Plz Help WIFI Activation via Command Line - MDA III, XDA III, PDA2k, 9090 ROM Development

After a failed upgrade with the ROM from I-MATE, it has rendered my BA with no touch. I have since loaded the HEMI image with 6.1, but are not able to activate the WIFI due to no touch on screen.
Does anyone know if I can use a command via a term console to activate ?.
Or can I simply edit a file somewhere to set it active ?.
I have tried several ROMS non get me the touch screen back, if I roll back to WM5 it possible to select it using tab and arrow keys. But WM6 has different screen with only a touch selection .
Any words of advise would be fantastic.

Problem has resolved itself, not sure why but it just started working almost a week later.

Related

Wifi to GPRS/3G

I have searched this and other forums and have not seen either this problem or an answer to it. Per AT&T's suggestion, I just upgraded to the new AT&T rom version that adds PTT and seems to have big problems. My current issue is that when I first boot up and connect via GPRS/3G all works well. When I get to a wifi area and switch to wifi, again all works well. However when I leave the wifi area (or just turn off wifi) I can't get any data via GPRS/3G. The balloon comes up saying it is connecting. The little "G" and bidirectional arrows in the top left indicate it is connected. However in the browser, it just continues to grind away with "Locating" in the bottom right corner until it finally times out and puts up a screen that says that the "page cannot be displayed because the connection was lost". I open the connection manager and press and hold the "Data Connection" icon until that goes off and try again, same problem. The only way I can get GPRS/3G data connection to actually work again is to reboot. Any ideas what is going on or how this can be fixed? Forgot to add that this is an HTC 8525. Thanks.
From your description I wasn't able determine whether AT&T's suggestion was aimed at remedying the issue, or if it's something that came about with the update.
Assuming the latter, you may want to try a hard reset first and run it for a bit before loading any other apps. Failing that, reflash the ROM. I had a lot of trouble with my radio when my 8525 was new, but it mysteriously cleared up after a few radio flashes.
Thanks but still a problem
Thanks for your thoughts here. I hard reset and reflashed.
Yes the firmware is the latest one that AT&T has suggested that everyone who had the older Cingular phones upgrade to. It provides the AT&T logo, the "push to talk" feature, and some other junk. I have contacted AT&T about this and their response was to send me a new phone that they claimed had the old firmware, since they have been getting a lot of complaints about the new firmware. It didn't have the old firmware and also it's SIM card reader appears to be broken. I called HTC and they said that they too have had lots of complaints about the new firmware quirks but had nothing to offer to solve them. Anyway, the old firmware had no problem switching between wifi and CGRS so I don't think it is in the hardware. On the other hand I'm surprised that nobody else is encountering the problem from the upgrade.
I'm having the same prob. Purchase three of these phones and the other users have little technical expertise. First I set up a sync with my office PC. Then loaded the ROM update. I run MAC's @ home had difficulty connecting to my home wifi. Finally determined that the 8525 would not accept the 13 key ASCII wep password. Needed to use the HEX. So I connected. Went to work and had problems syncing with my PC. Active sync had to rediscover the device. Now I'm back home and can't connect again. My Device ID changed names upon "resyncing" and I updated the Airport Base Station with my new name. I've spent a lot of time on this issue.. Maybe I need to send em back for an iPhone!
Well I found a solution to it
This is a great forum - though somewhat hard to search through thoroughly. Anyway the solution for me was to go back to ROM 1.34. Found how to do that through flashing from the micro card at http://forum.xda-developers.com/showthread.php?t=311704&highlight=cingular+8525+rom+version and getting the production ROM version at http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades. Back to normal - everything works fine. Just for a trial, I also downloaded ROM V2.1.1 and it works find also - but sure seems a bit large - ends up with 42.9M of storage free vs V1.34 that has 50.25. Think I'll try the the memory expansion process at http://forum.xda-developers.com/showthread.php?t=298327&highlight=want+more+storage. That seems to at least provide a more than 9 megabyte smaller MBH file but I don't know what that translates to in memory usage yet.
Suspect there is a way to fix this problem but I haven't seen anything in the forums on it.

