Related
Hi there boys and girls ... for those interested ....
QC BQS Ana*lyzer 3.0
What is it ?
-----------
Let's call it the ultimate BQS / QC swiss knife and very special Crypto Tool (RSA Signature Calc can be used for any mobile):
BQS only :
----------
1. Load AMSS to extract files or useful infos
(EF81, E81C, EF91, SXG75, EF82, SF71, SL91, M7 or similiar ones)
Features :
Extract Infos from AMSS : USBID, Product.Nr., SVN, SwBuild, Mobiletype
Extract internal filesystem (mif,bar,sig etc. files)
Extract certificates
Extract all BMPs,GIFs,PNGs, JPGs
Extract AMSS signature bytes (if production key)
Show all file references used by mobile
2. Sim_Secure extraction/decryption (non-public)
3. Master-/Usercode/Unlock extraction and direct unlock (non-public)
All QC :
--------
1. Load Partition File to get overview about NAND/NOR structure
2. Make usage of QCs Diag Interface .... to do nice things
(Useful for any QC mobile in the world)
Standard Features :
-------------------
- Send standard diag commands or any hexadecimal command you want (database included)
- Read out all NVItems (range given)
(all that exist, more than QPST normally extracts)
- Backup and Restore all NVItems
- Read out and Dump Firmware in Memory (IRam)
- Read out complete EFS
- Switch to FTM Mode (or anything else you want)
- Get infos about phone ..... etc ..... a lot more functions
- Generate SimSecure Command to write to SimSecure using given file (may brick your phone when used without knowledge)
Bootloader / DownloadMode Features :
-------------------------------------
- Load any file to mobile at any address and execute (bootloader f.e.)
- Read out complete NAND Memory using bootloader (range given) with included MSM6250/A bootloader or any given bootloader
Usage : Take out battery, put in battery, press ON # to enter emergency mode, Execute Loader
or (with SL91,SF71 f.e.) enable FTM mode, Execute Loader
- Use any Download Mode or Bootloader Command to experiment
- Read application memory of newer Diag Ver 6 in Download Mode
- Show complete infos about used NAND after loading of Bootloader
Flasher Features :
-----------------
Flash any QC mobile (OBL Multiboot) with given bootloader
- Flash PBL (dangerous), QCSBL, QCSBL Header and Config Bits, Partition, OEMSBL, OEMSBL Header, AMSS, AMSS Header and EFS
3. Crypto Function :
-----------------
- Calculate CRC-30, SHA1 and MD4 of any file
- Bruteforce bytes to fit CRC-30 needed when qcsblhd_cfgdata.mbn was edited
- Decrypt any RSA-Message, including ASN-1 / SHA Signatures.
- Check firmware signature given Modulus and Exponent
4. Sim_Secure extraction/decryption (non-public)
5. Full Feature JTAG Interface (non-public)
Although it is still a bit buggy and things have to be speeded up ...
it is the successor of AMSS Analyzer .... but more reliable and even much faster
Planned in future :
-----------------
1. Bugfixes
2. Tooltips showing real addresses in graphical window
3. EFS2 Directory Browsing
4. Elimination of extracted files in amss.mbn for better understanding
5. Simple NVItems Editor
6. Porting NVM hack already working with JTAG to COM/USB
7. AMSS signature hack, Exploit for Signature (this will be a tough task)
8. Read out SMS / Addressbook via Diag Interface
NO UNLOCKING ! PLEASE DO NOT REQUEST. THIS PROJECT IS FOR EDUCATIONAL PURPOSES ONLY, NOT TO HARM COMPANIES FOR THEIR EFFORTS.
What we need :
----------------
- Any contribution to the project is welcome.
- Donations for new hardware and software for further development of this tool.
- We need support in programming and documentation XD
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list
Cya and keep on reversing,
Viper BJK
For full source, see project homepage.
If you think my tool is useful and you would like to donate some money for further development, feel free to do so :
http://viperbjk.beepworld.de/
great stuff, I admire your work, this has been used to partially unbrick a htc titan (work in progress still, as it crashes on some bit of code in init god knows why).
Hi.
New Version supports MSM7200.
Maybe take an look.
Code:
New version 3.42 out
--------------------
What's new ?
-------------
- Find public keys in HTC SPL.nb via Cryptosearch
- Added Public Keys for [B]HTC[/B] Firmware (Diamond, Kaiser, Raphael)
- Exponent bugfixes
- New RSA Decryption interface
Feedback are welcome.
