Database Users

Big Problem My Gps Don't Work

I have a big problem with my enorme CRUISE impossible to activate the GPS to find it with nimporte browser TOMTOM; GARMIN, NAVIGON impossible detects the GPS receiver in my CRUISE Please help me HTC HAVE he forgets to save as a receiver for the driver of the chip qualcomm grrrrr.
For info on any version TOMTOM confused impossible to choose the COM port after the selection of other NMEA (the other choice being blutooth) it does not m'affiche Webster brings me directly to page you want a Cree I no longer know What or card
Ditto when a NAVIGON impossible to choose the COM port of choice are ormi the COM port: 7 entitled COM7: SERIAL_BTUR
GARMIN When he has no choice from the blutooth and nothing else
I precise that any such complete its version specialment for PDAs and pocket PC.
And a trick that is very bizar when I clik on the button at the bottom left of that calls for the button to launch the dison is the latter launches GPS box reception SMS / MAIL I understand nothing Please help me before I lemboite in a wall by an otherwise ralbol SVP
Com regarding tomtom said previously he does not show this part or I propose to choose my COM port I can not find this page
SORRY FOR MY ENGLISH

Traduction/traduce
j'ai un gros enorme probleme avec mon CRUISE impossible d'active le gps de le trouver avec nimporte qu'elle logiciel de navigation TOMTOM; GARMIN,NAVIGON impossible de detecte le recepteur GPS de mon CRUISE SVP aidez moi HTC AURAIT il oublie de mettre un recepteur comme pour le driver de la puce qualcomm grrrrr.
pour info sur TOMTOM toute version confondu impossible de choisir le port COM apre la selection de autre NMEA (les autre choix etant blutooth) il ne m'affiche pas cette page il me met directement a la page voulez vous cree une base je ne sait plus quoi ou la carte
quand a NAVIGON idem impossible de chosir le port COM de sont choix ormi le port COM:7 intitule COM7: SERIAL_BTUR
GARMIN Quand a lui aucun choix possible a part le blutooth et rien d'autre
je precise que toute ces version son complete et specialment pour PDA pocket PC.
et un truque qui est tres bizar lorsque je clik sur le bouton en bas a gauche de celui d'appelle le bouton pour soit dison lancer le GPS ce dernier lance la boite de reception SMS/MAIL j'y comprend plus rien SVP aidez moi avant que je lemboite dans un mur par un ralbol SVP sinon
concernant tomtom com dit precedement il ne m'affiche pas cette partie ou il me propose de choisir mon port COM je n'arrive pas a trouver cette page

i would suggest you uninstall tomtom. check that when u go to start/ settings/system/ external gps and then in programs COM4, Hardware none, 4800 and Access manage GPS automatically (ticked).
reinstall tomtom and allow a few minutes (although it should get a fix in a minute or less) to get a signal. if it doesn't fix after a few minutes then check the settings.
if i am not mistaken they should be
other NMEA GPS receiver
GPS baud rate = 4800
GPS is connected to COM4
don't touch the screen more than once for every option. it may take a couple of seconds to move from one option to the next. if you touch the screen twice though, you will miss some of the settings.
hope this is helpful.
you may find this helpful
http://forum.xda-developers.com/showthread.php?t=330235

thank for you help
but im ready tested this method anything soluce work with my CRUISE

And I tested software nomé TEST GPS to find the port on which it is located my GPS he scanned for 5-10 minute and nothing found not a trace of GPS on a port I become crazy I think HTC I forgot to put a chip on my gps CRUISE my GPS or died, and yet it's only 3 days I have between hand I did not even benefited GRRAAAAAAA GRRRRRRRRRRR HHAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
PLEAS HELP ME SAID ME THAT MY CRUISE WORK FINE PLEASE FIND A SOLUCE FOR ME I WANT USE THE ORIGINAL ROM BUT I DON'T NO HOW USE .RAW FILE AND HOW TO UPGRADE MY DEVICE I REMINBER WHITH MY PROPHET it'S SO EASY (actysync>click on ROM update and it's OK now the files is .RAW and i don't no how read this which soft use to open

doog said:
thank for you help
but im ready tested this method anything soluce work with my CRUISE
Click to expand...
Click to collapse
If nothing else work, then you need to hard reset your device.
1. Go to start>settings>clear storage>(enter)1234.
2. After the set up of the system, Install Tomtom first before you install anything else.
3. Run QuickGPS and then go outside and run Tomtom.

