Related
I bought the PDAir flip case for the Kaiser last week and got it in yesterday's mail. You can order it from PDAir direct -- there's also a guy on eBay selling them for $18.99.
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
3waygeek said:
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
Click to expand...
Click to collapse
Nice review, I'll probably get one.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
Click to expand...
Click to collapse
I find an 8/16GB micro sd card enough, I put the spares in my normal money wallet.
I bought one a while back and it lasted less than a month,I was using the belt clip and the leather on the back became loose and the case became useless.!
PDA Air book type case
Bought this on ebay $15 + postage another $15 to GB
I don't use belt clips, it is a little thick and tight, may wear in. I seem to buy a whole shed load of accessories initially, see what I like, and then re-cycle the rest back onto ebay.
So far i quite like it if I'm walking about, but in the office, I tend to take it out and put it my shirt pocket (why do so many work shirts these days are less a pocket!!?)
I have both PDAir and Krusell case and to be frank, I like the PDAir more. However, beware of the screwed in belt clip as it might get loosen after some time, I dropped mine once but luckily on the carpet.
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
I bought the rectangular one with the free battery and it fits great and works great. The price for the whole thing was less then half the price of a battery from AT&T. Only thing is it took almost 3 wks to get.
I'm thinking about getting another one for my office.
How about this one ? Not sure how bulky it is but it looks nice.
_www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896
RemE said:
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
Click to expand...
Click to collapse
Where did you bought your vent clip???
thanks
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
I had a 8525, for a while and now got the tilt I had tried a lot of those plastic cases and other vertical and horizontal cases, my case that I ended using a lot for my 8525 was a simple leather case with all screen and front button visible and press able, the sides were quite exposed and all buttons were functional, camera was not visible but phone was easy to take out to txt or take pics.
I am looking for a case that I can see the screen preferably without having to flip anything or take the phone out, I do not care too much about having the phone keyboard slide out.
Sadly I was not able to find the same style of case for my tilt as I have had for my 8525 on ebay to me its really nice to be able to pick up phone and then quickly put it back on your belt or on your pocket.
I have seen something close but it has a flap, and it does have the keyboard sticking out, I just want to know if this has the camera visible or not and how easy would this case be to take off?
I plan to swap batteries as I don’t like charging my phone, it heats up a lot with charging phone and battery, I always had 2-3 extra batteries for my 8525 and never had to worry about low battery I had one or 2 fully charged ready to go any time.
The case in question is this: http://cgi.ebay.com/Leather-Case-FO...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Here is another but meats even less of my requirements
http://cgi.ebay.com/FOR-HTC-TYTN-II...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
this item meets requirements but has no plastic cover over the screen, so all the dmg resistance would be at the screen protectors job
http://cgi.ebay.com/FOR-HTC-TYTN-II...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
has anyone else found something what i was talking about that is same with my 8525? i would use it if it would fit the tilt but that case does not
Thanks for directing me to the case in the 2nd link. It is just what i think i am looking for--a case which can fit a couple memory cards and credit cards, which also promises to fit the extended 3000mah mugen battery case--all things that my current seidio rubberized case cannot do.
Regarding the case which you are looking for, have you considered one of those metal cases? they don't provide quick access to the keyboard but do have cutouts for all the necessary buttons, and a physical "plexiglass" window covering the screen... from your description of what you need, they seem to fit the bill more closely.
http://cgi.ebay.com/Jet-Black-AT-T-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/SILVER-HARD-MET...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I guess, FWIW, I am currently using the Seidio case, which is very nice, as far as it goes. The fit is perfect, it looks and feels great, and it also provides me with quick and unhindered access to the keyboard and all keys & functions. But as you said, it does not have a physical screen protector (i just use a regular screen protector, and it has done fine in my pocket so far). But it doesn't have any storage for memory cards or other things, nor is it able to fit my extended mugen battery when i want to use it. when i am using the Mugen, i just have to carry the kaiser loose in my pocket, but again with the screen protector.
The PDair aluminium case may fulfil your requirements.
The buttons/camera is exposed and the screen is protected by hard plastic. Can answer phone without doing anything, and is protected quite nicely. Pop open the front cover and you can slide out the keyboard.
i guess i should restate by what i mean answer the phone i mean to be able to see the screen right of the bat with the phone in the case its the cheapo case that most oems make, simple one point button snap at top, the only hard material is the back side, the rest of the device is held by leather like straps the screen is protected with a thick clear plastic/silicon material, and the front buttons.
i dont know i looked almost at all the ebay items listed when i did a search nothing came up that was exact as the one i had for the 8525.
the case also did not add much thickness to the phone, only the leather thickness pluse the back side and the belt clip.