O2 Xda Stealth, Wifi card not detected.

Hi guys,
Inherited a Stealth few weeks back but i realised that the Wireless option (to turn it on and off) doesnt work, nothing happens when i try to turn on my wifi, so i did a hard reset, but after the hard reset, it doesnt even detect or show up my wireless options. Any ideas guys?
What ROM are you using ??? I had a similar problem with my stealth for over 6 months after upgrading ROM....I tried every thing including careful changes in registry ....the problem was only solved after downgrading to the original ROM more than once ....I still get minor problems when WIFI wouldnot load but works after repeated soft reset ....I suggest you try to soft reset few times an see if this solves the problem....best of lucks....
hi man,
Thanks for replying.
I am using WWE_RM061208. Everytime i restart the phone it says, "Unrecognized card in slot" i am assuming this is the wifi card? any ideas? which version rom should i be using? It asks me to enter the device driver/name or something. thanks.
The unknown card is the wifi card....I used to get this notification daily for over 6 months when the wifi was not working .....Try soft-reset few times and if the notification disappears then wifi should work.....Is your ROM Original or cooked???? have you upgraded the ROM at all??
HI man,
Yes i have upgraded the ROM from www.mwg.com but it doesnt really do much, some of the settings still are around. Any suggestion which ROM should i use? What ROM are u using man? I tried soft reseting a few times but it doesnt work, it still comes up.
The ROM from mwg is original and I used it for downgrade from wm6 (YUC)..... is the wifi working when you hard reset the device ????....I used yuc wm6 but because of wifi problem there, I downgraded from mwg and then upgraded again to yuc wm6 from here
http://forum.xda-developers.com/showthread.php?t=352468
Hello All,
Since a fortnight, am observing strange problems within Network (clogs) and Virus Attacks on my Internet Cable based connection. This is a 256 Kbps line.
Problem I can see is:
a) A script or attacked is launched from a remote server/machine. It's domain address is 222360.com. Attacks happened from union.222360.com, s.222360.com and now with v.222360.com.
b) Once the scripts is launched (.js script), it gets hooked within my browser (Firefox 2.0.0.11).
c) Then, my internet activity will be disrupted severely for some time!! (can't open any page). I am using "Adblock Plus" within Firebox to block this script off.
d) Is there is no script, an attacked is launched on the open HTTP ports or on Yahoo Messenger.
e) Ultimately, an attack is made in form or Trojan or Exploit to gain access or to steal information from my system.
I can see the following logs from the NAV 2007 firewall.
I have similar problems with my stealth..
But worse...
My wireless manager only shows Bluetooth and Phone..
No more Wi-Fi thing..
It happen when i downgrade it to WM5,i got it from mwg..
When i'm using Yuc's WM6 sometimes the wifi works,sometimes it doesn't..
So i decided to downgrade it..
But now i can't use my wifi anymore..
I've been Downgrade and re-upgrade it like 4 times and that long processes did nothing for me..
Anyone have similar problems?
Syubidubidam said:
I have similar problems with my stealth..
But worse...
My wireless manager only shows Bluetooth and Phone..
No more Wi-Fi thing..
It happen when i downgrade it to WM5,i got it from mwg..
When i'm using Yuc's WM6 sometimes the wifi works,sometimes it doesn't..
So i decided to downgrade it..
But now i can't use my wifi anymore..
I've been Downgrade and re-upgrade it like 4 times and that long processes did nothing for me..
Anyone have similar problems?
Click to expand...
Click to collapse
I had a similar problem with wifi for over one year . I had to down and upgrade my stealth 3 or 4 times and finally worked alone after repeat soft reset ...another problem is that you may see wifi icon but doesnot work on pressing it...try removing the battery for 6 to 12 hours and restart again...now at this time I did soft reset for my stealth and the wifi didnot load but iam sure it will work after few hours or tomorrow
First of all thank God,because sending this guy(Yuc) to us..you gave a new life for our O2Xda Stealth,like a candle shining in the dark..Trilions thanks to you.
Actually i would like to ask somebody's help about ZiIME.CAB.. i deleted phoneime.dll but still can't delete zisip_Opt.dll.. it said "Cannot delete file ZiSip_Opt:the file may be in read-only memory,on a write-protected disk,or currently in use by another applications"
is there another way to delete this file?
Secondly how to kill "cprog.exe" in Task Manager?
Another silly question is can somebody upgrade O2XdaStealth GPRS Cellular Data Link to 3G or 3.5G..or is there any Booster for Internet connection?
the 02 xda stealth camera. it was its quality built-in GPS receiver, CK3300 adds navigation functions to the benefits of the CK3100 kit. It enables the driver to access wirelessely NMEA-0183 standard GPS data via Bluetooth . Those Data can be used with all Smartphones or PDAs. The GPS output may also be utilised with the Route 66 navigation software for Symbian mobile phones, allowing not just house-number precision navigation but also up-to-date traffic information.
After almost 9 years from this post, my stealth is still alive