RESOLVED
THANKS VERY MUCH
Tout dabor je tien a vous remerci pour votre soutien qui ma donner le courage de ne pas jetter mon cruise dans le mur
donc voila cette apres midi assi dans mon salon desesperé je me dit v essayer une methode vielle d'hier sur les s100 et autre
Hard reset avec maintien des deux touche (GPS+INTERNET) +appuy sur bouton reset tout en maintenant les deux bouton apres le tel me dit appuyer sur sen donc bouton deccrocher jappuye il reinitialise l'appareil dans le fond car j'avai essayer juste avant dans parametre avec 1234 aucun resultat Bref je continu je lsuis les instruction etc...je regle lorloge et c la que tt ce joue je pense du moin pour mon cas ce qui a remedié a mon probleme, j'appuye sur lecran pour demarer linstalle;linstalle commence dans 3sc qu'il me dit et la j'en veut PAS DE CES PARAMETTRE SFR QUI FOU LA MERDE DANS NOS MOBILE; des quil commence linstalle j'appuye sur le bouton RESET il redemare le tel est nu de toute configuration sfr et la je l'ance quickGPS comme me laver dit un forumer apres j'installe TOMTOM reglage et la miracle il m'affiche le chois du port 4 ET PROBLEME RESOLU GPS MARCHE A MERVEILLE MEME DE MON SALON TROP FORT

RESOLVED
While I dabor tien has remerci you for your support, which give my courage not to launch my cruise in the wall
So voila assimilate this afternoon in my living room I said desesperé v try a First, I had tien thank you for your support, which give my courage not to launch my cruise in the wall.
So this afternoon assi sad in my living room I said I vai try a method old yesterday on s100 and another.
Hard reset with maintaining the two key (INTERNET GPS +) + pressing on reset button while maintaining the two button after the device tells me to press send button deccroche j'appuye therefore it reinitialise the device completely because j'avai try just before parameter in 1234 with no result REYJABS thanks to you for the rest, I continued to follow the instruction ... I rule and the clock is the plays that anything less of me for what has resolu was my problem, then j'appuye on lecran for demarer installation, the installation begins in 3sc tells me the camera and I want NO SUCH PARAMETTRE SFR FOUt WHICH THE MERDE IN OUR MOBILE, and that it started in linstalation I supported the RESET button redemare it is the bare of any configuration sfr and I start washing me like quickGPS said REJAYBS TOMTOM after installing, configuring, and the miracle it m'afiche what port AND 4 PROBLEM RESOLVED GPS works perfectly too strong

doog said:
REYJABS thanks to you for the rest, I continued to follow the instruction ... AND PROBLEM RESOLVED GPS works perfectly too strong
Click to expand...
Click to collapse
Glad to be of help!!!!!!!!!!!!!!!

Time to time reseting....

Hi all,
Since this morning, I have experienced problems with my phone. The power does not want to keep ON.... It goes automatically OFF after a few seconds, and if I want to power ON again, it goes trought a soft reset.! (even with a hard reset). It did not do it before.
I have charged the battery a night long, and the inidicator shows 100%,
Is there anyone with this bad expererience ?
What shoud I do ?
Thanks for your responses.
========================================================
Bonjour a tous,
Depuis ce matin, mon bouzin ne souhaite plus rester allumé. Il s'etteind totalement apres quelques minutes et lorsque je veux le réanimer, il fait automatiquement un soft reset....pour s'eteindre une nouvelle fois apres quelques secondes...
L'icone de la batterie indique 100% ou 90%. J'ai procedé a une recharge totale cette nuit.
Est ce que quelqu'un a ce problème ?
Comment le supprimer ?
merci pour vos nombreuses suggestions
=====================================================
I am using faman 4.02

