Related
OK, I don't know if its just my voice or what, but people are constantly telling me to speak up when I use my XDA 2. At first I thought there was something wrong with the mic, so I tried another XDA 2 and still the same soft volume.
I've tried changing the microphone gain option, but no difference.
Is there a way of tweaking the microphone gain via the registry or some software that can do this?
I love this XDA, but its driving me nuts that I have to strain for people to here me. :?
I have the exact opposite problem... People complain that my voice is TOO LOUD! and that's because the default setting for the MicrophoneAGC is OFF so I need to constantly turn it ON... (well, at least after every soft-reset)... :roll:
I'm not sure if this will work but you can use a registry editor (if you know what you are doing that is...) and go to: \HKLM\System\CurrentControlSet\AdvencedCPL\
There you'll find the InputGain, MicrophoneAGC settings (you can always use the software setting for MicrophoneAGC, but there is no equivalent for the InputGain setting)...
Let me know if that works...
Rayan
yeah ... it's a bummer the default being mic agc 'off' isn't it?. It would be really useful when trying to use the unit in the car with voice command if it was default 'on'
Mike
Yeah, actually I created a shortcut that every soft-reset the first thing I'll see on the screen is the Microphone Gain setup so that way I don't forget to set it.
To create the shortcut using Resco Explorer go to windows directory and copy the ctpnl.exe and then navigate to Startup folder (under windows) and create the shortcut there, then select the just created shortcut and under properties click the shortcut tab and type "\windows\ctlpnl.exe" mycpl.cpl,3
Best regards,
Rayan
Hi. I posted an inquiry about a clock program that could be linked to a bluetooth headset, but there wasn't a response so I figured it wasn't available. A few weeks later, I was informed that Voice Command allows one to get the time by giving a vocal command. However, I didn't see that function listed on the Microsoft website. It got me wondering if there was a program that gives the time through the speakers (audible clock)? It would be nice to get the time quickly without having to pull my phone out of the holster to see the time (I don't like wearing my watch). This would only work if one could map it to one of the buttons and have it turn on even in standby mode.
MS Voice command (VC) can tell you the time. You need to 'ask' for the time. It is not 100% accurate (70%), and it is definately much faster to look at it rather to push the button to activate VC, 'ask' for the time, wait for it to recognise what you are saying, and listen carefuuuuly what it said (if you are lucky that it recognise what you are saying).
There is an app that tells you the time at a specific intervals (I don't think it does on-demand-time-telling), not a full blown stable release though. Do a serach in this forum.
I would like my phone to fetch my letters from the box when they arrives. Anyone with that software?
Thanks for the reply. Is the accuracy problem based on coming out of standby? I noticed that it takes a brief moment to adjust the time when coming out of standby. When I performed a search on this forum, I didn't see such a program, but I might have restricted the search to only the Wizard forum. Perhaps I need to expand that search. Certainly, a Google search did not yield what I wanted.
The accuracy I meant was, whether it will do what you told it to do. Example, if you asked for the time, 30% (depending on your surrounding noise level), it may not recognise the command, or probably dial a number for you
Hmm.. I must admit, it is much difficult to search for that application that I've mentioned. I'll try and let you know if I got it.
found this... not the one that I'm looking for.. it is not free.. and rather heavy
http://vitotechnology.com/en/products/voicereminder.html
Thanks for looking. Yeah, you were right. It isn't quite what I'm looking for. It looks as if Voice Command is the only program that has the feature I'm looking for. Thanks again.
Long shot.. but this seems to do what you want
http://software.pocketpcthoughts.com/product.asp?id=10422
again, not free (not the one I remmebered)
Thanks for looking. I found an audible clock!!! And it's free.
http://www.grapefruitopia.com/smartphone/clock.shtml
It works for WM5 phones and it has to be installed in the storage card. I had it link up to the bluetooth through the Voice Speed Dial function on the Settings menu. I had to create a shortcut and paste the shortcut to the windows/programs folder.
