I just noticed my two LEDs on my phone buttons (the green one for "call" and red for "hang up") aren't lighting up anymore. They were working perfectly, the least I can think of the cause was either c_shekar's ROM that I newly installed, or some other software.
That said, does anyone know of a software that can test LED lights by making them blink or light up?
Thanks.
jo_iii said:
I just noticed my two LEDs on my phone buttons (the green one for "call" and red for "hang up") aren't lighting up anymore. They were working perfectly, the least I can think of the cause was either c_shekar's ROM that I newly installed, or some other software.
That said, does anyone know of a software that can test LED lights by making them blink or light up?
Thanks.
Click to expand...
Click to collapse
After reading your post I noticed that my call and hang up lights are also not working, and this is also after I installed c_shekar's latest WM 6.1 ROM.
I wonder if there is some registry setting to rectify this?
Anyone have any ideas
Check the following, this should help you. I had the same problem as noted above, but one of the great guys on the site came to my aid.
It should b ok, anyways i have attached CamRecSvs for u here from master C_Shekhar!
Enjoy Attached Files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Light threat En-disable.zip (34.8 KB, 1 views)
__________________
Cambodainboy
XDAii=WM6.1
ROM Date 20.2.2008
ROM Version 6.1.1b16CS
Radio Version 1.17
Bootloader 1.06
By C_Shekhar
jo_iii said:
I just noticed my two LEDs on my phone buttons (the green one for "call" and red for "hang up") aren't lighting up anymore. They were working perfectly, the least I can think of the cause was either c_shekar's ROM that I newly installed, or some other software.
That said, does anyone know of a software that can test LED lights by making them blink or light up?
Thanks.
Click to expand...
Click to collapse
Although I have to say I found that (CamRevSbs) shortly after I made this thread, I still owe you thanks. Thanks.
Related
Hi folks!
Has anyone here by chance had an issue with their Hermes Jogwheel? My phone's carefully looked-after and has only ever been dropped twice but for some reason my jogwheel has stopped working.
I tried a hard reset to make sure it wasn't a software thing but no luck with it working again
blackobsidian said:
Hi folks!
Has anyone here by chance had an issue with their Hermes Jogwheel? My phone's carefully looked-after and has only ever been dropped twice but for some reason my jogwheel has stopped working.
I tried a hard reset to make sure it wasn't a software thing but no luck with it working again
Click to expand...
Click to collapse
I have only seen one previous report of a hardware issue with the jog wheel. Not likely a repairable component, but might just need re-seating.
NB also has flashlight on the reverse (does that work??)
51H00350-00M
PCBA-Daughter Board Flash light Module
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mike
Yeah it's strange... The light is fine (tested with the camera flash function)
Just weird that it stopped all of a sudden and can't see as it's a software problem because of the hard reset etc.
I may have a look for a "how to disassemble" guide and see if it's been unseated as you suggested, cheers!
EDIT: For others who may see this and have a similar prob, the guide is here:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardwareOverview
blackobsidian said:
Yeah it's strange... The light is fine (tested with the camera flash function)
Just weird that it stopped all of a sudden and can't see as it's a software problem because of the hard reset etc.
I may have a look for a "how to disassemble" guide and see if it's been unseated as you suggested, cheers!
EDIT: For others who may see this and have a similar prob, the guide is here:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardwareOverview
Click to expand...
Click to collapse
In terms of dismantling guides (in addition to the above) you will also find some links and a chance to download the official service manual here:
http://michael-channon.spaces.live.com/
Mike
Nice, cheers!
hi, i was wondering can anyone help me with my 8525's backlight. i dont know why but my backlight screen is not all i tried backlight setting to the max and nothing happens. i then opened the phone and check the connection and still nothing. its really bugging me right about now. can someone please help me!!
this is how it looks. had to angle it to get a clear picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if im missing any description that is needed to help please let me know. p.s. i recently installed black majik assuming it will fix but backlight but it didnt.... im starting to think its the lcd screen not working correctly
i.b.dat.fo said:
if im missing any description that is needed to help please let me know. p.s. i recently installed black majik assuming it will fix but backlight but it didnt.... im starting to think its the lcd screen not working correctly
Click to expand...
Click to collapse
The ROM change would have reset any software issue and you have checked the connections, so I''m afraid it does sound like a hardware fault. I presume the backlight never comes on and you see ?? nothing on screen?
Perhap there are others who have experienced this?
Mike
yea the backlight never comes on but i dont see my today screen and stuff i can still use it but its preeetty hard using it without the backlight haha. hopefully someone has the same problem and fixed it. i hope its not the hardware.... thanx for the reply thought i was going to be left alone hahah
can anyone help me??? or has a solution to this problem??
i just put in a order for another screen hopefully its the screen that is defective....
The main backlight is generated in a pcb of the Flash unit(camera flash). It´s located inside of the rear case, and have a small screw that the subject one to the internal antenna. This pcb have a connector in the under side. If this connector (or the complete pcb) is disconnected, removed, liquid damage or broken, the main backlight don´t works.
Found a trick to the led notification inside the ROM control area. If you would like to change the color of your LED notification do not use custom colors to the left only use the slider to the right and then set them.
