Related
Find this from other forum. Work fine on my HTC Trinity.
More screenshot
oh its taing too much of real estate My screen area!
Does it support VGA?
Backlight working ?
Does the backlight button work with this release ? In the other version your device will freeze at bootup....anyone tested already ?
btw: seems to be the same version like in the other post....
Cheers
Edit:
Could not wait Just installed, no problems on my device (Artemis) and Backlight-button. Looks cool.
What i don't like: in the GUI-Config you can only add apps from the Programs-directory (for example: when you want to add solitaire (which is stored in "Games"), you need to move the shortcut into the Programs-Folder....or you need to add the registry-key in HKCU\Software\HTC\HTCPlus\Shortcuts manually....or am i wrong ?
But in the end.... i think i stay with HTC Home....
Works on Artemis?!
petervbeck said:
Just installed, no problems on my device (Artemis) and Backlight-button. Looks cool.
Click to expand...
Click to collapse
It's interenting that you had no problems. I also installed on my Artemis with official HTC Asia WM6 rom and yes, it works until you switch off the device. Than you can never switch it on again, only by soft reset with stylus!
So I uninstalled the prog quickly...
Otherwise it would be nice to have it on Today screen, so if someone could construct a bug-free cab from the extracted files I would really welcome it!
cheers
Anybody tried this on a Touch?
The "other" Version (as petervbeck says) in the Hermes Forum doesn't work on the Touch.
I doesn't work on my Touch!
Working on Wizard
HTC Plus is Working on Wizard!
just 2 bugs:
when you select battery status in Customization and you tab on the symbol you go to wifi settings and backlight is not working
steph
ctibor said:
It's interenting that you had no problems. I also installed on my Artemis with official HTC Asia WM6 rom and yes, it works until you switch off the device. Than you can never switch it on again, only by soft reset with stylus!
Click to expand...
Click to collapse
I'm using Tom's 4.1 full and as i said, no problems. But in fact- i like HTC Home more, but that's my opinion.... on my device i had no problem with hanging boots or something similar, i tested all the buttons....but not for a long time...then i switched back to HTC home...that's my expirience with Plus..
Cheers
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Thanks! Keep the great work!
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
I just installed your cab on my mogul. It works great. But I decide to keep using HTC Home.
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
Is the "aplication launching pad" of HTC plus finger-scrollable, or the only way to scroll is by tapping on the arrow?
TIA
Can anyone confirm that it uses less memory than HTC Home?
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
fluxist
nobody seems to answered earlier question, does this support vga?
cheers
how do you remove HTC plus!? I like it but it freezes my PPC6700 sometimes. I don't use it but I cannot remove it from the today settings menu. Thanks
I do not know if this plugin supports VGA. If you have a VGA device, try it out and let us know.
fluxist
not working in my Touch......
please help me out....
pranavd1980 said:
not working in my Touch......
please help me out....
Click to expand...
Click to collapse
Same, just adds a menu to my today settings, but no new today screen
Here is HTC G-Sensor Calibrator extracted from HTC Raphael, works as well on Diamond.
[EDIT] G-Sensor can't be calibred on Diamond since original driver doesn't consider calibration data... We need to port Raphael driver.
Diamond users, I am preparing a big surprise for you...
Enjoy!
Wow, that's awesome !
Thank You
Doesn't seem to work for me. Installed it and ran the calibration.
However, it seemed that it didn't save the calibration for me?
Using bElite 0.95.
It doen't work for me, orginal duch rom.
Its say calibration completed but the bubbels are still not in the middle.
Unfortunately for me too. On Italian Original ROM 1.37 it returns 'Calibration Completed' but after that the left-right bubble turn back un-aligned.
...
What kind a big surprise Schaps, i'm getting so curious!!!
I had the impression it was working the first time I tried... Am I wrong?
Ok I will investigate to get it fully working, I think it should be possible.
I get the same thing. The Horizontal bubble is spot on but the vertical is a tiny bit out.
When you correct it, it says its calibrated then the Vertical bubble goes back to where it was?
Strange.
Nice find tho.