The clock is audible. I haven't figured out how to make it go through the Bluetooth headset yet. I tried to toggle the headset with BTAudio, but when I use the headset to get the time, the headset will toggle back off. If there was a way to keep the headset on for about 3 seconds after the device receives the voice input, then I would be able to hear the time on the headset. This feature would be get for crowded areas when one can't hear the speaker.
Anyone know of a registry hack that might be able to keep on the headset for a few seconds while the time is being announced?
Thanks.
Okay. Got it working. For those who would like to use the BT headset to get the time, here is a way. Download and install the SpeakingClock program (link above) into the storage card. Download and install BTAudio (Toggle version). Download and install MortScript. Write a script to batch both programs to run in sequence.
Example:
#MortScript BT and SpeakingClock
Sleep (500)
Run ("\Program Files\BTAudio\BTAudioToggle.exe")
Sleep (1000)
Run ("\Storage Card\clock\SpeakingClock.exe")
Sleep (3000)
Run ("\Program Files\BTAudio\BTAudioToggle.exe")
Save as a .mscr file and place it in the MortScript folder. Create a shortcut of the script to the \Windows\Start Menu\Program Files folder. Use Voice Speed Dial on the Setting Menu to link a voice command to the script and you have a free speaking clock through your BT headset.
Of course, I guess it would be easier to wear a watch...but, I don't wear one.
- Cheap watch - $10
- Bluetooth head set - $40
- PDA Phone - $400
- Able to tell the time with your PDA through your bluetooth head set without looking at your watch (if you have one) - priceless
Application is designed to control BAG (Bluetooth Audio Control) service state on Windows Mobile systems. It can enable/disable audio/microphone routing to Bluetooth headset, set volume and microphone gain, enable/disable voice command launch application.
Writing this little piece of code was inspired by inability of AGEphone Mobile (ver 2.71) to collaborate with Bluetooth headset.
Really it can be used for other purposes as well. You can make some useful shortcuts or use it in some scripting language.
It is “command line” application (no GUI). Command line switches controls application behavior.
There are two working modes: “keep resident” (default: able to save and restore all settings) and “on fly” - for quick change.
Application itself and documentation with samples in attached file.
Thanks alot i'm downloading now!
gui in next ver?
Thank you very much for writing this! Your utility goes alone perfectly with AGEphone Mobile and is perfect for anyone who wants to use a BT headset AND voice command - highly recommended vs. the standard "BTAudioToggle" !
I'm trying to get this to launch via startup to see if it will work with my bt headset and voice command.
I'm just using "\Windows\bagctrl.exe /O"
as my shortcut link but it gives me an error the app isnt signed..I assume I'm probably just an idiot and not making my shortcut right..Can anyone help me please?
vidmabal said:
Application is designed to control BAG (Bluetooth Audio Control) service state on Windows Mobile systems. It can enable/disable audio/microphone routing to Bluetooth headset, set volume and microphone gain, enable/disable voice command launch application.
Writing this little piece of code was inspired by inability of AGEphone Mobile (ver 2.71) to collaborate with Bluetooth headset.
Really it can be used for other purposes as well. You can make some useful shortcuts or use it in some scripting language.
It is “command line” application (no GUI). Command line switches controls application behavior.
There are two working modes: “keep resident” (default: able to save and restore all settings) and “on fly” - for quick change.
Application itself and documentation with samples in attached file.
Click to expand...
Click to collapse
Many thanks, vidmabal - it works like a dream and does exactly what I was looking for!
MrDSL said:
I'm trying to get this to launch via startup to see if it will work with my bt headset and voice command.
I'm just using "\Windows\bagctrl.exe /O"
as my shortcut link but it gives me an error the app isnt signed..I assume I'm probably just an idiot and not making my shortcut right..Can anyone help me please?
Click to expand...
Click to collapse
Yes, application is not digitally signed.
If you want to use it you first must enable not signed applications (but there are plenty of them around).
To do this you can use "Advanced Config" or alternatively set registry value with some registry editor. "Total Commander" or "Resco explorer" can help you performing this task.
