Is it fault of OEM dialer skin? There is ringtone delay in Windows mobile. The phone only starts ringing after some 3 rings hearing from the caller's phone. After having tried restoring to the default Windows dialer skin, this lag can be minimize to just 1st ring from the caller's phone and my Diamond can start ringing.
There are posts stating disable HTC dailer skin will loss control the in-call volumn control. You can refer to the following post the black VGA dialer skin is very good looking and there is a post contains a cab file to disable HTC volumn control and give you back the default Windows volumn control for in-call volumn.
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
You may loss the bluetooth icon in the taskbar when bluetooth is activated without the HTC dialer skin. But this frees some 10mb+ memory and the most important you can hear the ringtone (even in mp3 file) after the 1st ring only. This is what Windows mobile should perform, but OEM just add its "good-looking" dialer skin with hugh skin files in bmp which makes the phone wake up delay.
would be nice if someone could rescript the dialer for better use.. or even better... if htc scripted it GOOD themselves..
work great
it solves accidently anwering or ignoring incomong calls, don't need to use Answerkeys Disabler anymore, just great, even standard volume control makes Diamond quicker. WOW
Related
Hi,
after installing too many apps this evening i found two problems:
- when i receive a new message a very little windows appears on lower left side of the home windows. This new one probably replaces the extended normal one which appears when a new sms arrives.
- when i set the ring off or vibration mode however the diamond ring but at the max volume. It's crazy !!!
These are the last apps I've installed today before find the problems:
- scorpio16v 4icons_in_row
- jizy HTC Action Screen
- Nadavi HTC Diamond - Improved Connection Manager
- ThumbCal 1.1.2
- dark Phone Pad - International
- Dictmgr
I removed all the apps but the problems persist.
What can i do?
Do you need the list of all applications installed of my Diamond?
Thanx
Hi again,
i've done some screenshot of the problem...i hope now someone can help me
As you can see the stupid restricted window with the new message is over any other apps.
Thanx
i haven't installed those apps yet. have they all been done at once? i can test to see if it is linked to one, but may be tied to a combo of them.
th1nm1nt said:
i haven't installed those apps yet. have they all been done at once? i can test to see if it is linked to one, but may be tied to a combo of them.
Click to expand...
Click to collapse
Hi th1nm1nt,
i installed them about at this order:
- Dictmgr (install and removed because i couldn't understand how to use it)
- dark Phone Pad - International (install and removed because unuseful)
- ThumbCal 1.1.2 (install, removed than re-install two day later)
- Ringtone Manager v3.0 (softreset included)
- * scorpio16v 4icons_in_row
- * jizy HTC Action Screen
- * Nadavi HTC Diamond - Improved Connection Manager
* Installed one after the other, then softreset at the end.
As i wrote, i tried to uninstall all apps but the problem persist. I'm not an WM Mobile expert, but i think the problem is not in Manila, but in WM.
This morning i find the allarm doesn't start. Why? I've discovered that after connect the mobile with activesync the sms and allarm rings are shutup...then after a softreset they ring again but at the max volume, is also impossible set the sms ring at the desired volume witch ring at the max volume in any condition and any variation on the phone volume is vain, also the vibration is always off. Instead for the phone call ring and vibrate correctly.
Thanx
PS. With Resco Registry Editor i tried to find any Word, Key or Strings that can set the size of the popup window but i didn't find anything. I fink the problem is in some dll or exe files (tmail.exe?)
Hi guys !!!
In the autostart folder i founded a link to this app "MessageInterception.exe"
The name doesn't link very good...interception? hum...
So i've disabled this link and after a softreset now i've got an half-problem:
nir36 said:
When i receive an SMS i can't hear the notification sound, can't see the preview on my screen.. and the phone does not vibrate.
i checked the notification settings.. but it's all set. I tried Ringtonemanager but it's a big buggy. any ideas?
Click to expand...
Click to collapse
I've done a quicksearch and i founded an interesting thread: No SMS voice notification
Hello,
After deinstall S2U2 I have probable the Windows slider for answering incomming calls. I guess that this (please see attachte pic) is the original Microsoft slider, I am not sure. I did't see it before.