Thanx.
Best Regards
Forbidden
Your client does not have permission to get URL /p/qcbqsanalyzer/downloads/list from this server.
bad link
Link to the project files :
------------------------
Version 3.00 Fruit Assassin (Major Release)
http://code.google.com/p/qcbqsanalyzer/downloads/list
Does this software works on new phones, or is there any similar software?
Hi Guys,
I hope someone can help me, I have a vodafone 845 and want to create a custom rom for it.. i have downloaded the orginal rom from huaweidevices and on ubuntu stript it with the use of a perl script. Then i used unyaffs for windows to unzip te system.img after that i created a new zip with systemdirectory, boot.img and META-INF, then i signed the zip and send it to my sdcard.
I booted into recovery and flasht the zip after 1 or 2 minutes after succesfully format of system he begins to copy and then it gives a error on a bin file and stops..
i have used the following website:
http://forum.xda-developers.com/showthread.php?t=566235
http://blog.coralic.nl/20...our-build-aka-system-img/
Could someone please tell me what i'm doing wrong?
Sorry for my poor english..
nevermind the problem was my update-script..
WI-FI Problem
Hi thought you may be interested in this, I live in South Africa and it seems the original rom has been specifically desighned for our country, seems a few other south african phones are experiencing similar problems
there is a South African rom posted on the huawei web site, resets everything
Tried all the roms so far, your Mr Edition v1.3.2 causes th phone to become unstable, Mr Edition v1.2 works great, but The WI-FI refuses to work
Details
type : WIFI
state : UNKNOWN/IDLE
reason : (UNSPECIFIED)
extra : (NONE)
roaming : (FALSE)
failover : (FALSE)
isAvailable : (FALSE)
Wi-Fi
Unable to start Wi-Fi
power control is half lit asthough it is trying to activate
Please C if you can find a difference in the setting between the rom u used and the ZA rom found on the huawei web site
thank man
keep on the good work
Ok i just found out this other awesome program call ubuntu that you can put on your Hd2. I saw pics and videos of it and it looks like an actual mini computer on the phone. I was WONDERING if anyone knows where i can download it as well as how to put it in the phone. Also if you could please tell me a little bit more about ubuntu and its wicked features.
from the original post on the first page of android development:
http://forum.xda-developers.com/showthread.php?t=719646
Ubuntu
Ubuntu for HD2 v0.2
This second version has many new features like connectivity and is fully functional with the HD2 touchscreen. (No more USB stuff needed!)
release date: July 30, 2010
filename: hd2-ubuntu_0.2.zip
size: 773MB
md5sum: 2d67bbe658cc7a9e8599e8adf7724768
torrent: (use encouraged)
http://linuxtogo.org/~lgorris/hd2/hd2-ubuntu_0.2.zip.torrent
http://oe.netripper.com/files/hd2-ub....2.zip.torrent
direct mirrors:
http://linuxtogo.org/~lgorris/hd2/hd2-ubuntu_0.2.zip
http://oe.netripper.com/files/hd2-ubuntu_0.2.zip
http://htc-linux.org/stuff/leo/hd2-ubuntu_0.2.zip
Quickinstall
It is important to check included readme.txt for safety notes, usage instructions and other confusion!
*1) get storage card with at least 3GB free space
*2) extract archive into root directory of storage card so that ubuntu folder is in \Sotrage Card\ubuntu
*3) runt haret exe
Features and Changelog
Kernel
*Updated Linux kernel based on htc-msm-2.6.32 revision '3af9a39113d40887f42688108ff0dbdeefd8e4cc' (see first post)
*Improved touch screen and keypad driver allow for decent navigation with the bare device
*WiFi driver
*3g driver
*Vibration driver
*Many [[Msm_Usb_Host|USB host]] drivers added (usb mass storage, audio, networking)
*Battery, panel and bluetooth drivers not installed yet due to lack of available source code. (only zImages available)
*Exact kernel source code with patches used included in archive.
Rootfilesystem based on the Karmic Koala from 0.1 release with
*Enlarged rootfilesystem size (2,6GB)
*Many tweaks for touchscreen use: on screen keyboard, enlarged GUI components, ..