Hi
Try with another battery if do the same go to htc!

problem with bootloader

english
Hi
this the summary of my pb. I tried several ROM on my artemis and it has always succeeded without pb. until recently I used a new Rom entitled "Oops Black" and it has worked well. and I tried to install the radio ver 03.21.90. the installation is finished until the end. but when I wanted to restart artemis, the first screen that indicates the version of the Rom and radio ... appears followed by the splash screen and it stops and freez.
I tried to do a hard reset without success. it never succed to enter the bootloader. I use the correct method of hard reset. (pushing the two soft key and then with the stylus push the reset key). I also attempted to install a new rom directly from the sd card following the procedure described in this same forum. without success.
in the abstract artemis never succed to enter the bootloader to install a new rom. is there any solution for this kind of pb. or less if I understand what's wrong.
thank you for your responses. and thank you for this forum
french
Bonjour,
voila le resumé de mon pb. j'ai essayé plusieur ROM sur mon artemis et ca a tjrs reussi ss pb. jusqu'à dernierement ou j'ai utilisé une nouvelle rom intitulé "Oops Black" et ca a bien marché. et j'ai tenté d'installer la radio ver 03.21.90. linstallation aussi c'est terminé jusqu'à la fin. mais kd j'ai voulu redemaré mon artemis y a le premier ecran ki indique la version du rom et de la radio... ki apparait suivi du splash screen et ca bloke.
j'ai tenté de faire un hard reset sans reussir. cela ne passe jamais sur le bootloader. et je signale ke j'utilise bien la bonne methode du hard reset. ( apuiller sur les deux soft key et puis avec le stylet pousser le reset key). j'ai aussi tenté d'installer une nouvelle rom directement de la sd card en suivant la procedure decrite sur ce meme forum. et ss reussite.
en resumé l'artemis ne passe jamais en bootloader pour pouvoir installer une nouvelle rom. est ce que klk'un a une solution pour ce genre de pb. ou du moin si je px comprendre pkoi ca passe pas.
merci pour vos reponses. et merci à ce forum

English please...:S

Rules state that any posts in a language other than English need to be posted with an English translation
Google...

Black screen problem solved.
Hi all:
In my case was SD HC card inside phone.
Regards

Impossible to align the screen to revert SPL

Hello.
My touch dual has a big screen problem.
The screen is broken I think , when I clic anywhere on the screen it gives a clic in the lower right corner.
My problem is that I have upgraded the SPL to Hard SPL 1.16 to flash ROMs.
ROMS works great but I need to to return the phone to manufacturer so I must revert the SPL to original for warrenty.
I read this thread
http://forum.xda-developers.com/showthread.php?t=369578
I understand the process but I can't run the OS to execute sspl-1.16-nike.exe.
After flashing my original operator rom windows mobile 6.0 restart and asks me to " Align the screen ", I can't pass through this step !! The screen failed to recognize my clics.
So I can't acces to windows explorer to execute sspl-1.16-nike.exe.
I'm searching for a solution to put original spl on the phone and execute it without using windows mobile explorer.
Is there a tool to flash original spl from a computer with USB ?
Can I lauch sspl-1.16-nike.exe using Mtty or other command ligne softs ?
[ français ]
Je tente de remettre le SPL d'origine sur mon Touch dual pour le renvoyer en SAV chez bouygues.
Le problème vient de l'écran qui ne répond plus a mes pressions ( une pression n'importe ou sur l'écran donne une pression située dans le coin inférieur droit... )
Après Hard reset , impossible de démarrer windows mobile car impossible de passer le stade " Aligner l'écran " du démarrage ... j'ai beau essayer une dizaine de fois je ne passe pas.
Même problème en installant n'importe quelle ROM , signed ou pas.
J'en suis donc là :
j'ai re-flashé la ROM originale sous WM 6.0
j'ai reflashé le splash original trouvé sur XDA.
impossible d'acceder au gestionnaire de fichier pour remettre le SPL d'orgine qui me permetra d'envoyer le teléphone en SAV.
éxiste-t-il un outil qui permet de flasher le SPL d'origine depuis un un ordinateur en USB ?
Est-il possible d'éxécuter le programme de flash via Mtty en ligne de commande ?

