I am currently using the Touch-IT Vista Rom on my Wing and am cannot get the VoIP/SIP cabs to work. Installs, registers with my local IP/PBX, makes and receives calls, but there is no sound on my end. The other other end of the connection has no problem with audio. I have tried multiple VoIP cabs and drivers with no success. I have also tried different ROMs. Has anyone had any success running VoIP on the Wing/Herald?
varriano said:
I am currently using the Touch-IT Vista Rom on my Wing and am cannot get the VoIP/SIP cabs to work. Installs, registers with my local IP/PBX, makes and receives calls, but there is no sound on my end. The other other end of the connection has no problem with audio. I have tried multiple VoIP cabs and drivers with no success. I have also tried different ROMs. Has anyone had any success running VoIP on the Wing/Herald?
Click to expand...
Click to collapse
I don't use VOIP, but have you tried this.
Doesn't apply. There is no sound, not even from the speaker. I have searched and searched over the last 3 days with no fix yet. I tried different providers in case it was a codec issue with my IP/PBX. Frustrating because it seems so much better than fring and the others.
Related
OK, we can all download Skype from the official site. However, it appears to come bundled with the K-Jam with under the name
Default_SkypeForPocketPCnonxScale.CAB
Is there a difference between the two, and will the nonXScale version work somewhat better on the Wizard?
Does any one have this cab file so i can test it on my o2 xda miniS?
davidcollins01 said:
Does any one have this cab file so i can test it on my o2 xda miniS?
Click to expand...
Click to collapse
I think you can find it on the ftp of this site
nothing works for me
i dont no whats gone wrong for me...with 50+ hard resets...100+ times downloads and redownloads of all possible versions...with writting in all forums including skype....it just doesnt even open for me once....
funny but its true...i am in tears with this device as my brother in australia and me in india spend loads of money everyday....anyone who can help me have a version working on my device will get 100dollars gift...through paypal with loads of love...
one more funny thing worth to notice...everytime i write in skype about this issue a few people (same ones) just write after me how well it works for them and a few other things that dont happen for them...this just kills my querry and i have given up now...i just hate windows mobile 5 only for this.
Try this one. It's from the K-JAM extended rom.
EDIT:
File Upload does not work for me...
But you can download it here
http://rapidshare.de/files/8474397/Skype_KJAM.cab.html
I have installed the one from K-jam on my qtek 9100, and it works great over wifi.
I think it is probably the same as the the 1.2 beta on skype site...
Skype Non Xscale on XDA mini?
Hi, I got that copy of the non xscale kjam version of skype and tried to install it on my o2 xda mini and i get the message:
"Your device is not supported by the Skype sound engine. Calling functionality will be disabled"
Any suggestions?
Thanks
I tried all 3 versions (K-Jam, Offical, Offical Low CPU) and all give me equally bad results even with perfect WiFi reception. I tried calling the "echo123" test service and the voice lags and drops from time to time.
One time it worked perfectly but in the same config it didn't work on the next try.
@deepak:
If you need voip so badly mabe you should just consider another VoIP software like SJPhone which works realy well on the wizard. But of course it won't help you with skype contacts.
TcT said:
I tried all 3 versions (K-Jam, Offical, Offical Low CPU) and all give me equally bad results even with perfect WiFi reception. I tried calling the "echo123" test service and the voice lags and drops from time to time.
One time it worked perfectly but in the same config it didn't work on the next try.
@deepak:
If you need voip so badly mabe you should just consider another VoIP software like SJPhone which works realy well on the wizard. But of course it won't help you with skype contacts.
Click to expand...
Click to collapse
If I loaded SJPhone on a Wizard, what would be a good VOIP provider to use? I've only used Skype up to this point and I'm not familiar with the providers that support WM5/PDAs.
I tried the latest Skype beta and the Skype Beta Low CPU and the K-JAm non XScale version, but the Low_CPU version had a very bad sound quality. While the normal version works very well. So, althought the Wizard only has 200MHz (dual core) and the low_cpu version is for 316Mhz pda's, the wizard should not be seen as a low cpu pda.
So I recommend the official Skype Beta standard edition that is available on the site of Skype.
(Still trying to get SJPhone working with VoipBuster, I can connect, but I can't see anybody online to call, although they are online on the VoIPBuster desktop version)
CIAO!
VOODOOS!L
@Matterhorn:
I tried the german provider SipGate.de . But I think all SIP compatible providers should work.
I have MDA tmo (US). My radio ROM is 1.13.10.
While i am using streaming audio (http://di.fm), i cannot receive any phone calls and will not receive "missed call" notification either.
Is this "by design" or radio Rom issue? does anyone have the same issue with different ROM???
tokuro said:
I have MDA tmo (US). My radio ROM is 1.13.10.