Phone Not connecting to Network

Not sure if any of you guys here have faced this issue. But quiet often when I reboot my phone it starts up to the home screen and then doesn't connect to the wireless network, so basically i see the home screen and none of the buttons work, I remove the battery several times and suddenly it connects to the network.
Is this a known issue and is there a workaround?
I use the official windows mobile 6.1 rom released by HTC for the Sprint Mogul
I'm hearing two problems here:
1 - Your phone doesn't connect to the network. Have you tried to do a hard reset? That sounds like a software issue. Make sure you back up all of your cab files and contacts/mail/texts that you want to keep.
2 - Your buttons don't work. That sounds like a hardware issue and not necessarily related to the network issue. Have you brought it in to a Sprint store to see if they can repair or replace your phone?
i am also facing same problem, my mogul shows wifi on status but does not detects the wireless network, and after several on/off (through wifi on off hardware slider) it sometimes gets connected.
Please help
Its neither 1 or 2.
usually when you switch a sprint phone on you get a pop up saying "connecting to the sprint network dialing # 777" and after sometime, once the network connects then the phone is fully functional.
sometimes for my phone on rebooting it doesnt connect to the sprint network and as a result my phone remains unusable, in the sense the touch screen/buttons dont work. after several soft resets/battery removal it finally connects. I live in an area where there is good network connectivity!
rohan076 said:
Its neither 1 or 2.
usually when you switch a sprint phone on you get a pop up saying "connecting to the sprint network dialing # 777" and after sometime, once the network connects then the phone is fully functional.
sometimes for my phone on rebooting it doesnt connect to the sprint network and as a result my phone remains unusable, in the sense the touch screen/buttons dont work. after several soft resets/battery removal it finally connects. I live in an area where there is good network connectivity!
Click to expand...
Click to collapse
OK, thanks. That gives me a much clearer picture. I don't think this is a network problem. You most likely have something on your phone that causes it to freeze during start-up. Did you install something new or make a registry change just prior to this starting? Also, would you be willing to either reflash or hard reset your phone? A new flash with a re-cooked or different ROM will most likely help you out.
which recooked rom would you suggest. I use the default windows 6.1 rom released by sprint. and btw I removed phone alarm from my phone and it starts up fine now.
There are a few great options, and it's personal preference.
Ryan has made some very good ROMs available here on the upgrade forum.
DCD's last public version are still widely popular.
TPLane37 has made some neat WM 6.5 ROMs available
There's also some good stuff going on over at ppcgeeks.com using the most recent build of WM 6.5
You can also try cooking your own ROM using the tools at ppckitchen.org
Make sure you read up on how to flash before you try it. The process involves a number of steps that must be completed in the proper order.