If you are able to reach it with activesync (i'm not sure you can at the alignment stage) you can use a software called MyMobiler (it's free, look on google) wich show the pocketpc screen on your pc and you can use it with the mouse emulating the tap on screens, i used it when i broke my screen, but as i said i am not sure you can use it at this early stage of configuration.

Thanks a lot , I'll try this soft today.

[Q] Problem when flashing with the latest official Rev12

Hi,
I have a phone with the last Acer official ROM and I would like to flash my phone with a custom ROM Rev12, I have already downloaded.
The problem is that the progression of flash remains stuck at 0% and it results in an error message telling me basically that my phone is not connected when it is recognized as ActiveSync.
What should I do?
French
Bonjour,
J'ai un téléphone portant la dernière ROM officielle du site Acer et je voudrai passer à une Custom ROM Rev12, que j'ai déjà téléchargé.
Le problème est que la progression du flash reste collé à 0% et ça se solde par une message d'erreur me disant en gros que mon téléphone n'est pas connecté alors qu'il est reconnu sous ActiveSynch. Que dois-je faire ?
Cordialement

Hi Xtombtz,
It's an english speaking forum, man. ;-)
I don't think that there won't be a lot of people that will understand what you mean.
If every user write in his own language, I think it will be a little bit harder.
You can use google translate at least.
PS: I've translate your request/question.
For your problem,
What did you do exactly before flashing your phone ?
Did you try to download again this Custom Rom. Maybe the one you downloaded is corrupt.Are you sure that it the right one for your phone.
starts the phone by pressing simultaneously camera and power buttons.
the screen stays black but the red LED should light up or flash , I think.
then plug the USB and retry flashing
but in this in condition, you must use the modified acer_euu.exe specially for custom Rom.
Hope it helps

Read the Flashing Guide.

Sorry to speak french, i promise to will be a warrior and speak english without google translate
Thanks for the guide but nothing new on it.
My question is : can i downdrade my phone with a custom ROM.
My phone -> V.3 official
The custom ROM i want -> V.2

Yes - but i don´t know if you are going to find a custom ROM version 2.0.
I don´t know if the Ocman´s Sense ROM is version 2.0 - you can ask him.

If i can downgrade i'm very surprised the flash doesn't work

I'm not sure but I think you have error message because the phone is not on maintenance mode, to put the phone on maintenance mode,
Keep press the camera button and volume down button.
Press the reset button with stylus (always holding the 2 buttons) Unpress reset button. Phone screen is black
And now you can release the 2 buttons.
The orange led twinkle in maintenance mode, now you can relaunch the flash utility.
Have fun
In Français
Je ne suis pas sur de la réponse, mais tu as ce message d'erreur car le téléphone n'est pas en mode maintenance (requis pour flasher, mais non indiqué dans l'utilitaire de flashage).
Pour passer le téléphone en mode maintenance :
1. Appuie simultanement sur le bouton de l'appareil photo (completement) et le bouton pour baisser le volume. (Garde les appuyés)
2. Appuie sur le bouton de reset avec ton stylet (tout en maintenant les 2 boutons précédents), le téléphone s'éteint. tu relaches le bouton de reset
3. maintenant tu peux relacher les 2 boutons, l'écran ne s'allume pas mais la led Orange clignotte, tu es maintenant en mode maintenance.
Tu peux donc relancer ton utilitaire de flashage.
Bon courage
@ woaloo : for some people, camera button is sufficiant, but for other, it is the camera button and volume down (and not power as you said). but maybe I say craps, but works for me.

You are so kind and him so hapy to have the solution that he didn't even thank you lol
Anyway, my rom is based on 3.00C FR_SFR bootloader
Hope you manage to flash the rom!

Ok, the problem was that the phone may be in "recovery mode" to flash it. Thankx