While i am using streaming audio (http://di.fm), i cannot receive any phone calls and will not receive "missed call" notification either.
Is this "by design" or radio Rom issue? does anyone have the same issue with different ROM???
Click to expand...
Click to collapse
this issue is quite wide spreaded on polish pdaclub.pl forum, however in my case it works flawlessly. i've started downloading abt. 500 KB file via GPRS straight from Wizard and then called from another mobile. i could pick up this connection and after that PIE just asked me if i'd like to resume file downloading.
maybe this 'bug' depends on network, not neccessary on hardware...?
thx... you do have a newer radio rom. It'll be interesting to know how other ROM may work...
I think this is network issues and not phone. It depends on your carrier.
benfica88 said:
I think this is network issues and not phone. It depends on your carrier.
Click to expand...
Click to collapse
It is not a operator/network issue*. The same part of the network does not know simultanously that the GPRS is actually downloading at that instant AND also terminating a call. The two things are asynchronous contexts.
It's the handset radio/OS that handles the switch and pausing (if it's a class B device) of GPRS when a call comes in. This sounds like something that will be fixed/made less flakey in newer revisions.
(*although that's not to say that the behaviour will not be slightly different on various networks)
well, i was under that impression because every phone ive had from nokia to motorola to htc has this problem.cant receive a call while data is being downloaded.
eva_d said:
this issue is quite wide spreaded on polish pdaclub.pl forum, however in my case it works flawlessly. i've started downloading abt. 500 KB file via GPRS straight from Wizard and then called from another mobile. i could pick up this connection and after that PIE just asked me if i'd like to resume file downloading.
maybe this 'bug' depends on network, not neccessary on hardware...?
Click to expand...
Click to collapse
Samehere with Qtek 2.18 NL ROM on Dutch T-Mobile network: when i start downloading and i receive a incoming call, i can just answer the phone and the download is interrupted. When i end the call, i can select to continue download.
Sorry to bring back an old issue, but I think this is a ROM issue, I think on the custom 2.17 ROM it worked fine but I dont remmber for sure. THis is a big issue.
tokuro, you mentioned that you listen to streaming radio using GPRS/EDGE. Are you doing this without the audio skipping/rebuffering every 4 minutes or so? If so, how? What program/settings are you using?
Take a look at this , made a lot of research about the issue
http://forum.xda-developers.com/viewtopic.php?t=54738&highlight=
Hi All,
I thought I should start a new thread about VoiP/SIP in WM6 and the ROM "plague".
Up to now I have tried every possible "VOIP".cab on my Advantage (Athena) X7501 with partial success. I can call through 3G/GPRS and WiFi BUT no sound on my side. I know this has been reported many times, but no solution yet. What is annoying too, is that the original "SOLVED" thread is so big and chaotic that practically there is no discussion any more.
I have also tried swapping rtcdll.dll, changed registry entries in HKLM/Comm/RTC and HKLM/System/Voip without any progress on the sound issue. Additionally I have changed the ipdialplan.xml just to activate the "+" international global calling, but my ipdialplan.xml seems not to be taken into account.
I am really fed-up with this, also with WM6. WM6 is slow, far worse than Windows CE 2003 (1st edition).
I installed Skype instead. This works with sound (yeaahhhhh) but quality is crap. I could barely listen to my party and then switched back to my classic Toshiba E800 to enjoy magic quality!
The bottom line is that I think all this is ROM dependent. I don't know what MS, HTC and operators do in every country, but all these problems are very strange. It looks like the VOIP is sabotaged somewhere deep in the registry.
BTW, my Athena X7501 bears the original (latest) WM6 ROM as "cooked" by HTC in the US.
Hope my experience will save some time (and money) over 3G/GPRS connection attempts...
Hi,
I haven't seen this posted here and though some of you use it.
Skype just released a new version with 480x800 resolution support and new voice engine.
http://www.skype.com/download/skype/windowsmobile/
Regards,
Thanks for the info.
Yeah, thanks for the info. Will try it later.
thanks mate,
this'll be one of my essential apps,
Doesn't seem to fit the screen properly.
Settings menu is bigger than the screen.
Can anybody tell me is this version already fix the loundspeaker issue? Cuz the old version i cant redirect the voice thru headset, it come out at lound speaker only.
strange,
mines fine mate
InsecureSpike said:
strange,
mines fine mate
Click to expand...
Click to collapse
Mine screen OK.
Just the settings screen seems bigger.
Will have to play with it.
Didn't work on my HD. Two seconds after calling the Echo-Server the program crashed.
- Dromaius
Works well on my HD.