*One touch super easy operation of 3G and WiFi connections, screen rotation and other things
*New packages installed, e.g. firefox and fennec browser with kinetic scrolling, pidgin instant messaging, ..
*Easy installation of extra languages etc
*GUI for the media player (gnome-mplayer) to allow basic control of the video playback
Note for testers of the old 0.2-beta release
Thanks a lot for checking the beta and providing feedback! This allowed for fixing the following in final 0.2 release:
*The off-screen content (e.g. wicd passphrase) problem was resolved adding ALT key (Home button on HD2) to drag windows around
*Add gnome-mplayer gui for the accerlated mplayer
*3G DNS hack removed (opendns caused problems accessing many websites)
*Enlarge on screen keyboard
Hi guys, ive just downloaded the ubuntu to try, and upped to MU so if anybody wanted a mirror here you go.
http://www.megaupload.com/?d=B1J3NM4K
TheATHEiST said:
Hi guys, ive just downloaded the ubuntu to try, and upped to MU so if anybody wanted a mirror here you go.
http://www.megaupload.com/?d=B1J3NM4K
Click to expand...
Click to collapse
thank you very much, the other link was giving me a 3 day download time! and i cant use torrents since my isp throttles the speed on them. So again thank you very much
yea thanks, the other links couldnt be found....thanks again
Thankyou
Thanx a million I was searching for this file and finally ..........
Ashrafali
HTC HD2
hi guys, does anyone know what can cause this error:
e2fsck: invalid argument while trying to open /dev/block/loop2
the superbock could not be read or does not describe a correct ext2 filesystem ec........
Resize windows
Is there a way to resize the system windows, or change resolutions?
9v9 said:
Is there a way to resize the system windows, or change resolutions?
Click to expand...
Click to collapse
grab the edge of the windows and drag to the size you want, might need to disable the window being maximized (right click on the windows bar in the top bar, unmaximze)
plopper
I understand how to resize certain windows. What about resolution?
9v9 said:
I understand how to resize certain windows. What about resolution?
Click to expand...
Click to collapse
launcher: settings --> display
gnome menu (enable in the panel)
system --> administration --> display
if both show no alternative's, edit /etx/xorg/xorg.conf.
no idea if there are any other working resolutions.
change fonts and other window features: appearence.
system --> preferences --> appearence (gnome menu).
plopper
I will try that out and let you know my findings, thank you!
Trying to run Ubuntu v0.3 gives me a problem.
I runt the haret file, the "shutting down hardware
Turning off MMU" etc text shows up, but at the point when the ubuntu should be booting, the text (shutting down hardware
Turning off MMU, jumping to kernel...) just fades out, screen goes blank and nothing happens.
I am currently using a 4gig SD card, could this be the problem, do i need more space?
I didnt find any other posts with this problem described so answers are greatly appreciated.
Im running a newly hard-reseted stock winmo 6.5.
ROM: 1.48.409.1 (71294) NOR
Radio: 2.05.51.05_2
Neltari said:
Trying to run Ubuntu v0.3 gives me a problem.
Im running a newly hard-reseted stock winmo 6.5.
ROM: 1.48.409.1 (71294) NOR
Radio: 2.05.51.05_2
Click to expand...
Click to collapse
You have to update the Radio ROM to a newer version. See in Android Section for detailed instruction.
nafets.f said:
You have to update the Radio ROM to a newer version. See in Android Section for detailed instruction.
Click to expand...
Click to collapse
Thank you
Any comprise folder link pls
Here We Go:
After Playing With the Fonts & bla bla bla. on my HD2 MDJ's CyanogenMod7 v2.5 & 2.6, i got my arabic RTL working good and Words are connected in sms, browser, apps, etc..
Download:
RTL PATCH ( attached )
FONTS ( attached )
Arabic Keyboard ( from the market )
Instruction:
1: Extract rtl-auto-patcher-0.0.4.zip
2: open the AndroidRTLPatcher.exe
3: Connect your Android Phone via USB
4: Click on TEST CONNECTION
5: if you using MDJ's CyanogenMod7 tick the same as the picture down:
PIC attached ( RTL Screenshot )
6: Click on Go Go Go !
7: wait until it asks to reboot the phone click yes and you done With RTL Patch.
Fonts:
1: extract the fonts & copy to your Memory Card
2: use ROOT EXPLORER (download from Market )
3: Copy the two fonts into the system/fonts and replace them.
