flash light switches on unwanted - 8125, K-JAM, P4300, MDA Vario General

I have a weird bug on my wizard. like the title says, the flash light just switches on randomly. luckily only at a very low level, but still, its an unwanted powerdrain. I can switch it off again by starting the camera and switching the flash on and then off again. I had this using NBD 8.1, also after reflashing it with that, and also with the latest TNT ROM. Is this a known problem? I have never managed to find any information on it.
another problem is that i was missing calls, which could be solved now by using the TNT rom. but the problem was that my phone would seem to work just fine, i could make outgoing calls, but i was missing incoming calls. the phone wouldn't ring, it wouldn't show any missed calls and the other party wouldn't notice anything wrong either, it would just give the normal tones when you ring people. Is this a radio ROM problem? It seems to have started when i moved to the netherlands, i think it was never a problem when i lived in germany.

Related

BUG:NO RINGTONE COMING,HELP PLEASE...

There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...

Sounds stop working after a while

I recently put Black Majick on to my Hermes. From then it started exhibiting a strange problem.
Bascially no sounds are played. For example, there is no sound played on incoming calls, new sms or email messages, when dialing a number etc. I can use the phone as such (the speaker works during a call).
A Soft reset will get the sounds working again but after a while they stop. This is within a couple of hours. I'm yet to work out what is causing it.
I've tried rolling back to older versions of Black, including 3.01 which used to work just fine, but the problem persists.
I've hard reset and then not installed anything else. The only changes are to setup push email. But it still stuffs up after a while.
It's obviously not a hardware fault. If it is software I am at a loss as to what though as different firmware + hardresets should eliminate that. I've tried removing the SD card in case that was some how playing a role. The only thing I can think of is that there is something in EXTROM causing the issue? Doesn't make sense to me though.
Searching around the place has revealed that some people have similar issues but there doesn't seem to be a fix. I've started this new thread in the hope that someone that knows the answer will see it and assist.
Loud sounds have dropped away
Mine sounds like it might be hardware, as the phone only occasionally rings (when I test (ringer ) it just vibrates), I can hear phone calls. I'd like to know where to check software in case there's some switch that I've accidentally tweaked. I have dropped the phone once or twice but not clearly lost sounds immediately after.
It still plays A2DP Bluetooth stereo no problem (that's why I upgraded away from Orange's WM5)
=====================
SPV M3100
Schap's 4.31
Radio 1.38.00.01

JASJAR Crashes on some incoming calls

I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
I also have this once in a while. Mostly, when I didn't reboot my Qtek for several days. The device freezes displaying the Incoming call bubble and it keeps vibrating until I reset it. I guess the caller gets the busy signal or gets re-routed to voicemail.
Cheers,
-mARKUS
the same here...sometimes freezes and show "incoming call" if i dont reset for few days.. i got used to that
same here. any idea for a solution?
poedgirl said:
I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
Click to expand...
Click to collapse
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
orb3000 said:
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
Click to expand...
Click to collapse
yea ur rite had this issue in tomals v7.6 also but when i uninstalled htc home it was ok after that.

Buggy Outgoing Calls?

Hi everybody, I seem to be having a major problem when making outgoing calls, (ie. to Voicemail and other contacts).
Sometimes, whenever I try to call my voicemail or other people, I don't hear any ringing, and when the person picks up.. I hear no sound. This is usually fixed by clicking speakerphone then unclicking it, and I can hear people fine.
But sometimes my sound works perfectly fine... but lately it's been on and off.
I've tried a soft reset, and even went to T-Mobile to get a SIM card replacement, but it still happens on & off? For example, one hour I may make a phone call and I can hear the ringing as well as the other person on the line. The next hour, I may not hear any of the ringing or the person's voice... UNTIL I press speakerphone and unclick it.
I even re-flashed my G1 back to the official Android 1.5 update, it was never rooted in the first place.
I hear incoming calls perfectly fine, and receive text messages perfectly fine as well.
Do you guys think this could be a software or 3rd party issue?
Is your fone rooted?
If it is, then try reflashing your current ROM (or another build maybe)
What ROM are u running?
Have u tried flashing the radio with a newer version?
Be careful if you are running the newest SPL because downgrading the radio will brick your fone.
It sounds like a software issue because you say turning on speakerphone and then turning it off seems to make it work IMO. This would reset the software's interface with the hardware.
No, my phone has never been rooted.
I only flashed my G1 to the official UK cupcake update, then flashed it back to the official US cupcake update when it came out. I re-flashed the U.S update, and I'm STILL having this problem on and off.

Incoming call delayed connection?

I didn't see any reports of this here or elsewhere but I'm having some mixed problems with connecting to incoming phone calls. Sometimes there's a ~5 sec delay before I can hear the other party or they can hear me. Just total silence.
This happens whether the phone is locked (stock slider) or unlocked. I don't see anything odd running and the delay seems independent of applications such as waze or whatever running in the background. Maybe it's a CDMA thing but I had a similar problem with my old vogue a while back with a rom I had flashed and I seem to recall it was a "known" issue and subsequently was fixed soon after.
Any suggestions? I'd really rather not have to re-build the phone today...
Thanks!
Bill
I've noticed the same thing, as well as sometimes I am unable to answer the call at all. For me, it seems more prevelant when the stock slider tries to answer. Hopefully someone knows the solution because I've Googled this and haven't seen anything yet.
Doug
Me too! When I installed PointUI (android theme), It's run very good and smooth. But I don't like it. I uninstalled PointUI then I can hear the sound when have an incoming call.
I don't know how to fix this. I installed shipped Rom and now ok

Categories

Resources