Registry key is "HKLM\Security\Policies\Policies" value name is "0000101a" (if not exists create new DWORD value) and must be set to 1.
P.s. I really don't know why you want to run it on startup and expecially with /O key
eazy2001x said:
gui in next ver?
Click to expand...
Click to collapse
Really not.
Application is designed to run without user intervention.
That’s why even all errors are silently ignored: no MessageBox for invalid keys or some other errors.
Even I don't see what GUI can be helpful. Except maybe for microphone gain changing. Volume normally has control keys on Bluetooth device itself.
Of course you can use it with Mortscript or some other scripting language and make some interface in here. Error codes returned (not present in attached document)
0 - No error (all OK)
128 (0x80) - Error redirecting audio (normally occurs if Bluetooth device is not connected)
129 (0x81) - BAG0: device not found
130 (0x82) - Invalid command line parameters
since u coded this, ive got a small question. do u think there is any chance to disable a remote microphone and use the internal one instead?
im asking this because the mic from my car radio totaly fails its job (JVC KD-BT11) and the internal from my phone (x1) is far supirior to it.
Nice work man, just find my bt headset behind the microwave oven (my girlfriend didn't know anything)
I'm going to write a small mortscript to controll the commnd line.
vidmabal said:
Yes, application is not digitally signed.
If you want to use it you first must enable not signed applications (but there are plenty of them around).
To do this you can use "Advanced Config" or alternatively set registry value with some registry editor. "Total Commander" or "Resco explorer" can help you performing this task.
Registry key is "HKLM\Security\Policies\Policies" value name is "0000101a" (if not exists create new DWORD value) and must be set to 1.
P.s. I really don't know why you want to run it on startup and expecially with /O key
Click to expand...
Click to collapse
I'll have to look into it more but I already have advanc config to run unsigned apps..
achmed20 said:
since u coded this, ive got a small question. do u think there is any chance to disable a remote microphone and use the internal one instead?
im asking this because the mic from my car radio totaly fails its job (JVC KD-BT11) and the internal from my phone (x1) is far supirior to it.
Click to expand...
Click to collapse
The application has nothing common with Bluetooth transport. Really it only send control codes to BAG service (Bluetooth Audio Gateway). This one is coded by Microsoft. I think other BT stack providers (for compatibility reasons) also supports such service.
According to documentation there is no such control code to enable only audio and leave microphone untouched. (Maybe there is, but undocumented, as M$ like to do).
Also it depends on BT profiles your device support. Maybe it has some "stereo headset" without mic?
Here i made a mortscript gui for this tool:
just extract to \Program Files\BTAGC
all files are included
Now make a shortcut of config.mscr in your start menu
vidmabal said:
The application has nothing common with Bluetooth transport. Really it only send control codes to BAG service (Bluetooth Audio Gateway). This one is coded by Microsoft. I think other BT stack providers (for compatibility reasons) also supports such service.
According to documentation there is no such control code to enable only audio and leave microphone untouched. (Maybe there is, but undocumented, as M$ like to do).
Also it depends on BT profiles your device support. Maybe it has some "stereo headset" without mic?
Click to expand...
Click to collapse
The radio itself offers "Bluetooth Headset" and "freespeech".
i tried to disable the freespeech (bluetooth settings in winmo) but somehow my phone still uses the radio as microphone.
guess i have to get my soldering iron and make some hardware mods to my radio. looks like disabling a bluetooth mic isnt going to work.
PS: but thx
old post i know, but do you know if there is a way to display the error msgs on screen somehow ? I think im getting errors.
Pytte said:
old post i know, but do you know if there is a way to display the error msgs on screen somehow ? I think im getting errors.
Click to expand...
Click to collapse
Really there is no much error processing here. But you can try to start app from say Mortscript and examine return code. See message #8 for return codes.
Thanks for your effort put into this.
