Hi there,
I installed the VoIP hack for WM6.1 to get the VoIP feature, so that worked, can use Voxalot over HSDPA/WiFi etc now. But.... Guess what... GPS is not working anymore.
So I found a few files that should enable GPS and VoIP, but still GPS is not working. TomTom say 'no GPS device found'...
Anyone here got VoIP and GPS working on his/her Xperia? Would you please tell me what files I should use?
Argh, that's happened to mine too. Just when I thought I was done with hard resets!
Yeah... hehe... But still, anyone got a solution for this?
i have the same problem! ARGH! im gonna brake my xperia in half, im tierd of hard reseting all the time. have anyone solved the problem yet?
This seems worthy of a *bump* since it's an X1 only problem that doesn't seem to have gotten any attention anywhere at all yet; and also VOIP would be cool.
In addition to the bump, I've followed the instructions from this topic and I got VoIP to work WITH GPS. Howeverrrrr.. As I've posted overthere, unlike the 'normal' suggested cabs, the sound now comes from the external speaker, which of course sucks. I want it to come from the internal speaker.
When you use a Bluetooth headset there is no problem at all, but who wants to walk around with one of those all day long? Was wondering if anyone had a fix for that...!
Related
Dear all,
I have an Orange SPV M700, (standard rom).
I REALLY need to route my satnav directions over my bluetooth handsfree (parrot jobbie) as I cannot hear it otherwise with the radio on (lots of road noise in my car).
Does anyone know anythign that will do this?
Thanks
W
warnysouth said:
Dear all,
I have an Orange SPV M700, (standard rom).
I REALLY need to route my satnav directions over my bluetooth handsfree (parrot jobbie) as I cannot hear it otherwise with the radio on (lots of road noise in my car).
Does anyone know anythign that will do this?
Thanks
W
Click to expand...
Click to collapse
Now THAT would be useful! (really useful reply)
This was always possible with HTC devices, I used to do it on my old Wizard. Hermes and Trinity (don't know about others) can't due to the implementation of Microsoft's bluetooth Stack on the newer devices. From what I read HTC's implementation is not completely to Microsoft Specifications.
Haven't tried any of the new roms yet since I don't have time to reinstall all my apps and haven't seen if anyone confirmed if any of the new rooms fix the issue since everyone is too busy playing with the GPS but it would be nice if someone could confirm.
The easiest way is to install Microsoft Voice Command 1.6 and see if it routes audio through the BT audiogateway. Another way is to use BTToggle/On/Off utility to see if it works with the new roms.
Anyone found it?
If anyone has the solution, I would like to know!
John
Dear all interested in this topic
I've tried BTAudio with no luck (i hear a hiss over the handsfree for about 2 seconds then it stops). There is some useful info in these two links but I really dont have time to investigate further atm. So if anyone else fancies having a look, do let us know if you get anywhere,
http://66.102.9.104/search?q=cache:...+btaudio+doesnt+work&hl=en&ct=clnk&cd=3&gl=uk
http://forum.xda-developers.com/showthread.php?t=281977
Cheers
W
sorry know I shouldnt do this but BUMP!
I don't know what happens with TomTom but I use Wayfinder as navigation software and if my bluetooth stereo headset is on then the Wayfinder voice plays through the headset.
warnysouth said:
Dear all interested in this topic
I've tried BTAudio with no luck (i hear a hiss over the handsfree for about 2 seconds then it stops). There is some useful info in these two links but I really dont have time to investigate further atm. So if anyone else fancies having a look, do let us know if you get anywhere,
http://66.102.9.104/search?q=cache:...+btaudio+doesnt+work&hl=en&ct=clnk&cd=3&gl=uk
http://forum.xda-developers.com/showthread.php?t=281977
Cheers
W
Click to expand...
Click to collapse
I had this happen once or twice with my old prophet (but simple on/off fixed any problems). Most of the time everything worked OK (and I used it loads). Have you tried it lots of times - are you certain that it will not work?
I'll answer my own question. I've just tried mine (latest dopod rom, tomtom, HS850 headset) just get a light hiss but no sound - verytime). Sorry!
Surely someone know a solution!
Another forum was suggesting that "You will need to install Windows .net compact framework v2.0 from Microsoft first though"
Also someone else suggested:
http://www.teksoftco.com/index.php?section=bluemusic
I am using Dopod D810 with the HTC GPS ROM and I am able to listen to music, calls and all audio via my GG Telecom Bluetooth using BTAudio and instruction as per this thread.
http://forum.xda-developers.com/showthread.php?t=289720
Hope this helps.
emjay
I followed the registry hack in this thread.
http://forum.xda-developers.com/showthread.php?t=300838
Finally, it works on my Trinity. No need to install any third party programs.
I am very sorry in advance if this issue has been raised elsewhere on the site, but after spending quite some time searching for an answer by both the forum search and google search, I am going round in circles and haven't found a solution.
I have a UK Tmobile Vario 2 (Hermes) running its original Rom (I have been too scared to flash it in case I break the phone as I don't really know what I am doing) and I have a Motorola S705 A2DP headset. I love the feature on VC 1.6 which reads out new text messages in full but can't find any way of routing the audio for this feature through my bt headset. The incoming call notification works through the headset but every time an SMS comes through it pauses A2DP, reads it via the phones loudspeaker, then diverts sound back to the headset again?!?
I went on the WIKI and found the Voice Command section. I tried installing the patch/program it suggests and did the tweaks it said to the registry , but it didn't make any difference on this problem.