Im using a standard Stock HTC Rom 1.37.405.1 WWE. Not a cooked Rom.
GalliKO said:
What kind a big surprise Schaps, i'm getting so curious!!!
Click to expand...
Click to collapse
You will know more this week-end...
schaps said:
You will know more this week-end...
Click to expand...
Click to collapse
Great, i love suprises! Thanks schaps for all your hardwork and discoveries. I speak for all the Diamond users on here im sure!
guys..how can we really make sure the phone is flat? i tried with my diamond cover off, but if u touch the edge of the phone, you still can feel actually its not firmly flatten right?
BTW..i tried out the calibration tool as well...after re-enter the calibration tool with 1st calibration done, the reading is out again
For me, it does calibrate my G-Sensor, but if i soft reset the device, it come back to the same setting
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Very impressive
Dear,
I try it on my HTC original 1.37.406.1 French the soft is beautiful but can't calibrabe. Hope it did in a few time because it seems to be usefull.
Thank you.
Sorry but no calibation on my german o2 XDA Diamond with the orginal Rom! But i´m sure you guys will solve the problem!
sergiopi said:
Schaps, it works flawless in my ATHENA using the X7510/Diamond ROM
Click to expand...
Click to collapse
The Athena has a LIS302DL G-sensor whereas the Diamond (and Raphael?) has a Kionix KXSD9.
This utility runs on my Diamond, but does not calibrate the sensor. Maybe this utility is only intended for a specific chip?
Will try it! Thanks
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Ok,
the software works for sure because it changes some registry keys under :
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\GSensor
It changes the "calibrateX-Y" keys that were all set at 0 before. I've spot it writes a very strange value for key Calibrate3-2, and I guess that's why the Gsensor driver does set them back to default values. I am trying to understand how it works right now.
EDIT: Noway!! The data in regsitry are always set to default on reset, the strange value could be a negative number in an unsigned rappresentation. The good news is that the calibration work 'til reset.
P.S.: Some of the masters could please be so gentle to advice me on what disassembler to use for ppc software ? I searched this forum but I got confused. Thanks a lot.
Calibration works but Diamond driver doesn't consider calibration data, so there is no way to calibrate Diamond G-sensor using original driver. We need Raphael driver since it will use calibration data stored in registry. I have tried to port this driver to Diamond since it has exactly the same accelerometer hardware, but it doesn't work... It may be because Diamond doesn't have keyboard (G-Sensor should be automatically stopped on Touch Pro when keyboard is out or when device is in low power mode).
uniqueboy said:
Hi schaps, since you are looking at the g sensor and the Raphael, is there any chance do you think of it being possible to get VueFlo working on the Diamond, or would it even be worth having? Looking forward to your surprise, I hope it's a rom! Thanks for your hard work.
Click to expand...
Click to collapse
VueFLO is part of my surprise
It works on few apps at the moment but I plan to support most of apps in the future (including IE and Opera of course).
Hi i have just bought HTC Cruise 09 and i want to know whether it has g - sensor or not...
Please, use search function before asking. You will find your answer quicker and you will not make everyone angry about asking for something, what was answered before.
dr.owais said:
Hi i have just bought HTC Cruise 09 and i want to know whether it has g - sensor or not...
Click to expand...
Click to collapse
Sadly there is no G-Sensor on this phone.
Cheers
Hi,
I've heard that some application can use the "vibreur" as a G sensor.
There is perhaps a solution ?!?
G-Sensor Touch Cruise 09
I Own A Touch Cruise 09 And There Is An Inbuilt Game Which Uses The G-Sensor
What inbuilt game?
hjekyll1: Are you really sure? Because Iolite do not have G-sensor, so no game can use it. To me, your post looks like bull****...
Sorry For The Big Gap Inbetween Posts I Own A HTC Touch Cruise 09 With The 6.5 ROM And In The Games Folder There Is A Game Called Marbles IN The Windows Directory There Is A Motion Sensor DLL And Auto Rotation Does Work ! Although Any G-Sensor App I Have Tryed Hasn't Worked Just Marbles
torrentonly said:
Please, use search function before asking. You will find your answer quicker and you will not make everyone angry about asking for something, what was answered before.
