Here is what I've done so far. Anyone with experience or anyone who has successfully gotten their setup to work, please chime in !
1. Install the JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe rom. Test. Works fine when connected by USB, syncs to any Exchange server with no problem.
However, When I try to sync to any Exchange Server or a different Exchange server through the GPRS connection, it sits on "Synchronizing folders", then "Looking for Changes" and finally after a few minutes of doing nothing, it just gives up and goes back to "Waiting for network".
2. As a test, I've tried to install a different ROM. This time ME_DT_WWE_1182553_106_10303_Ship.exe. Now when I try to connect to the GPRS connection, it retries the dial twice, then it "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason. Check your connection settings, etc.". This is after installing the SoftBank extended ROM and doing a hard reset, which worked fine for the previous i-mate ROM.
Anyone have any suggestions or ideas?
logimob
Wireless OK
After doing some more testing, and changing back to the original i-mate ROM, it seems to sync to Exchange just fine using a Wireless connection.
However going back to GPRS, and it's back to doing exactly the same "synchronising folders"/"looking for changes".
To this date, I have never had a successful GPRS sync - has anyone else?
Japan users?
There are no Japan users with SoftBank GPRS ActiveSync working....?
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Fantastic, I'll try to install the rom at www.dopodasia.com/download/HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
and see how I go. Thanks very much for your help and ideas.
Sorry to hear about your sick HTC Hermes!
logimob
Daimaou said:
Hi there, Andrew (you sent him an email) point me to this thread, and will try to reply here. Actually I didn't flash my X01HT yet, but I use Exchange daily on my HTC Mteor and HTC Universal with open.softbank.ne.jp, it works flawlessly. I am waiting for HTC Taiwan to send me back my HTC Hermes (Dopod) back from reparation to try.
But ! Even with my X01HT in Japanese I have sometimes difficulties to connect to the internet and I also have the same error as yours. So this is not really only a ROM issue here.
Now I hard reseted my X01HT and soft reset it before installing the Extended ROM, so there, I do not have any Softbank crap installed my my device and once the open.soft... stuff set I have no problem neither.
Finally I know that some ROM are not Japanese network friendly, for example on my HTC Universal, with an iMATE ROM, I cannot place any Video call, nor access to my voice mailbox correctly, I can dial 1416, but when I want to access to my voice mail... it doesn't work.
Now on ALL my device here in Japan I only install a Dopod ROM, they are, as far as I am concerned the best ROM ever made and with them EVERYTHING WORKS, and I will strongly advise you to try to install a Dopod Rom on your Hermes. If you do not have it on the FTP, I have one on my desktop at the office that HTC Taiwan sent me (HER_DopodAsia_1237074_1060010_WWE_SHIP)
Click to expand...
Click to collapse
After flashing the Hermes with the new Dopod image, it keeps giving me a
Network Wizard error.
I tried adding the open.softbank.ne.jp settings, but it didn't work.
Then I replaced the Extended ROM with the Softbank Extended ROM. Then the settings for SoftBank were automatically configured - but don't work. It says "the current connection cannot be used for your request". Also, the network wizard comes up every soft reset and says "Your current operator (44020) is not supported. You should obtain an update from your device vendor".
This is kind of confusing - do you have any advice? Did you use the Extended ROM as it was?
Thanks very much for your help
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Hi there,
Thanks for your reply. I've been messing around on this all night/all day again, and I've made some slow painful progress!
Firstly, I'm glad you had the same problem. Now I'm reassured that the problems are not related.
Next up, I've been trying to get the internet working. I managed to get it to connect before, but whenever I tried to access any site through IE, I got the error "エラーが発生しました。リクエストが不正です。 wj46000e".
I have since done a few hard-resets, and now it doesn't connect, despite me putting in the connection details 10's of times. I now get the error "Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Did you ever have these kinds of problems?
What kind of extended rom are you using? I just copied and pasted the whole Softbank Extended ROM, which worked perfectly on the JASJAM ROM.