I had tried all those snap on plastic, other full vertical with magnet and velcro and all that stuff... i ended up using that cheap and simple case for my hermes/8525 :/ now i want same for my tilt.
i might just take a pic.
Sorry when I said hard plastic I meant hard _transparent_ plastic.
Like this:
http://cgi.ebay.co.uk/PDair-Alumini...ZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem
Unlike most here, I want to be able to put my Kaiser in a case, and put in my pocket. No swiveling, no clipping, and no holstering. I know the Kaiser doesn't have the most pocket-friendly form-factor, but hell, I have to make do with what I've got.
The slimmer and lighter the case, the more pocket-friendly it is.
Any recommendations?
I'm considering:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
& Seido's super slim rubberized case http://www.htcforums.com/kaiser-tilt-tytn-p4550-f13/seido-slim-case-t11.html
& PDAir's Aluminum case http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Be very careful of the screen in your pocket. Two of your choices will not protect the screen. Good luck.
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
GWelker62 said:
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
Click to expand...
Click to collapse
your mind reading skills are awesome!
That is exactly the way i carry mine ... With the execption of when I am at work I slip it into a leather eyeglass case I found, to keep dust and grime off it.
otheruser said:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
Click to expand...
Click to collapse
I've used this case for a long time (had a similar one for my Wizard) and really like it:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6562
Only downside is the top and bottom do add thickness to the phone overall, but during the summer when I'm wearing cargo shorts, it goes into my pocket nicely. Biggest downside is the case fits tight so if you are on the phone the slightest bump will tend to hang up the call (or other buttons get pressed). So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
depending on the size of your pocket, the krusell orbit works quite well
I use the seido rubberized one with a screen protector
psionandy said:
depending on the size of your pocket, the krusell orbit works quite well
Click to expand...
Click to collapse
Here, Here!! Another vote for the Orbit, it takes a few to get used to, but after dropping it twice, and not a dent.. i like it!
if im up to something where it might get bashed by accident then i use my PDAir's Vertical Leather Pouch, as it covers the screen nicely
mfrazzz said:
So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
Click to expand...
Click to collapse
I bought one just like the new PDAir, but it was a cheap ebay case. Best $15 I've spent - has saved the phone from a number of drops, fits really well, and still fits in my pocket (it does add bulk, but an acceptable amount and I really wanted something to cover the screen).
Everything is easily accessible, and using the keyboard is a breeze.
The only drawback is if you're slipping between a car and your pocket. I've got a metal case for it in silver (It's actually the Hermes case) that i use but most the time I don't bother. It's not been too bad. But then, I am covered by Insurance
Like the look & feel of a "simple" black leather case, but do NOT like the idea of covering the keyboard with a sheath of plastic (poor feel & seems bound to age poorly) - and so ended up with a Capdase BiFold Leather Case for my Fuze.
Posted pictures & problems with this case earlier, including some Surgery we performed to alleviate Case/Screen interaction. But while the surgery did Help, it did NOT eliminate the problem.
ALSO got concerned about reports of the top LAMINATE lifting off from the lower (button) area of TouchPros. As my screen protector has fallen prey to a similar lifting, having the laminate come up seems at least Possible.
Decided that what was needed was a cover for the TOP of the Fuze - one that would add as little bulk as possible, while both protecting the edges of the unit and providing a bit of separation between the screen and the top flap of the Capdase case (which would sometimes (RE)DIAL the phone at the end of a call! Nice trick if you could control it... )
Ended up buying a Seidio Innocase, which others have reviewed: it does indeed "fit like a glove" - wonderful precision, a nice feel, & leaves plenty of room around the actual Touch portion of the screen. (Carried the Fuze for several days in just the Seidio, but did not like the Exposed Screen.)
The combo of the Capdase BiFold Leather + the TOP HALF of the Innnocase seems to work perfectly: the edges are protected, the screen is protected, the Capdase fits nice & tight against the Seidio (which also provides a bit more protection for the top corners of the Fuze), and there has been no more Accidental Dialing (or Disconnects!).
Combination is obviously Not Cheap (think total came to around $55, incl Shipping Costs), but it IS flexible: can always remove Fuze from the Capdase & snap the Innocase back cover on if a SLIM profile is required.