The slider to right is the colorful one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have pretty much tried every single color and it works pretty well some colors more then others.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
What's the difference between Set and !!!? So all you do to change the color of yours is use the slider on the right... do you need to then touch the right-hand color swatch, the Set button or !!! so it takes effect?
JediSooner said:
What's the difference between Set and !!!? So all you do to change the color of yours is use the slider on the right... do you need to then touch the right-hand color swatch, the Set button or !!! so it takes effect?
Click to expand...
Click to collapse
!!!! Is the stock ics blue
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I can't seem to figure out how to get mine to show anything other than a yellowish color. I'm using the slider on the right and hitting set, but to no avail. Just attempting to get back the stock blue, much less abrasive.
EDIT: Unsurprisingly it turns out that I'm just dumb and was overlooking LED settings within other apps...Oops! OP recommendation works just fine. Thanks!
No problem and don't use the !!! Just click the new color and done like I said it's close to the color that you pick but not perfect. Some notifications automatically come out red on their own for example Facebook notifications etc. but system apps seems to be the color that you pick
After installing this on my phone the LED won't do anything when charging, fully charged. Any reason why? I tried light flow but its bugged for the S3 right now.
Ov3rbyte said:
After installing this on my phone the LED won't do anything when charging, fully charged. Any reason why? I tried light flow but its bugged for the S3 right now.
Click to expand...
Click to collapse
because aosp does not offer those options only Samsung software
Anyone else notice the white led that lights up while charging?
I wonder if this could be RGB as well and light up with other colors?
Perhaps someone can bring a tweak or mod that can activate the LED for notification purposes?
Just wanted to get this thread started for anyone also interested in this happening. I hope a Dev can come forth and make it a reality!
This has been mentioned. I am not rooted yet but I wonder if anyone has tried the Light Flow app from the play store to see if it works.
I am rooted, and have tried lightflow. Unfortunately it reports that the LED is white only. :crying:
shimaspa said:
I am rooted, and have tried lightflow. Unfortunately it reports that the LED is white only. :crying:
Click to expand...
Click to collapse
So it doesn't work for notifications at all through the app?
No, I could not get it to have any control over the LED. I tried the legacy version as well, and direct mode and also granting su (all suggestions from the author of the app). Nothing worked.
shimaspa said:
I am rooted, and have tried lightflow. Unfortunately it reports that the LED is white only. :crying:
Click to expand...
Click to collapse
But can it be used for notifications, even if it is just white?
blackra1n said:
But can it be used for notifications, even if it is just white?
Click to expand...
Click to collapse
I don't think so. It's pretty much the same led that was on the 3rd gen Moto and it's not much use for anything actually useful.
Tel864 said:
I don't think so. It's pretty much the same led that was on the 3rd gen Moto and it's not much use for anything actually useful.
Click to expand...
Click to collapse
Bummer I had really hoped to use it as notifications. Even if it just white at least flash when I have one
Can anyone post a pic of that LED? Im not seem it.
Thanks!
luan3232 said:
Can anyone post a pic of that LED? Im not seem it.
Thanks!
Click to expand...
Click to collapse
I googled this image, though on my phone it's to the left of the fingerprint button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good news guys
After I installed elementalx kernel I tried to use again light flow and now it works for notifications
If someone can test just for stay sure that was that and no other thing
So today when I plugged in my phone after it was switched off I saw the white led lit up ,located inside the top ear piece ,left side ,the led also lit up when I started the phone while plugged in
Can someone else confirm the presence of led ..Wish there was a way to enable it !
k4mik4z said:
So today when I plugged in my phone after it was switched off I saw the white led lit up ,located inside the top ear piece ,left side ,the led also lit up when I started the phone while plugged in
Can someone else confirm the presence of led ..Wish there was a way to enable it !
Click to expand...
Click to collapse
Bro first search before posting there is already a thread made on this https://forum.xda-developers.com/g5-plus/how-to/moto-g5-plus-led-light-t3576646
So please close this thread.
I don't know who the mods of the forum is ,can somebody tag em and fuse the threads .., I'm on a very slow net connection , should have looked it up a bit thoroughly
There is A way And I Enabled It
k4mik4z said:
So today when I plugged in my phone after it was switched off I saw the white led lit up ,located inside the top ear piece ,left side ,the led also lit up when I started the phone while plugged in
Can someone else confirm the presence of led ..Wish there was a way to enable it !
Click to expand...
Click to collapse
Yes Bro It Is True u can enable it and use it as normal led it will also lit up when u get nothfication[IMG="Yes It Works"]
https://img2.brain3.photobox.com/25255517d6a5a3c4679cc78e7d19bb5bd5eb3a7e022e4e846ef41473d588e42aef128d83.jpg[/IMG]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shamith08 said:
Yes Bro It Is True u can enable it and use it as normal led it will also lit up when u get nothfication[IMG="Yes It Works"]
https://img2.brain3.photobox.com/25255517d6a5a3c4679cc78e7d19bb5bd5eb3a7e022e4e846ef41473d588e42aef128d83.jpg[/IMG]
Click to expand...
Click to collapse
How'd you do it ?
I watched Video On Youtube
k4mik4z said:
How'd you do it ?
Click to expand...
Click to collapse
Here is the link for channel https://www.youtube.com/channel/UCCK96JYTLZVEsxYXrFPxw4w