If you have any ideas, I'd be really grateful.
Thanks very much
Daimaou said:
"Your current operator (44020) is not supported. You should obtain an update from your device vendor".
Do not worry for that I have the same problem.
Now you are telling me that you cannot login at all, cannot surf at least the internet?
Just a quick thought... my SBS do not have a real SSL, this is a SBS SSL, so when I quote the box SSL connection in my Mteor or Hermes... it won7t work... try to unquote this box...
Click to expand...
Click to collapse
Ok so this stuff
エラーが発生しました。リクエストが不正です。 wj46000e
I also get this error while ago... actually the first time I had my X01HT and with the Japanese ROM.
I really do not know what is going on with your device, I just hardreset my HTC Universal and put ALL the setting by hands, NO cab from crap Softbank, and it WORKS !
We should maybe meet one day, and try to let me see your device...
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
logimob said:
Fantastic - you're really giving me hope that one day soon I'll have a fully functioning device!!
I'll try restoring the original Extended ROM and inputting all the settings manually again. Hopefully it'll work this time.
I'd love to meet up for a chat and a show and tell session! I'd like to see your fully functioning device. Send me a private msg and I'll reply with my Skype/Email address.
Click to expand...
Click to collapse
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Daimaou said:
Ok Will PM U, but just for reference I flash back my Universal to its orginal ROM and not the 1.90 that we can found here, and straight after the flashing, I put manually the Softbank setting and... WORKS ! I am sure you made a mistake somewhere this is not possible otherwise
Click to expand...
Click to collapse
I just tried installing the other Dopod ROM - with exactly the same results. "cannot connect for an unknown reason". This same stuff worked perfectly on the JASJAM ROM, so I am starting to think these problems are somehow ROM related.
Where did you get your ROM from again?
logimob said:
Ah ok I see... so you installed your original ROM. Is that available for download anywhere? I'd like to replicate your setup as closely as possible.
Click to expand...
Click to collapse
This is a Rom for my universal, not my Hermes, My Hermes with a Dopod rom will be sent back to me today. And since my wife want to use the Japanese X01HT I didn't flash it to US... anyway let's meet and check this out.
Guys, are you using the standard Softbank PC Site Direct connection?
If so, you'll never get Exchange Activesync working unless you uncheck the box for "This server requires SSL" AND the Exchange administrator has configured the system to allow non-SSL connections.
Softbank's "open.softbank.ne.jp" connection is anything BUT open. They are doing port blocking and currently appear to only allow port 80, 25, 110 unless you use Pocket IE. This means that ActiveSync and most IM applications fail.
Softbank is reported to say that they plan to begin supporting Exchange ActiveSync "sometime in December" - until then, the port is closed and there is nothing you can do to make it work.
The workaround is to use [email protected] (but this can get very expensive). [email protected] does not have any port blocking.
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
I will die and rot away before these bastards open up SSL...
hguabmur said:
Anybody heard any updates as to when Softbank will stop blocking the ssl port for Exchange ActiveSync? Still scheduled for sometime in December? This is killing me . . . so stupid that they would do something like this but so typical.
Click to expand...
Click to collapse
I have been looking through the Japanese sites as well but haven't seen anything. I just keep testing every day. Frigging bastards... I told my Exchange and networking team in the US about it and they had never heard of a Windows Mobile device that was blocked from syncing with Exchange SSL over the wireless.
I have a friend in Korea though with a Samsung WM5 device - his works with Exchange but other ports are blocked so he can't use IM apps. So Japan mobile providers are even more backwards than in Korea.
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
hiroshiy said:
Hi, hope this issue has been solved already but just in case:
Softbank open APN open.softbank.ne.jp *did not* allow SSL port to go through, so you needed to turn off SSL mode of ActiveSync.
It seems, though, since a few days ago, Softbank opend almost all ports for APN open.softbank.ne.jp thus you should be able to use SSL ActiveSync without problems.
Click to expand...
Click to collapse
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
khammo01 said:
It works!!