4: download Keyboard of your choice from the market & Restart The phone>
5: you Dont you must have the same font as shown down
Screen shot attached ( arabic on HD2 )
Feel Free to ask..
wail alqasmee
nobody hav tested o tryd it.. cmon guys. i need ur rply if it works
would try it, but google prevents syrians from downloading programs from their site.
and I'm too lazy/wary of using routers and such, plus, using them in the past has put me through some troubles so...
I'll see if there's a workaround or something
Hey i've uploaded THE RTL Patch on Mediafire you can download the attached file to get the link
can we get Hebrew by same way???
i dont know how to.. but if you hebrew font from using PC font rename the font to DroidSansHebrew and replace it and check... if not than try with another font..
Hey Guys Guess WIth the RTL Patch i tested with the same uploaded fonts on
HD2 CoreDroid DHD V1
And arabic is working fine on it. connected letters..
thanks, I tried it but somehow the program doesn't find my phone
do I need the SDK for that or what?
I haven't got it yet because I don't want to go installing pointless programs on my PC. plus I can't download the SDK from Google's because of the block >.>
great work keep it up
this is funny, but when I manually added your font in the fonts library, it solved most of my problems :S
thanks
many many thanks for this
but i have an issue here,
the patch detects the phone & build without the type, i choose NAND as my rom manually, the patch starts to the point that it stops with error, something about it cant replace the files coz they are in use, says to try from recover mode, rebooted and tried from CWM but it also failed to apply the patch.
so i replaced the fonts manually, rebooted, arabic letters is connected with some letters not showing the right way, and of course no RTL
is there a solution ? i could live without RTL, just want all the letters to show the right way
can you check if HTC SYNC is open , otherwise close it and try again , that's work for me
aymen_ben_ammar said:
can you check if HTC SYNC is open , otherwise close it and try again , that's work for me
Click to expand...
Click to collapse
of course HTC Sync is off
everything works fine, to the point of the patcher starts " Patching Device " , it works for a couple of seconds then it fails
it says " File transfer Failed Because The System is in use it is recommended to start your phone in recovery and try again "
i tried patching from clockwork recovery mode with no luck
thanks anyway, i managed to solve it manually on my own
The RTL patcher in this post is really old.
I've since created a newer version with broader compatibility and better device detection: See here.
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
excellent tuto for newbies
Maybe put a reminder about flashing this with 80% or more battery..
Thanx alot! Really helpful. Waiting for tut for ext4 frmat'
Sent from my Galaxy ace using Tapatalk
Can i flash this rom via recovery....i'm a newbie here.. thanks
subaash said:
Can i flash this rom via recovery....i'm a newbie here.. thanks
Click to expand...
Click to collapse
U cant.. At least not yet.. For now just stick with Odin..
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Awesome Rom. Just can't get a2sd swap to work. Everytime i click the enable swap, it says "working" and then goes back to off. Any idea why this occurs?
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
omg awsum newz ......
Sent from my GT-S5830 using XDA App
Hi izzoe,
I added the battery info in the thread. Thanks for reminding me.
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
That's good news.. So many good news (and good ROM) for Ace lately.. We are growing..
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
rajanprash said:
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
Click to expand...
Click to collapse
Never done this either, altough the only time I flashed my Ace it was the 2.3.3 update. I used ODIN and removed SIM and the SD card aswell. But it's not a custom ROM so I don't know if it really counts...
How can i fix gps problem,i cant switch on my gps with this rom.
Diliban said:
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
Click to expand...
Click to collapse
im newbie.. i just want to ask if i need to update my froyo to gb 2.3.4 before doing this tutorial of this custom rom?.. and this custom rom supported tun.ko.. thanks...
how to ..
Hi Diliban,
I'm running 2.3.4 KPH from Samfirmware.
Can you share with me how to create zip to enable "Power menu add on: reboot, recovery, download mode"
Thanks
Is it necessary to format SD card in ext4 before flashing?
a few questions... i'm kinda new on this.
Before flashing any rom, I must do a wipe of everything .. data... etc right?
and... once I flash the rom, I have to root the device again?
thanks. why was the link removed?
unable to download. link not working. please give a mirror
MPAI said:
Is it necessary to format SD card in ext4 before flashing?
Click to expand...
Click to collapse
The answer is YES.
It highlighted in Pre-flashing check list on post #1.