HP 6915 rom help me plsssss

Hi,
I my problem to my HP 6915 device at about the rom after experiencing the difficulties.
phone features like voice echoed my device to be made to a malfunction. My bluetooth headset and sound in no way inserted into the headset did not reach.
I decided that the source of the problem is. Despite hard reset at the new ROM correct find and install from the Internet I
To solve the problem was no sound echo device is working fine.
wi-fi feature, but when I try to search for wireless networks I noticed
and re-installed rom said.
error during installation,
restart in the first screen when the device began to get labeled NO GSM there.
device's screen when the phone tries to open windows when I was not given any response.
In spite of these problems on the internet for days to investigate, although other people have lived in did not find a solution.
I was advised RADIOOS files, the installation when I try to get all the error messages.
2nd of this device I have one healthy running, it's the rom I want to get into the device problematic.
from the device as a solid backup bin extension, but I can transfer it to other machines did not succeed.
I am waiting for your help on this issue.
Thank you and good work ...

Dead WiFi on my Touch HD. Possible reason: corrupted WiFi EEPROM.

MY problem is. The wifi won’t turn on, and when u go to wifi icon in the connection the turn on wifi won’t be ticked. I have tried a lot off rom and even back to the original Orange rom and spl, all the same didn’t change anything.
I’ve been advised that my WiFi EEPROM has been corrupted or blanked somehow, that's the usual cause.
I need to get hold of an EEPROM from another device and write it onto mine.
This problem has already been known and solution has been found for Hermes model (below is the link to that thread) :
http://forum.xda-developers.com/showthread.php?t=322225
Can anybody help me in my problem? I need tools (something similar used for Hermes model) and working Touch HD.
P.S. As I can see, by reading this forum, this is not only my problem.
I got the same problem as u, The wifi wont on and ticked.
But some times it will. I also doubt this is an hardware problem.
Because some time it will turn on and some times it wont.
any help here?
Now, I found My problem.
When ever I instaled any program. the wifi will stoped working.
is that software issue?
or hard ware issue?
But when I didnt instal any third application the wifi work perfectly, I have changed to several rom including 6.5 coocked.
i'm sorry to tell u this guys, because i used to have the same problem and even worse the camera used to show only blank screen and i my pc couldn't detect my HD via USB, so i searched for solutions but i couldn't find any. I guess the only solution for this problem is by replacing the main board by HTC so if ur mobile is still under warranty go and replace it as i did. I'm also afraid to face this problem again cuz i found that many people are having this problem. plz let me know if manneged to get it works without replacing the main board.
I am trying to attract our gurus' and moderators’ attention, because I believe that we can solve this problem without replacing mainboard. I also believe that HTC corp is making profit by receiving our some kind of broken mainboards, reflash them with the stock EEPROm and sell it as a new again.
Our gurus are spending their times to create bulk of custom ROMs, where at the same time solving such problem with WiFi, looks more interesting and challenging.
Also I understand that if we had real hardware problem, no Wi-Fi, no Bluetooth, nothing would work. But everything is OK, apart from Wi-Fi.
If we have done this for Hermes model, why not to do something for HD as well.
Intermittent wifi
I now also have this problem, having just received a replacement from Orange for my original HD, which I dropped resulting in a badly cracked screen. This first unit had no problem with wifi, and I used it regularly on my home network. I loaded up the new one with all the same software, and, lo and behold, the wifi has become intermittent. Sometimes it works fine, at others when I attempt to switch it on the wifi symbol appears at the top of the screen momentarily and then disappears again, and there are also periods when it won't switch on at all. I have been trying to detect some pattern to this, or if there is something specific that triggers it, but so far without success. I am close to asking Orange for another replacement, and the comments above re corrupted wifi eeprom reinforce this. I also would be interested to hear from the gurus about this issue.
Loads of people report the problem, here and on other sites, but HTC has never explained what was wrong with the returned units (simply swopping MoBos and sending them back) and neither has anyone shown what combination of things "triggers" it - if indeed there is a trigger. It may just be a QC issue.
