator lines...theres things u can do to change the colour of it to best match your walpaper...and please search...on how to change your softkeys...a search for advancedconfig will solve your problem
The touch flow 3d programs tab uses the default crappy icons for the programs shortcuts, does any one know whether we can use our own slightly larger icons for these shortcuts?
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
Many thanks.... Just downloaded.
All I now need is the phone which should arrive tomorrow.
Beards
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
how does that make the tabs look? do you have a screenshot or just give us a description, thanx
Here's a screenie.
thanx mate
i still hope some one has an idea as to how we can use our own icons for the programs tab, not the tab itself but the actual icons for the programs
AFW said:
Try TFL3DTABICONSV3.cab - I've installed them on the Touch HD and they work fine. Colour icons. Wish I knew who did them so I could attribute properly.
Edit: Oops. Too much haste reading your post. The above icons replace the TF3D tab icons, not those in the Programs tab.
Click to expand...
Click to collapse
This looks to be from the Diamond forum, does it include an icon for the Stocks tab??
It doesn't include a colour icon for the Stocks tab, so it still uses the original b/w one.
Overall, a very neat little upgrade!!
nikki-m said:
It doesn't include a colour icon for the Stocks tab, so it still uses the original b/w one.
Overall, a very neat little upgrade!!
Click to expand...
Click to collapse
Yes, it works well sans the stock icon. I use this along with the NoTopCurtain and SemiTransparent_bottom_Bar and Pamas Transparent Slider. Provides a nicer look. Cheers.
Thanks AFW, have installed it and it looks much better than the original black.
regarding the topic of the thread, im not sure if its been discovered before but iv found a way to add your own icons in the programs.
Using resci registry editor or similur go to
HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher
You will notice that theres 23 folders in there
Now lets say you have atleast 1 program activated, the program details for that should be in folder "0", you will see in that folder that the path for the application is stated, you also notice that there is a string called "IconPath", put the path of the icon you want into that string and then save.
Move to a different tab (any other then programs) and then come back to the programs tab and you'l notice the icon has changed to your preference.
One slight issue is that the icons become really small, im looking into how that can be changed. Im asuming theres one of two solutions, either
1. Change the resolution of the icons
2. or set the size some how in the registry
(Im looking into it, and please post any findings you have in this thread)
Another discovery I made is that by copying one of the folders in HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher and then pasting it back into HKEY_LOCAL_MACHINE\Software\HTC\Manila\ProgramLauncher with the next number 24 (there are only 23 folders, represeting 23 possible program links in the programs tab) and saving it, gives you another possible application link in the programs tab.
The only problem with that is when you select it and add an application it remains blank.
Hi..
I'm having some difficulties downloading this file. Is there an alternative download site or can someone kindly email it to me? Much appreciated.
http://rs553.rapidshare.com/files/150866782/TFL3DTABICONSV3.cab
Hi,
So I was just having a play around and tried installing cLaunch that I used to use on my old p3600
The only problem is that it only supports 16 x 16 icons, so on the HD2 these look so blocky the icon is barely recognisable.
I see that someone has altered an old version of cLaunch to support 48 x48 icons which look great on the HD2 but with one small problem, the version someone altered was for an old cLaunch that only supported QVGA so on the HD2 only a quater of the icon shows (That quater is high quality though, not blocky).
Link to this version:
http://forum.xda-developers.com/showthread.php?t=377490
So I'm wondering of someone knows of a version of this hacked cLaunch that is available for WVGA?
I'm after disabling scence for a bit and just using quicklaunch icons on the today screen like cLaunch can do (Kinda like sence has, but with cLaunch you can just have all the icons without all the other sence stuff and you can have many pages of icons not just 3 pages of 25 icons).
Here is a working with WVGA version, it just doesn't support larger icons like the hacked one above:
http://sourceforge.net/projects/claunch/files/cLaunch v12.03/Source Code/
Any help is greatly appreciated.
******bump******