I tried just like Tuesday and it didn't work.
OK, now this device is finally useful!!
Click to expand...
Click to collapse
Glad to hear it worked. Now my interest is how Softbank is going to treat PC users trying to use X01HT as a wireless modem. I personally hope they provide unlimited usage for $80-$90 per month... (after April)
Hi folks,
I have just got myself an HTC TyTN and found this forum. I have been reading it for
a couple of days and managed to update the ROM on my phone to the latest HTC WWE version
on the wiki.
Loving the phone so far but I cannot get BlackBerry Connect to work.
I am running BlackBerry Connect 2.1.2.54 and using my UK O2 3G SIM which was previously
working great for BBConnect on my Nokia E61, so I know I am OK from the network side of things.
BBConnect installs OK, gives me a PIN OK, but when it tries to connect I get:
"Network Available" followed by
"Data Tunnel Available" followed by
"Not Connected"
I should mention that I am only using BlackBerry Internet Service, not the full-blown
BlackBerry Enterprise Service, so I have not installed the desktop part of the software,
only the client for the mobile.
I even tried to downgrade the ROM to the 1.35 version last night but the 1.35 updater
refused to let me.
Has *anyone* got BBConnect to work on the latest shipping ROM? Anyone have any details
about upcoming new versions of the BBConnect s/w?
Reg hacks?
I would be very grateful for any advice, will post back results.
Thanks,
Charlie.
PS: Is there any way to turn off the green flashing network status LED? It drives me crazy
PPS: If nothing will get BBConnect to work, anyone know of another solution to get my POP3
Yahoo mail pushed to my phone (I am UK based if that matters)?
I would appreciate some help with this same problem, but on Cingular USA.
New 8525, updated AT&T ROM, Cingular's Blackberry Personal data plan.
I was told by RIM they don't support Cingular and 8525, but I see many
users in this forum do have it working.
Have tried various version of BB Connect on my 8525, but they
all point to a blackberry.net IP address that ends in .189.
Some threads say it needs to be .192 for USA - is that my problem?
Thanks for your help !
I had Blackberry working fine on a T-Mobile Vario II, but last month that went back faulty (the dreaded lock-ups) and was replaced with a new unit.
I was unable to connect to Blackberry, getting the same response as Charlie. After much investigation TM were about to exchange the handset again when I received a call from TM saying that there was a known problem with a certain range of IMEI numbers on new handsets that were not able to connect with Blackberry. After checking we found that the IMEI of this new handset fell within the affected range.
I was told that it was a Blackberry problem, and that TM were expecting RIM to issue an update or patch to cure the problem. I decided then to remove the blackberry from my account and use other methods, so haven't pursued it.
So it seems there is a known problem with some HTC handsets, but as usual there's little being done about it!
bbc does not work with the new rom. to roll back, use the sdcard upgrade method in the wiki under rom updating for beginners.
this will take you back to 1.34..... sux.
wes
Can anyone else confirm that Blackberry Connect requires the original ROM?
As the previous poster said, that would sux.
Has anyone else been able to get the following to work?
1. Cingular US
2. Blackberry Connect Client (ver 2.1, not 4.0?) loaded onto 8525, running WM5
3. Get Client to generate a PIM
4. Use "Change Handheld" option on mycingular website to enter the new IMEI and PIN
5. Sucessfully access BIS
Please let me know which version of the 8525 ROM and BB Connect you used.
Thanks for your help!
Here's my setup:
1) Cingular 8525 SIM/CID unlocked (HardSPL 7)
2) Elf's 2.1 Crackberry ROM (WM6) - very nice stable build.
3) BBConnect 4.0.0.67 CAB
4) Cingular Blackberry Tethered Unlimited (both BIS and BES enabled)
Make sure you have a data connection working first.
BBConnect will issue you PIN after you click the Register button - you can see this in the BB Connect utility on your handheld.
You can then use this PIN and your phone IMEI on Cingular's BB site:
http://mycingular.blackberry.com/
Don't forget to download the Service books.