I just wondered if this is an unfixable problem, or if there is anything I can do to get it working because this feature would be incredibly useful to me (I ride a motorbike and to get texts read through my headset when riding would be excellent).
Thanks in advance for any help guys. Sorry again if I am raising a known issue, if I am, if you could point me in the right direction it would be much appreciated.
have you tried this? i know this .cab file worked on my jawbone but i dont/have not used VC 1.6.
bapski said:
have you tried this? i know this .cab file worked on my jawbone but i dont/have not used VC 1.6.
Click to expand...
Click to collapse
Thanks Bapski, I have just installed it but unfortunately it hasn't helped thank you anyway though, it was definitely worth a try
Well, I have had a good read through the threads on Voice Command and all the fixes for the headset button but it seems nothing yet solves the problem of routing the SMS notification through the headset which is a shame, it would have been so useful.
Well, hopefully, when I get my nice new Kaiser upgrade (whenever that may be ) .. I will have more luck with the bluetooth audio
Don't buy a phone with a MS BT stack because they will never fix the problem..MS has known about this for so long its just sad..The next phone I get will have a widcomm bt stack.
Yeh, got to say that the bluetooth hasn't been particularly great ... especially when trying to get it working on A2DP.
If only I hadn't stumbled across VC 1.6 I would be none the wiser and wouldn't even know it is possible to have SMS messages read out oh well
it doesnt work dont even bother, I loved it on my wizard, but there is a hardware problem with the heremes or whatever the problem is the last revision of the BT stack doesnt fix it and its never worked. all the patches and fixes only work for awhile then just stop and rquire a cryptic series of hacks to make them half work again. your better off buying a thai slave to read your messages to you.
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though
I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.
Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship
BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse
Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.
hi,
i have just got this phone X1 and i can not seem to get the bluetooth to work.
the phone can see other phones and i paired it to a few but when i tryed to
send something all i get is 'cannot connect'...
the phone is straight out of the box i have not done anything to it.
am i missing something...
can someone help me please...
thanks...
anybody...
please...
Might not be of any help but ... I had a similar problem but I found it was caused by an application called phonealarm ... if your using this you need to activate irda (even though theres no irda on the phone - sounds a bit odd but it worked after!)
... if not then I'm not sure.
ok then how do i do that then.
i have only had the phone a few days and am still figuring things out.
thanks...
Sorry this is probably a bit late but this is a forum post on the PocketMax (Phonealarm) website that discusses the same issue ... Bluetooth not receiving files
The setting your looking for is activate ir and its located within the profiles menus
I have 2 TP2 both with Vodafone UK WM6.5 stock ROMs.
Have just tried to send pictures between them but get the message "Device does not support a suitable service to perform this operation"
I can send to an old sony but when i paired the TP2s it didnt give me the option to transfer filec for some reason?
Any one know if there is a solution or if this is something i will not be able to get round?
I'm also having all sorts of crap with bluetooth from connecting and not connecting to having to disable and enable all the time to get it to work again.
Havnt got it to work at all, never had a problem with WM6.5. strange they see each other but wont send and recieve
I have a bluetooth function in my Volvo. Worked as a charm with the O2 Live of my wife and my HTC TP.
Since I have the TP2, I can't get it to work. Tried to pair them from both sides and everything seems to work, until I want to call or get a call...
On dashboard screen I can scroll my contacts, but when it comes to call, I see the calling and connecting, but NO sound!!!
Quite frustrating, as I drive alot around.
Had this with the WM6.1 and hoped this would be resolved with the 6.5 (changing back to the original MS BT stack), but no...
Anybody fresh ideas or work-arounds?
Just spoke to HTC, they are unaware of any problems but he is going to get a couple of phones to try them out then get back to me so hopfully there will be a solution soon?
I am having a similar problem with the ATT Tilt2 version and my 2005 TL. Everything connects just fine, but if I try to make a call it just disconnects. If I delete and re-pair the phone it will work until I leave the car. Sometimes rebooting the phone also makes it work. I seem to remember an issue with my Kaiser early on and HTC put our a BT update. I have also reported this to HTC via the web form but haven't heard back yet.
Same here, was able to receive files from an i900 Omnia but wasn't able to send files to this i900 Omnia! Really strange!
Havnt heard back yet but have also just noticed other devices can not find TP2 even though i can find them.
Have made sure my device is visible and all bluetooth is on, trouble is i dont know anyone else with this phone to compare but as i have 2 bought months apart and they act the same im asuming its a fault with software and hoping theres a fix?
My problem is a little different, if I try to use activesync through bluetooth, my headset disconnects, which is pretty stupid.
I really wonder why the hell did they change the bluetooth stack from microsoft, giving us a fancy bluetooth manager interface but crappy performance / less features.
Any ideas or fixes? Cant seem to find any
I found the issue with mine... for whatever reason the BT while showing connected will not place a call while the phone is locked. I always lock my phone so I don't make calls and create bogus contacts in my pockets. I had Wn6.5 on my 2 yr old Tilt (TyTn II) and this wasn't an issue, nor was it with 6.0 and 6.1...
Anyone experienced this or know how to disable?
igo keyboard and mouse
tilt 2 bluetooth conectivity would allow igo keyboard and mouse connect to it software, cant get them to work.
any sugestions
It's not a good sign that Jet Blue doesn't work with the TP2 bluetooth stack.
any one off u have have tomtom installed if u do that can be the prob i have a tilt2 and with tomtom installed i coulnt use bluetooth take a look at a fix i made just incase that is ur problem
http://forum.xda-developers.com/showpost.php?p=4822359&postcount=44