Could you please confirm if/how is it possible to do just one thing:
1. Cyberon Voice Speed Dialer installed on phone.
2. BT button does not invoke it (audio route opened, and dialer screen opened, but no Speed Dialer. Reg Key exists)
3. Can this program help do it? (which mode resident/on fly, which extension to exe file and how to launch it (start-up or something else))
Many thanks in advance!
Thanks
Thanks a lot vidmabal, this is what I was looking for.
Cheers
Will this program work on an HD2 which i think uses a widcomm bluetooth stack??
dino_Donis said:
Will this program work on an HD2 which i think uses a widcomm bluetooth stack??
Click to expand...
Click to collapse
Really I don't know.
I am operating with service "BAG0:" ("Bluetooth Audio Gateway") - you can check if it is present in your system.
1. Launch Fdsoft Task Manager
2. Go into "Services" page.
3. Check that you have started service BAG0:
Alternatively you can check it in registry:
HKEY_LOCAL_MACHINE\Services\BTAGSVC
(Service name can differ, but "Prefix" value must be "BAG" and "Index" must be 0, "IsEnabled" value must be 1)
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.
I've installed MP-NT.cab by derliebewolf (http://forum.xda-developers.com/showthread.php?t=471317) and understand that it is not convenient for me. First, after installing
MortScript, shell32.exe became to charge CPU of my X1 at 100%. Second, I want at least 2 actions from the headset: play\pause and
next track. After analysing derliebewolf's script, I understood that I can write more advanced programm.
How to use
Run SetupMPXHeadset.CAB from the attachment and install the programm. Press the Microphone Button on the headset and hold it for
about 2 seconds. If MortPlayer is running, you'll hear a "ding" sound. After hearing this sound you can act 2 ways: 1) release
the button and press & hold it once again - than you'll jump to the next track; 2) Release the button - than you'll pause\play
the track. If MortPlayer is not running, press & hold the button to run voice dialer programm (by default the standart dealer is
chosen). You can change MortPlayer commands and voice dialer programm by running "Setup MPXHeadset" from Programs menu.
At the first run a warning message about unsigned program can be shown. You should choose "Yes".
Thanks
Derliebewolf for an excellent idea
Mort for the best PPC-Player
P.S. This is the programm I've finished writing a few hours ago, so there can still be some bugs in it. If you find any, write here about it and I'll try to do my best to fix it.
I can give the source code if anybody is interested.
Update:
Added SetupMPXHeadset.v1.CAB - a new version with improved settings dialog
Added mpcNotifyc.src.zip - Source code (VS 2005 solution)
thanks mate....i thinks its betta den da previous one......
if u can send me its source code....plz doo send me....i would like to have a look at it....
Works pretty good Only I switched the two actions cause I skip more then I pause.
Is there a way to make it faster? So that when the "ding" comes it will skip to the next song immediatly?
I don`t pause very often, I just take out the ear plugs if I need to hear something..
dekeijzer,
if you want to use 2 commands, it is not possible to make it much faster (((
But I can make second command optional, so this programm will able to work the way like derliebewolf's script.
Well I decided I liked to have 2 options anyway .
But, there is a bug in the program. When I get a text message the player skips to the next song!
I switched the "next" and "play" commands so that 1 press is "next". I allso hear the same beep as when I press the button on my headset...
@coldhurricane:
Nice work, sounds promising! What really bugs me (and neither my, nor your programm can solve that) ist the absence of a full-featured remote. With at least three to four buttons. But you managed to get a step closer to it, congrats.
Anyway, I'll stick with my solution, as I do not need play/pause...And I was just sharing what I "developed" for myself
dekeijzer,
I can't repeat you bug with song change on my device...
Maybe, you have some program on your device which maps incoming text message as voice deal???
derliebewolf,
I did the same
n95 remote
is there a way to use the n95 remote, it is full featured.
regards
t.
Wow! Great work dude. This is one hell of a nice app. Though I hate the interface of Mortplayer, because it is so god damn uggly. Is there not a way you can make this work on the Touch flow 3d player or something?
Awsome work anyways, thanks for your share!!