If your company has Outlook Web access for Exchange Server you can avoid BES.
BBConnect only allows 3 email boxes on a non-BB device.
Everything works fine except that the BB Service hogs the wireless connection so that I sometimes have problems with other services require internet connection.
Toss that Cingular ROM (even the latest 2.15 update) - it's worthless and a real headache - very unstable
I'm getting ready to install this, can you explain this comment:
If your company has Outlook Web access for Exchange Server you can avoid BES.
Has anybody gotten blackberry connect to work on a Herald?
I just tried it on mine and ended up hardreseting cause it would never boot completely after it.
Help
Are you saying that you cant get the gprs settings for the black berry plan?
I am running the employee blackberry plan on my wing and it works great.
If you are using the black berry internet plan you need to have your gprs connecting to wap.voicestream.com
where did you get the cab for your wing
Cab
I got the cab here:
http://thinkabdul.com/2007/05/30/do...obile-5060-smartphones-and-pocket-pc-devices/
The issue is I install it and it totally hangs my herald up to the poing that not even a reset works. I guess I'll try and see now with WM6, because I did that before upgrading.
Anybody know why it doesn't work?
Thanks
Is this only working on the factory rom or a cooked rom? Im going to test this tonight anyway but i like my Touch layout but wouldnt mind testing this. According the website it changes out the Windows icons and home page to match the needs of RIM.
I will post once i test.
After many hours of testing it doesnt work on the Herald at this time. The software is only good for the Dash. I have to finish my testing from work because it seems to only accept a BES server. I got the service onto the Dash. I will post later how it works but to be honest this process what not worth the trouble.
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
Hope this info helps.
Hard reset your device, install the blackberry software, but install the software in the phone memory, and then synchronize etc. basicaly u need to have a clean device to have it working, i encountered the same problem i followed this procedure and it works on HTC P4350. a.k.a. Herald.
is it possible to get BlackBerry Messenger on a winmo device? if u have blackberry connect does that mean you also get blackberry messenger? or is blackberry connect only for emailing? (which new winmo devices from carriers seem to do just fine with push email). thx
Blackberry Connect not working on my Wizard
I'm trying to get Blackberry Connect running on my Wizard. I have a couple of issues that I haven't seen addressed anywhere in the forums.
First, my info:
Device = HTC Wizard G4, Cingular 8125.
OS = WM 6.1 TNT.19199 v2.
Carrier = AT&T w/ a PDA Enterprise data plan, which allows BBConnect
My company runs Blackberry Enterprise Server.
I was able to get Blackberry Connect 4.0 from here: http://www.sems.org/entry.asp?ENTRY_ID=225
Does anyone have a more recent version?
Do you know if I still need to use a hex editor to spoof my OS version? I haven't tried that yet.
Does anyone currently have BBConnect running successfully on an AT&T data plan using your 8125's IMEI number?
I installed BBConnect 4, it rebooted, I tried activating the BB, but it just said "Not Connected". Occasionally if I go to Utility and click "Register" the status screen will say "Service: Network Available" then "Data Tunnel Available" then back to "Not Connected".
Can I please hear from anyone running BBConnect on a Wizard? What is your configuration? What is your version of BBConnect? Where did you get it? What am I doing wrong?
Thanks in advance,
Dave
Tmobile Wing-Herald and BBC
This is more toward mrbrady12--
You posted:
Maybe someone can work on a cab file to make this compatable with the Herald. Also Xavier, custs of T-Mobile cant use the BB service with the Wing. Employees are able to use it because you are not truely on the BES on windows you are using webmail to bypass the firewall. This software once it works on all Windows mobile phones will generate a PIN which is required for blackberry users to use its service.
I am having this very issue. I have a new Wing, I am on Tmobile, I have a BES data plan for my sim. Lastly I have the BBC 4.0.0.97...Installed without issue to phone memory. But will never generate a pin. Even speaking to BES server over GPRS or 802.11 etc, it will not activate my corporate account. I took my card to Tmobile and tested on a true bb device.. Worked no issue.
