Database Users

Help me I'm stupid! Orbit boot problem after bad flashing

hi I've tested a new powermap.exe dopod rom but after reboot my O2 still freez on boot screen (I can see only O2 boot screen with radio and rom version), so I can't connect my Orbit in windows mode, only in IPL boot (via usb) but I've this error when lounch any rom:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...please anyone konw the solution of my problem or have any original German O2 rom?
help me please!

Hi ...
If you had unlocked your Device with IEMI Check, and everything was fine, and you sure that your device is now CID unlocked, than try T-Mobile original ROM (should help) IF not? So ... Welcome Here
Cheers...

I supposte that the only way is find the original O2 GERMAN rom, anyone have it?
I'm stupid, stupid, stupid!!!!

do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me

thefamous said:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...
Click to expand...
Click to collapse
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.

grun said:
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.
Click to expand...
Click to collapse
I've just sent email to imei support, look:
Hello,
you only can get it back to life with an O2-XDA-German-ROM (which odes not exist right now).
The other option is to send the device to repair (service centre).
The unlocker can NOT work in case your device has a malfunction (it is described in DETAIL that the unlocker requires a working ActiveSync connection on the our web site where you purchase the unlock).
Regards,
IMEI-CHECK Team
----- Original Message -----
>
>Hi, I'm disperate (and stupid man).
>my orbit is stuck on boot screen exactly as manples'. i tried to flash
>pdamobiz custom ROM. i can enter bootloader.
>I've just buy your unlocked service but now I can't install any rom because my
>orbis still on boot O2 screen ()freez).
>So your application strart only in windows and via actyvesync mode, and I've
>no connection in actyvesync mode with my stuck orbit.
>only solution is to found the original rom, do you have the O2 GERMAN rom?
>please help me!!!!
>I've bought the Orbit in germany (O2 operator, and in origin there was a
>GERMAN ROM).
>best regard and excuse me for my bad english.

phsnake said:
do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me
Click to expand...
Click to collapse
do you know where is the TM shipped rom? I have O2 Orbit and originary was GERMAN rom...

someone in this forum posted his own web page, i guess its there.

link: www.our-xda.co.uk

YUPPYYYYYYYYYYYYYYYYYYYYYYYYY My ORBIT O2 was re-born
the solution is in this magic ROM (I've O2 but this is the compatible rom Tmobile, i suppose...)
art_tmouk_11311001_024990_wwe_ship.rar
thanks to all.

I Had The Sam Problem
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????

It is posible only if your Device is CID unlocked ... If not ... only service or imei-check...
Cheers ..

to jokkk3r:exactly, lot of people flash first, then read. ooops I dont have supecid unlocked-whats now, please help im desperate....
& i dont understand why anyone is trying ROM thats well known for flashing probs-pdamobiz- it could be interesting to find out how many of us had troubles after flashing

2 phsnake:Yes, but how many ppl have it installed and workin WELL? Witch ROM you thing is the best for O2 At the moment?

psrejic said:
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????
Click to expand...
Click to collapse
I apologize for you. My orbit was originary German and locked, so I'm unlocked it with imeicheck utility, so I was installed a HTC wwe ship rom. And yesterday I has a problem with powermap rom. Now I've solved with TMobile rom, I don't know if working because my Orbit was CID unlocked (I belive no, because if now i try to install htc wwe ship rom I've wrond ID error message..) Do you have try to install via bootloader mode? enter in bootloader, so double click on tmobile rom.
bye

2 jokkk3r im using dopod shipped, im quite happy. its +-new dev. it'll take some time till here will be some roms or at least tools for cooking them.but most im waiting for is extrom unlocker like is for universal,thar U can use it like a storage

O2 xda Orbit problem

Hi there, I got my O2 xda orbit 2 weeks ago from germany and I decided to change the german rom to an wwe one, but the phone got bricked and stays on the welcome screen
I think I did a CID unlock but I am not sure. I can get to bootloader but I don't know what to do. How can I put a WWE WM6 on my Orbit? and also how can I check if my battery is above 50%?
Thank you

flash device with original O2 ROM.
regards,

Ok, but the only original O2 roms that I found in this forum are WM5, the original WM on my Orbit was WM6

Have you tried using the original O2DE WM5 ROM, although I am fairly sure that O2DE were one of the first to release a WM6 ROM.
EDIT: Yes, here it is: ftp://htc_us:[email protected]_O2_DE_3.4.207.2_4.1.13.41_02.88.90_Ship.exe

So when I flash the original O2 rom, can I upgrade to an english WM6 and how?

Follow the instructions on the UPSL thread to CID unlock your device. NOTE: Best to use an XP computer, Vista will not work right.
Then immediatly flash the ROM of your choice.

I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx

n1k1 said:
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
Click to expand...
Click to collapse
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!

O2 WM6 rom
use the O2 wm6 upgrade nothing wrong with it really go to their site and download . If you have a UK O2 orbit you will not need to CID unlock it will go on with no problem

Shand359 said:
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
Click to expand...
Click to collapse
You don't like it then that is fine, but crap? No. It is wholly stable and works absolutely perfectly.
Shand359 said:
Don't have anything new to add that hasn't been said already.........except that i don't like it. Been using B&B3.7 until last night. O2 WM6 seems like a step backwards from this ROM, not sure why
http://forum.xda-developers.com/showpost.php?p=1410662&postcount=8
Click to expand...
Click to collapse

Yes it is stable, yes it works perfectly.
I still don't like it.
B&B3.7 is very stable. It also works perfectly. plus it also works a damn site faster too.
I am entitled to my own opinion, you are to yours.

n1k1
did you recover device?
you can flash any ROM with USPL installed, read USPL manual.
regards,

Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?

n1k1
1. you need to flash your device with original ROM it was shipped with.
flashing is done from bootloader. activesync will be unavailable, don't bother. just start flasher and follow the wizard.
2. when device is flashed and operational, install uspl.
documentation is supplied with uspl.
3. since then, you can flash any ROM you like.
regards,

n1k1 said:
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
Click to expand...
Click to collapse
Hold TOP LEFT button and press in RESET and get device into bootloader. Can't do anything from welcome screen. Then flash the devices original ROM. After this flash USPL and the B&Bv4 as this is the best available...........as of yet anyway.