@madraven - Thanks for the tip!
the new skype does not work on my HD too
can you please post your rom version
Also did not work for me on ROM 1.14.405.3 - it got stuck on the logon screen and I gave up waiting. Worked fine on the PC so not a problem with the account.
Works Fine ..... :::After Restart Device::: .....
Works here too, I noticed some lag but nothing more than I would have on my Desktop PC.
Very handy to be walking around with my correspondend instead of being tied up behind the PC. ...Happy...
I'm still only getting sound through the external speaker and not the phone earpiece/bluetooth headset. Anyone else still having this happen?
Works fine on my HD, though you still have to use a headset if you don't want it on speaker.
Does not work on mine
The program does not start on my phone. I get the following error
"Couldn't find all the necessary resource files to start Skype. Please try to install Skype Again.
Skype will now quit"
I tried to resintall it, but it did not help.
I installed it on the internal memory..
Anyone else with the same problem?
Doesn't work on my HD either.
As soon as I call someone and the connection is established, Skype crashes.
It doesn't matter if I'm connected via WLAN, 3G or ActiveSync.
One thing I noticed though, when I'm connected via WLAN, Skype disconnects the network as soon as it crashes.
Soft resets and multiple reinstallations have not solved the problem.
Any ideas? (And no, I do not want to hard-reset my device.)
EDIT: Skype 2.2.0.38 works fine
works fine on mine but i was hopping Skype to start data connection by himself when i want to start Skype or when i select in Contact options "call with Skype" ...i always have to start data connection before starting Skype ...bouuhhh
brainfogs said:
works fine on mine but i was hopping Skype to start data connection by himself when i want to start Skype or when i select in Contact options "call with Skype" ...i always have to start data connection before starting Skype ...bouuhhh
Click to expand...
Click to collapse
Yes, it would be very nice if you could tell Skype to automatically connect to your WLAN or 3G when you make a call.
I found a thread where people where discussing about enabling SIP-Calls on their winmo-phones (6.0). Curious as I am, i installed the cabs and configured my phone, and voilá, i got my X2 hooked up against my VoIP-server, even if I have winmo 6.5.
For those who are interested, just follow this guide or alternatively this guide. Both guides explain more or less the same thing. What i did not get to work was the _setup.xml part, and instead of that i just used the Sip Configuration Tool that can be found over here (I used the SipConfigTool_2_0_1.CAB version).
I'm not sure if i needed this entry, but i edited this anyway:
HKLM\System\VoIP\SIP
EnablePort5060 = 1
For the unpatient:
Install this CAB: ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB
Then install the SIP Config Too: http://forum.xda-developers.com/attachment.php?attachmentid=45205&d=1185523399 and use the newly installed SIP Config Tool to configure your SIP-server + login etc. If it does not connect, then try this with a registry-editor:
HKLM\System\VoIP\SIP
EnablePort5060 = 1
Basically it worked for me, though the incoming sound was not routed into the earpiece, but to the speaker on the back.. One problem that occured was that the dialplan-file did not work for me. my next step is to check that out, and see if I can manage to get it configured for Finland..
I hope that i remembered all steps.. If something is missing, then i'll try to help out.
Disclaimer: Naturally this is up to you what you do with your SEXX2. For me this worked..
I have an X1 and I use it for SIP calling for quite some time now. I must recommend a good program called AGEphone Mobile 2.9.1.2 and the new version corrected all the bugs that I was having with this program. It will access all your contacts on the phone, and the sound quality over wifi (even public ones) is very very good.
I reccomend it to anyone that wants to use their phone for SIP calling.
Here is the link:
http://www.ageet.com/us/products-agephone-mobile.htm
Just be careful, because SIP calling drains your battery very fast. When I call for more then 30 min I disable the phone network and only enable Wifi, as that way the phone does not get as hot and the battery can last a few more hours. But don't think it won't drain about 1% of battery every 2 min, at least that's +/- what I get.
To be honest, I've tried WM VoIP and it sucked on the Xperia...
I second AGEphone... It works, and nicely
Zhariak said:
I second AGEphone... It works, and nicely
Click to expand...
Click to collapse
But.. I get the sound just in the rear speaker, and NOT in the earpiece... So this i not the best solution to talk without privacy... :-(
hertell said:
But.. I get the sound just in the rear speaker, and NOT in the earpiece... So this i not the best solution to talk without privacy... :-(
Click to expand...
Click to collapse
On the X1, AGEphone runs perfectly! (Through the ear piece!)
Zhariak said:
On the X1, AGEphone runs perfectly! (Through the ear piece!)
Click to expand...
Click to collapse
Unfortunately the case is not the same for the X2 :-( (i have tested with the Pre-MR2 firmware, and in that it did not work..)