So I would tend to agree with you regarding these folks not truely on BES service over celluar means. You might be catching internally via 802.11 but even that seems odd.
So, please if the "wing'ers" have this working share the info..
thanks all
do you know the muffinman..the muffinman..the poking ms muffin.
Hello everybody,
Today I got my XDA Orbit 2 and tried to get BB Connect to work. It installes correct but after reboot it connects for 3 seconds and then it disconnects again. Also I have no PIN in the Status Bar.
Do somenone know how to bring BB Connect to work on a HTC Polaris?
Any help would be fantastic!
Bye
Giovanni
I would like to know how to do this as well...
Anybody else out there who wants BlackBerry Connect on their device?
I also want to know if Blackberry is going to work if I buy a Polaris.
And what's the difference (if any) between Blackberry Service & Blackberry Connect.
Basically I want to be able to use the Polaris with my corporate BB server.
TIA
p.s. there's also a thread going on here:
http://forum.xda-developers.com/showthread.php?t=360114
have you tried the latest version of BBC v4.0.0.92 ?? you can get it here http://www.sems.org/entry.asp?ENTRY_ID=276
Hello,
My device is on the route to come to my home... I will give you a feedback about soon
We have BB enterprise within our company.
Speek you soon
Roman
banzro said:
My device is on the route to come to my home... I will give you a feedback about soon
We have BB enterprise within our company.
Speek you soon
Roman
Click to expand...
Click to collapse
Hi any news on the bb connect. I just got the device and also receive a pending indication for the PIN for ver .090 , .091
Any news
xphobic said:
Hi any news on the bb connect. I just got the device and also receive a pending indication for the PIN for ver .090 , .091
Any news
Click to expand...
Click to collapse
if you have pending ... it means your Device ID/OS Version or Provider isnt permited to connect! have you a modded/cooked rom on your device or a original? if its a original, possible your provider isnt permited ... it isnt a original rom ... write it back and try again!
This phone looks fantastic.. it nearly has everything i need...
I am moving from a blackberry pearl with push email on a Blackberry internet service.
What do you guys reckon.. Will it have or be possible to use with the blackberry service (connect maybe?)
appreciate your comments
Dean
I believe theres a software of BB for wmo devices, it lets u chat with your bb contacts and stuff...
Hi,
I am wondering if in the meantime anyone did get the Blackberry Connect software successfully run on the HTC Snap?
I bought the Snap in summer, installed several versions of BB connect, but it didn't work...always got the message "PIN pending".
On my HTC Touch HD it works fine...
Has anyone been able to get Blackberry Connect to work?
rsacipher said:
Has anyone been able to get Blackberry Connect to work?
Click to expand...
Click to collapse
I tried before..still not worked..
i tried bb conect for Moto Q..the software can be install..but never got a pin from blackberry apn...the pin always stated as pending.
i tried to change device id via registry..but got same problem..never get a BB pin successfully.
I have worst trouble, trying to use BBC on my Snap (ROM MAPL_3VOLUTION_WM65_3VO.1.60.090209) but after install BBC SW (BBConnect_WM5_Smartphone_BB) and restart device as per request, my Snap gets bricked on the startup (WM6 3evo logo) and only way to recover is reinstall entire mentioned ROM again.
Installed BBC Desktop on my PC, it works but is not able to connect my Snap due to SW not installed on mobile.
Tried to HardSpl original manufacturer ROM (Movistar Spain in my case) also gets bricked, probably due to my previously installed "Dash3G HardSPL1.19 by JockyW" required to flash mentioned ROM MAPL_3VOLUTION_WM65_3VO.1.60.090209.
Each BBC installation test takes me a lot of time to recover system
Any help would really appreciated.
Kind regards.
Found a site with more information, testing but no chance due to I'm not able to find compatible mobile/ROM version:
http://www.sems.org/entry.asp?ENTRY_ID=225
Thanks.