Can anywhere explain to me what the repeating orange led means, its a faster beat then any of the other lights etc bluetooth, wifi and phone but it has no reference in my manual and cannot find it anywhere,
Cheers
Exemike
it is just a reminder.
it shows you missed calls or unread messages.
btw: i have another problem:
does anyone know how to restore the orange / amber led?
is there any tool or registry edit to restore it?
because my phone only flashes green, maybe it happend when i flashed a different rom...
Related
The JAM manual says there are various LEDs. For example, flashing blue when bluetooth is on. Flashing orange when the radio is on. Those are fine.
But there's also supposed to be a flashing red for alarms, notifications, etc. I've tried letting appointment reminders and clock alarms go off (yes, with the notification settings indicating that the light should flash) but all I get is the steady orange flash that indicates the radio is on. I've tried push email from Sproqit too. In fact, even after all alarms are dismissed and the radio is off, that orange light STILL flashes until I reset the device.
I've tried many Windows Mobile devices and never seen this before. Is this a JAM problem in general, or just my unit in particular? With that orange light always flashing and nothing else, I can't tell if my JAM has mail for me unless I turn it on.
Thanks.
Hi, om my MDA Compact the LED flashes GREEN when the radio is on and RED when I have a recieved call, notification, email or SMS. However, despite the optimistic naming of the color RED, in reality it is only orange, the same as when the device is charging. When you are charging the device and you miss/receive a call/notification/alarm/SMS the LED will flash orange, to show you missed an event. I Hope this helps, the color of the LED is not red, only orange
Hi,
I have 2 issues with the TP2...
a) Keyboard Light - can it be set to a different value? Seems it is set to around 10 sec - tried Advanced Config..but that doesnt seem to work..also cudn't find anything in the Registry yet.
b) LED - the LED only seems to work during charging(Red/Green solid) = any program/Registry hack to use the LED for other Options (eg "new Mail" = Red blinking)?
Hope someone has the same issues and found a solution already
Thanks!
Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.
Yea I would like the keyboard to stay lit longer as well. For the LED notifications make sure you select the "flash light for" in the sounds & notifications settings.
But it will not blink when there is missed call or sms when you are charging the phone though.
I don't have that problem with my previous X1.
LED & Keyboard Light
Hi Guys,
thanks a lot - stupid oversight of mine in reg to the LED
However still looking for the Keyboard Light..I used Advanced Config and set it to 30 sec..but that doesn't seem to work.
Also looked into the Registry but cudn't find anything related there as well.....
Cheers!
What are the reg entries for the LED lights? I would like diff colors as well
yes me too. please post your solution
I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.
Scann69 said:
I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.
Click to expand...
Click to collapse
Thats what I meant, different colors for different notifications
ohyeahar said:
Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.
Click to expand...
Click to collapse
I guess its too bad then that the manual doesnt say this functionality is BROKEN.
i had to turn it off as it would continue to blink even after I cleared the notifications.
chongbh said:
But it will not blink when there is missed call or sms when you are charging the phone though.
Click to expand...
Click to collapse
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe
JRakes said:
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe
Click to expand...
Click to collapse
guys google nueLed that might work its an old program that controls the Led in many ways
I've seen references to nueLED, but also read of several issues with it on the newer devices (TP2s in particular.) I'll do some searching later today and see if I can come up with a later version and/or higher confidence level that it won't give me problems.
Thanks for the suggestion! Anybody else?
Well, I managed to do a bit of research about NueLED today. I keep finding too many comments in various threads on various forums that mention problems, particularly on TP2s and even more particularly with WM6.5. Perhaps most are overblown - I honestly don't know. But it's enough to give me pause. Above all else, I need to keep Touchie as stable as he is currently. That said...
Can anybody confirm that NueLED works reliably on the T7373 w/ WM6.5 (official HTC SEA ROM update) with no instability or quirks?
Beyond that, can somebody confirm that NueLED provides an option for the notification LED to blink even when connected to power? That is really my only interest. I'm fine with the current setup & colors, but would like the LED to blink for an alert when the device is in the cradle.
Thanks, as always, for the help and suggestions!
