Hi,
does anyone know of a way to detect the press and release events of the earphone button? The one which is used to answer an call, if theres any?
Thanks in advance
Stefan
Related
Anyone know if it's possible to map the speakerphone to a button? I know that if you hold it down for 2-3 seconds it works but i find the delay is too low. I want to find a way to map it to another button so that it comes on instantly. Any ideas?
unfortunatley its not. Sorry
oh no.
thanks for the response.
Hi every one! i have a jasjar, and yesterday I noticed that the master microphone (the one wich is between the word imate and jasjar, the one that you use when you are in the "pda mode") doesn't function: the other (the external one) and the vivoice work fine.
When I'm in the pda mode I can't listen anything, but the others can listen me....
I've found another person which has the same problem: we have the same rom (the only one italian), so I thinked it was a software problem.
Anyone can help me? thank you very much!
no one?
Do you mean speaker? The bit you hear other people speaking from?
Does anyone know if it switches between the outter and inner speakers when using the phone in different modes? if so, is it software of hardware switching?
Sounds like its dead if its hardware. Repair shop for you.
JAmes
yeah, I mean the speaker sorry for my english.
yes, it switch automatically... I think it's an hardware problem, yes I have the warranty, but they will give me my universal back in a month and an half...
Make sure there isn't any dirt in the headphone jack which might be shorting it out.
Make a call, and see whether you are allowed to press the 'speaker on button'
If you cannot, this would suggest a jack issue.
coldpenguin said:
Make a call, and see whether you are allowed to press the 'speaker on button'
Click to expand...
Click to collapse
sorry but I didn't understood... waht do you mean with speaker on button?
There are 3 ways:
1) Press and hold the green Make call button. After 2 seconds, the speakers should turn on for hands free mode
2) Press Menu and select: Speakerphone on
3) Press call status and then click Speaker On
Gareth
Hello
Is it possible to end a call on the wizard by pressing the hands-free button? Is there some tweak I don't know about or small app ?
thanks
Andreas
anyone?
Hi Ya
Took me a while to work out but
Press the button for a second or two then release
Hope this helps
Fergy
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
ly340077 said:
Anyone have any ideas why when a call has been completed with the Itech (S38) headset the voicedial window pops up? It happens every time a call is completed, regardless of whether the call was answered using the answer button on the headset or phone. I can't find where to disable voicedialling either as I would be happy to switch it off.
It's very annoying!
Click to expand...
Click to collapse
Does this Itech headset have a feature to allow quick switching between Home Phone and Cell Phone? Like you press a button on the headset and you choose the Home phone or Cell phone? Because my plantronics allows me to do so but I wanted to check this Itech headset out because many people are talking of it and i got recommendations to buy it.
Switching
I don't beleive so. Once paired to the device of choice it just allows call answer via the blue LED button. This button also acts as the activator for voicedialling when in standby, which is where the problem may lie? It's just confusing as when not using the blue LED button to answer a call the voicedial window still popo up when the call has ended.
Replies
Any ideas anyone?
Hi everybody,
I'm not hoping to get any answers for my question (just like my other questions) but I have an issue with my Touch HD, can anybody help me?
When I'm talking to a person on the phone, pressing one of the volume rocker buttons causes the volume in the "Ring" section of the volume manager to change ... Is this normal? Or my device is faulty?
And ... even if I go to the "System" section and play with the volume rocker buttons, I feel no difference in the sound of the person I'm talking to ... What about this issue? Has anyone else had the same issue? Is there something wrong with my device? Is it something related to Auto Volume settings?
Please ............. please help me.
I have the same problem. Incoming call not loud enough and no way to fix this problem.
hi,
maybe you have changed the dialer skin to the WM-original one? If the HTC-dialer is disabled i've noticed exactly this problem (and also that the Bluetooth symbol isn't shown if BT is activated). The only way to have this working is enabling the HTC-dialer again...
bye
Bonsai Baum
Bonsai Baum said:
hi,
maybe you have changed the dialer skin to the WM-original one? If the HTC-dialer is disabled i've noticed exactly this problem (and also that the Bluetooth symbol isn't shown if BT is activated). The only way to have this working is enabling the HTC-dialer again...
bye
Bonsai Baum
Click to expand...
Click to collapse
Hi and thank you.
I've installed Inesoft Phone and hence I use it dialer for dialing, but as you also mentioned, when the number is being dialed, the original WM dialer is shown. I really like Inesoft Phone; is there any way to switch to HTC-dialer just for the "dialing" and "In call" screens?