I have already try Advanced Config without success. The HTC slider was shown for 2 seconds and than the MS slider appears permanent.
How can I restore to the HTC slider?
Thanks
Daydoo
is it possible to make the phone vibrate when a call gets connected so i dont have too keep the phone on my ear or look at it while the phone is dialing. i belive the touch pro has thah feature.
Inesoft Dialer comes with this feature. Free trial.
this feature is existed by a program which is called: Inesoft
it's a great application with a lot of options
check their website
http://www.inesoft.com/eng/index.php?in=phone.html
slide2unlock s2u2 has this featue and is free
search S2U2
Is there a large dialpad similar to idialer but with smart dial (so spelling out a contacts name will bring up their number) ? or even a way to enable smart dial?
iDialer here:
http://forum.xda-developers.com/showthread.php?p=2694308
or something similar to the minimal dialer here:
http://handheld.softpedia.com/get/Skins/Minimal-Dialer-64089.shtml
but doesnt use the diamond phone canvas as a base (because of the issues with wm6.5 & the just stupid amount of ram the diamond phone canvas uses)
currently i'm using the gorgeous Ryon dialer skin here:
http://forum.xda-developers.com/showthread.php?t=508920
but the buttons are to small
Anyone know what dialer this is and where to get it?
http://forum.xda-developers.com/showpost.php?p=1336681&postcount=41
Seems to be what i'm looking for
looks like an old version of inesoft try here
http://www.inesoft.com/eng/index.php?in=phone.html
You can try Yota Dialer (search here), except it's a little buggy for me.
thanks for replies guys but Innosoft doesn't seem to have smart dial otherwise was good and ya yota is just a bit too buggy (not to mention it takes up as much space as the regular htc dialer)
anyone else have suggestions on a large button dialer with smart dial?
averma said:
anyone else have suggestions on a large button dialer with smart dial?
Click to expand...
Click to collapse
There isn't one really.
I've been looking for the same solution for a while.
Put a request for a developer here instead. I'll put my hand in for the graphics.
iconsoft phonex has smart dialing and a large keypad, I think the latest version uses a lot less ram too a simple dialpad similar to that would be great to replace the small wm dialer
Maybe o3touch brings what you want? See http://www.o3touch.com/
phonex is not bad but when receiving it interferes with the windows 6.5 lock screen, otherwise it was actually pretty good, had smart dial n everything
o3touch seems to be a keyboard not a dialer so cant really comment on that
i came across a really good 1 but its incomplete, its here:
http://forum.xda-developers.com/showthread.php?t=437296
its a VGA touchflo 2d dialer, the dial screen is perfect with smart dial and good buttons, as well the incall screen works great.
forgot to test out how it works with an incoming call and the wm6.5 lock screen (though it probably wont work that well)
but the big killer for this is that its not finished and in wm 6.5 when using smart dial the contacts all wash into eachother and become unreadable (the names will just constantly overlap eachother so its unreadable)
anyone know of a dialer similar to this but JUST the dialer, the incall screen is nice but not a big deal but any kind of custom incoming call screen will just screw with the wm6.5 lock screen
i've seen a boat loads of dialers for qvga (minimal dialer being really good) so their has to be something similar for VGA, or if their are any developers who could make 1 for 6.5
its the same dialer as 6.1 but because the lock screen already has slide to answer built in and an incall screen built in we only need to skin the actually dialer itself
and of course if anyone has a dialer they really like please share
my call screen appears frozen during call, While I am in a call, none of the soft buttons (mute, speaker hold etc.) are working the entire screen is unresponsive. i can end calls using the hard key, but that is it., i recently installed some .cab files and im new at this....here is a list of what i recently added to my HD2.
BsB, coOkie
v1.7.1,
SRS wow HD,
CHT editor,
startMenu grid,
VGA pandora,
TX Opera mobile 10
HTC diamond MP3 trimmer (...i know! i plan on removing it)
i ve figured it out, had to set "TAP time" on BsB tweak to OFF....well hope this helps another nooooob like me!
Your post with the found solution did help me to solve my problem. And I want to thank you very much for it