I've had my Hero about, well, 48 hours. Previously I had the Magic until I lost it
Anyway I used the SMS POPUP app on my Magic and you were able to change the colour of the LED flash for when a new text was received. I would change it to say blue on my Magic, so then the LED would flash blue for a new sms and green which was default for emails.
Now I'm on the Hero, installed SMS POPUP and even when I select to change the LED colour to blue, red, orange whatever, test it and it just always flashes green.
I tried another app called MISSED REMINDER and even when i tried to change LED colours with that it would only always flash green.
I think the LEDs do work correctly as it goes orange while charging and then turns green when charged.
Basically can someone check to see if they can change the LED colour in SMS POPUP?
Thanks.
I take a look at the app and also wasn't be able to change the LED colour.
Thanks, I was looking around some reviews and I have seen a few times where it says the LED can only change between green and orange. Seems weird that the Magic could handle multiple colours yet the Hero cannot.
I remember seeing it flash blue and even red. Dont know how or why but I am pretty sure I saw it.
orange and green is all i've seen
Orange = charging
Red = Battery beneath 15%
Green = Fully charged
Blinking green = E-mail in your gmail account. (or a peep update)
For sms only the trackball blinks (white) it also does that when recieving a pop3 mail (for example your providersmail.
I don't know how to get a blue led though
Roy_Drage said:
I've had my Hero about, well, 48 hours. Previously I had the Magic until I lost it
Anyway I used the SMS POPUP app on my Magic and you were able to change the colour of the LED flash for when a new text was received. I would change it to say blue on my Magic, so then the LED would flash blue for a new sms and green which was default for emails.
Now I'm on the Hero, installed SMS POPUP and even when I select to change the LED colour to blue, red, orange whatever, test it and it just always flashes green.
I tried another app called MISSED REMINDER and even when i tried to change LED colours with that it would only always flash green.
I think the LEDs do work correctly as it goes orange while charging and then turns green when charged.
Basically can someone check to see if they can change the LED colour in SMS POPUP?
Thanks.
Click to expand...
Click to collapse
If you're unlucky you're likely to join the bunch of us that the LED's and the headphone jack stops working for.
Thiesen said:
If you're unlucky you're likely to join the bunch of us that the LED's and the headphone jack stops working for.
Click to expand...
Click to collapse
Yeah have started reading about this.
Hopefully I'll be lucky though, haven't even had the phone 3 days.
The lights do work fine (orange and green and red), it's just on the Magic when using the SMS Popup app you could change the colour of the LED flash for when receiving a txt. Where as on this phone it's always green regardless of what colour I select from within SMS Popup.
Headphones still working, phone would be going straight back if that clonked out!
Roy_Drage said:
Yeah have started reading about this.
Hopefully I'll be lucky though, haven't even had the phone 3 days.
The lights do work fine (orange and green and red), it's just on the Magic when using the SMS Popup app you could change the colour of the LED flash for when receiving a txt. Where as on this phone it's always green regardless of what colour I select from within SMS Popup.
Headphones still working, phone would be going straight back if that clonked out!
Click to expand...
Click to collapse
I will be holding out for that rumored update though... who knows... it might be a software issue *crosses fingers and prays to God... uhm... no wait... HTC*
Hi, in fact i have rooted my phone, and put the original sbf file that i found on the site but i noticed that my led notification on my milestone 2 is not working anymore. It was before i change the rom and go back to the 2.3... I've tried many apps as led me know, flow light etc... (all i found in fact) but i did not find any solution... Please help me to get this light on
Anybody please help... (UP)
The LED notification will only flash with the screen off. So if try an app to test the LED, don't forget to turn the screen off.
Yeah of course i did it. But it seems to be a constructor problem... the LED must have died xD . Well now i really want to know when i have a sms and i remember to have seen a program that permit the shortcuts in the bottom of the milestone 2 to blink. Anyone knows this app? anyone has a solution so i get a notification of sms received?
Hi
I have my blue led notification light on all the time. It doesn't flash but just stays on even if my switch my phone off.
all other notification work like if i get a message, missed call also flashes etc
phone is currently rooted with Omega rom, i have tried 3 roms with clean installs but still the same issue.
Any one have any idea with whats wrong with my device?
Many thanks