Click to expand...
Click to collapse
REally pathetic if people get "angry" on a message board THATS DESIGNED TO ANSWER PEOPLES QUESTIONS!!
Seriously! if everyone JUST SEARCHED!! There would be no new questions to ask! and then there would no longer be a point of having this forum..
Ease up!!!
The amount of time it took you to write like a nazi you could of just answered the guys question
hjekyll1 said:
Sorry For The Big Gap Inbetween Posts I Own A HTC Touch Cruise 09 With The 6.5 ROM And In The Games Folder There Is A Game Called Marbles IN The Windows Directory There Is A Motion Sensor DLL And Auto Rotation Does Work ! Although Any G-Sensor App I Have Tryed Hasn't Worked Just Marbles
Click to expand...
Click to collapse
Never ever! Iolite haven´t a g-sensor. Maybe, that you have seen a Iolite-clone with g-sensor, but HTC T4242- Iolite - TC ´09 - XDA Guide never has a g-sensor.
Greetings
It doesn't
Hail & ho one and all...
Thought I would create a new thread for us with working copies of Footprints to be able to show off what we can do with our TP2!!
Great idea, I am still wondering what this application can do on the Rhodium. I did found this demo on youtube, but the guy is using the HTC Touch Cruise. Can our device do the same?
PGLion said:
Great idea, I am still wondering what this application can do on the Rhodium. I did found this demo on youtube, but the guy is using the HTC Touch Cruise. Can our device do the same?
Click to expand...
Click to collapse
Offcourse it can
All you need is GPS and a Camera on your phone.
But HTC stated they will only "enable" footprints on certain camera-featured phones. Offcourse that won't stop xda-devs from releasing mods for TF3D to add it to any other phone
I'm not sure if there is an existing mod yet, but I would be surprised if there weren't.
The Rhodium does have GPS and a camera. And the latest TF3D 2.5 got a Footprint tab. But it doesn't seems to work like the HTC Touch Cruise or am I mistaken?
Hi.
I try to determine are my HTC Touch2 have GSensor.
I run some app using g sensor and it seams that part of them not work and part of them run but do not react on phone move.
I'm afraid that this phone don't have this sensor
definetly no, it dosn't have g sensor
I've got the AT&T Touch2 and mine's showing it has a G-Sensor. Oh snap!
Looking at specs on HTC site, shows a g sensor
Additional Features
- Motion G-Sensor
- Ambient Light Sensor
- FM Radio
http://www.htc.com/us/product/attpure/specification.html
Wrong specifications, diffrent phone.
This is the Touch 2, and except for the AT&T version that might have a G-sensor, the other verions do not have a G-sensor.
Hey! It is NOT same device. Lot of the differents between Touch2 and AT&T Pure. Like Camera resolution, sensors, etc.
yep, Touch2 doesn't have gsensor
G-sensor is hidden in the bottom of 3.5 phone socket...
HTC didn't equip it to all models, therefore it lacks in most of specifications.
To verify how it works go here:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it
Andrew_KYIV said:
HKLM\Software\HTC\HTCsensor\Gsensor
Change default value and try it
Click to expand...
Click to collapse
What key to insert and which value to change? Be a little more precise, please...
g sensor
how can i go there ??
I dont even have the setting
What key and value shall be used here??? Mine shows blank...
I'm confused. So HTC Touch 2 (not the AT&T ver.) does or doesn't have the G-Sensor?
I'm about to buy it, so it'd be nice to know.
Default , T3333 / MEGA / Touch2 DOES NOT HAVE G-SENSOR !
Please use SEARCH
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!
raulg said:
it is more simple to search for an issue then to ask it all over again, so please try to search first !!!!
Click to expand...
Click to collapse
Cant agree more, there is a description all over the internet, NO G-SENSOR
Thread Closed
In fact it was joke prepared to 1APR
HTC Mega was assuming to have G-sensor but HTC decided to spare on Touches.
Mega has no G sensor. Quoted registry entry is supposed to be present at any WM phone.