There was an anecdotal suggestion that the BT/WiFi antennas are too close to the board, so despite the EM shielding running the two together could cause damage, but nobody's been able to replicate it (and I doubt they ever will, as it requires someone to intentionally fry a working handset - not a cheap way to prove a point!).
I've had this problem now for a while and even sent my phone back to HTC for repair. It came back to me about 3 weeks ago and they said they fixed it. I never tested it when I got it back (stupid, I know!) and recently found it not working again. Today I hard reset the phone and found it worked but then didn't after installing Copilot SatNav. Bugger!
Does anyone have a solution to this that doesn't involve sending the phone back because when HTC reboot the phone they'll find that it works (surprisingly as no software will ghave been loaded!)
Any ideas?
+1 No WIFI + Camera + Strange USB connection (IT IS SOFTWARE)
+1 No Wifi, No Camera and stupid USB
The USB works I can flash from computer so it must work.
The USB dosnt ussually work unless flashing.
The Wifi just wont go/stay on at all
6.5 Roms there is no Camera Icon
6.1 Roms when the Camera Icon is hit, nothing happins
This has to be fixable by software, I know I can get the USB working and it is ONLY software as I can Flash it through USB, and in Bootloader it shows up USB when connected. Note:- Also my battery wont charge from USB, testing to see if its battery problem soon, but semi sure it is Software problem, as it will charge a little bit when left in Bootloader mode all day.
PLEASE PLEASE PLEASE HELP, I brought my phone from China (actually came from Belgium) and I am from Australia, don't wanna send my phone a million miles away to Europe.
Edit: USB seems to be charging under Energy Rom and (I don't know if this helps) 1.17.25.09 Radio.
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
First of all, thanks Noonski to stop by to check out this thread
My rom is the official 1.56.405.1 WWE Wm6.1 ROM
Even wrlsmgr cant switch my wifi on.
My wifi worked initially then started niggling, the whole switch on, switch off thing, and now it doesnt switch on at all...
Oh and my reg key at the location is the same
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511
I have tried quite a few roms now including doing MTTY task 29 to format phone and load new roms from sd card followed by 2 hard resets...
Ai, wouldn't know where to go for MTTY and hardware issues.
I do remember the Dying radio on the original XDA issue, so it's not improbable.
I'll make this temp Sticky to see if it get's some attention by others.
My WIFI is dead also....but thank god I got dataplan....but I still wished someone can solve it.
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Click to expand...
Click to collapse
Just to confirm that Blackstone Wifi has the same GUID as shown here above. My Wifi is still working, official stock ROM 1.56.401 WWE, radio version 1.13, no ROM or radio flashes performed so far (other than official ROM upgrade) ...
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
Thank you for stopping by. Without you guys, we will not be able to attract our gurus attention to this problem. By the way, Blackstone Wifi has the same GUID as shown above. My ROM is one of the EnergyRom 3.0 , radio version 1.14.25.24.
Just let me know what to do and I will start testing. Also I have working Blackstone around from which we can extract working EEPROm. Just give me tools and instructions.
I remember that I issued this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512
tabi13 said:
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
Click to expand...
Click to collapse
I remember issuing this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
I find it very interesting that the Trinity has the EXACT same registry entry. Also, the exact same WLAN Radio. So, is there a different WLAN Radio that is having the same issue (I don't remember the Hermes one), or is it solely the TNETW12511 that has the issue? Would be nice to help narrow it down a bit.
Could it be that by using these dumped ROMs that we are inadvertantly flashing code for a different WLAN Radio that is corrupting our eeproms? Maybe there is a small part of code hidden within the DUMPS that still remains? Just some thoughts... This problem seems to be happening more and more since WM6.5?
But I also realize it may be happening more and more because more people are flashing now than ever!
I have same situation with WiFi on my HD.
I would like to say something, which could be useful for gurus.
Sometimes my phone catching WiFi after a few soft resets. 3-4 times and I could connect to WiFi network.

Categories

Resources