Hi
I followed uspl instructions. But after stage 1 (White screen) active sync will not connect. Phone connected to charger, still on White screen.
If advice above about bootloader is correct, could someone re-explain with simple steps.
Thanks colink

Re flashing to original ROM /SPL

Hi everybody, Martin from Argentina here.
I have a Polaris and I had flashed with the oli hard spl and test some roms last months.
The issue is that the wifi turn on doesnt work anymore and may be it due a phone drop-to-floor event...
I think I can ask the seller about the guarantee, but I think I will need to reflash to original SPL and rom. A friend of mine have an original untouched polaris so I think I canget the original spl and rom from there.
The problem is I dint find how to do it. Can you give some advise or link?
Best, Martin

Look here:
http://forum.xda-developers.com/showthread.php?t=381600
and search for:
Flash back to original SPL
Regards

Thanks! I really appreciate your post!
Best Martin
running Polaris 3LIT3 Full rom!

ok for warranty

Hi everybody
i'm a french topaz user
i need to send my phone for warranty replacement to orange france
i was (hard spl 1.33 olinex and latest Original htc rom and custom radio)
i've put the latest orange rom (_HTC Touch Diamond2_RUU_Topaz_Orange_FR-B2B_1.72.73.2_Radio_Sign_Topaz_61.27t.25.23_3.45.25.21_Ship)
then passed hardspl relocker
now at startup, it's written like this :
R 3.45.25.21
G 61.27t2523u
D 1.72.52121
can i say my phone is "as a stock one" ?
i think yes, but i'm not sure
thanks, regards
Cédric

tsetse_fr said:
Hi everybody
i'm a french topaz user
i need to send my phone for warranty replacement to orange france
i was (hard spl 1.33 olinex and latest Original htc rom and custom radio)
i've put the latest orange rom (_HTC Touch Diamond2_RUU_Topaz_Orange_FR-B2B_1.72.73.2_Radio_Sign_Topaz_61.27t.25.23_3.45.25.21_Ship)
then passed hardspl relocker
now at startup, it's written like this :
R 3.45.25.21
G 61.27t2523u
D 1.72.52121
can i say my phone is "as a stock one" ?
i think yes, but i'm not sure
thanks, regards
Cédric
Click to expand...
Click to collapse
Hmm it looks normal to me.

Rom newb questions about SPL / HardSPL for POLA200?

I have a brand new XDA orbit 2, which is offered with a warranty by the supplier.
I put the O2 official WM6.1 upgrade on it (RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe) which flashed fine.
I intend to try one or more of the many great sounding WM 6.5 rom images, however, I have a few questions, mainly related to SPL/HardSPL, which although I have done a bit of searching for, have not found definitive answers for ...
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
Also - anything else I should be thinking about before flashing this device (note I am going deactivate copilot before flashing)?
Apologies if I missed the answers in other posts!
TIA

cix said:
Are there any differences between POLA100 and POLA200 devices (will HardSPL work fine on my XDA Orbit 2 / POLA200).
How can I restore the original SPL on the device?
Can I extract the original SPL from a) the device, b) the ROM image, c) source elsewhere?
With HardSPL installed can I reinstall the official upgrade rom with HardSPL still in place (in case of stability problems, with rom images).
TIA
Click to expand...
Click to collapse
1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
2.yes you can...flash original spl
3. don´t think so
4. now problem...but after you flashed original rom
so try:
look on my rom thread under steps: there is all you need
http://forum.xda-developers.com/showthread.php?t=593750
but all the other rom´s here are also great: eg: pcarvalho´s...kosta´s...salvy.c.83´s and FW-eXXon´s rom´s
big thanks to all of them
edit: i saw this will HardSPL work fine on my XDA Orbit 2 / POLA200).
Are you german or...??? it´s not so important but if you are german look here for a german rom:
http://forum.xda-developers.com/showthread.php?t=605070
Have fun

Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again

cix said:
Thanks for the reply... Sorry to be slow, but...
>1. yes...main difference is touch cruise...polaris 100...o2 oribit 2 polaris 200
Is that significant technically, which is what I did not say very well?
>2.yes you can...flash original spl
>3. don´t think so
How do you flash the original SPL then (I am v. newb!)? I don't have that (other than on the device itself).
>4. now problem...but after you flashed original rom
The original rom has been flashed (over) with the official update, I am not really getting the point here? Do you mean my orignal O2 uk WM 6.0 or the original referenced from your thread (RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship)?
Thanks for the pointer to you rom thread which looks very useful (I am from UK BTW)
Thanks again
Click to expand...
Click to collapse
1.don´t know exactly but this is what the xda wiki says:
Polaris 100 HTC Touch Cruise P3650
Dopod P860
Polaris 200 HTC Touch Find
O2 XDA Orbit 2
link:
http://wiki.xda-developers.com/index.php?pagename=HTC_Polaris
3. after you flashed original rom->here the link of original spl
http://forum.xda-developers.com/showthread.php?t=381600
4. the 6.1 rom read my thread under steps there is also the original rom link
http://forum.xda-developers.com/showthread.php?t=593750

Many thanks for the info / links ...