The Combination fits nicely into an inner jacket / coat pocket (where a tri-fold wallet might fit), and also does well in the top pocket of an Over Shirt (Safari, jean, or wool - as long as pocket has a Closure of some kind!)
A few pictures are attached (hopefully...)
Can never pay too much for protection on our phones. Looking good!
might as well put the phone back in the box it came with and seal it tight so it'll never be scratched. jk
might as well put the phone back in the box it came with and seal it tight so it'll never be scratched
Indeed, the "naked" approach has some arguments in its favor - particularly if ALL you are carrying is just "a phone."
A Phone is relatively inexpensive & readily replaceable: My Razr never saw the inside of a case - but it certainly looked Well Used by the time it was replaced with the Fuze. (At only 16 months or so of usage.)
My Axim (PDA) has never been WITHOUT a case: it has served for over three times as long as the Razr did (and is now approaching 5 years in service), and only in past 6-months or so has it exhibited any outward signs of wear ("chrome" plating on D-pad & "DELL" logo are wearing off). OTOH, have been through numerous screen protectors, and the Daily Carry case (a RhinoSkin) looks like it has been through a war zone: in essence, the screen protectors and the case have 'sacrificed' themselves for the safety of the Axim - and the invaluable data stored within.
My Fuze is PDA FIRST, and Phone second. Like the Axim, I hope to keep the Fuze running for at least 4 years (hopefully longer!), and do not look upon it as Readily Disposable - like A Phone would be. Therefore a good case seems a very worthwhile investment, albeit one that is made more difficult by a) the dual purpose nature of the Fuze (it may be Phone Second, but it DOES still function as a phone), and b) the Sliding Keyboard.
For those who view the Fuze as simply a Fancy Phone - AND have the wherewithal to replace it every couple of years - a case is undoubtedly either a Nuisance or merely a Fashion Statement.
But for others, choosing a good case seems to be a reasonably important decision - otherwise there would not be nearly as many posts on the subject as there are...
well to each their own I guess, I generally change phones every 12 months or so. I guess I cant justify using a case to cover the phone
Kursell Case
This case is ok I own but I like my Kursell orbit Flex Case a lot better the flip leather lid Comes off thats so great plus I love the tight plastic over the keyboard the best case I ever seen
http://www.sfplanet.com/product/753...ex_with_Ratchet_Swivel_Clip_Black__Beige.html
This case is ok ... but I like my Kursell orbit Flex Case a lot better the flip leather lid Comes off thats so great plus I love the tight plastic over the keyboard....
There are several nice looking cases available - the Kursell is one & Pdair makes a couple, although recall looking at others as well - that utilize the Plastic Sheath Over The Keyboard approach. Looked long & hard at several of these, as (like the Kursell) some have a very elegant look!
Unfortunately could not get past the plastic sheath. This strays into "personal preference" territory, but
1) Dislike the "feel" of the plastic on top of the keyboard;
2) A plastic sheath seems to force the two layers of the Fuze apart. That should vary with the type of plastic used: if I hold the Fuze up to a bright background it APPEARS that the gap between the halves should be adequate for a precisely THIN sheet... Overall fit of the Lower part of the case might have an impact here as well, but that's hard to gauge without buying Every Case on the market...
3) Was concerned that the plastic would not WEAR well, given sufficient usage. Yellowing, becoming ratty at the edges, & stretching all seem likely.
Case selection is like PIM choice: Personal Preferences play a major role in product selection, and there are multiple Solutions that are equally viable according to the preference of the end user.
Slip case, or Attached case?
Belt Clip, or Not? (Detachable, or Not? Rotating or Fixed?...)
Leather, Metal, Silicone, Hard Rubber, Or ??
Removable Top Cover (Kursell) or Permanently Attached?
Holders for data cards, styli, Other Things?
Have LOVED the RhinoSkin that has served as the Daily Carry Case for my Axim. But it is an Industrial looking piece of hardware - rather clunky & now somewhat beat up in appearance. So also have a nice (Belkin) Leather case that I use for "need a suit jacket" events.
Frankly - along similar lines - can imagine times where I might forego the extra protection of the Capdase and simply carry the Fuze in the Innocase, as it certainly presents less bulk when in the Seidio...
Options are Nice, but trying TOO many gets expensive!
Looking to also purchase the seidio innocase, but before I do can ppl confirm if it gives problems on pushing on the screen. Have had such cases that seem okay for a few weeks, but then the screen becomes unresponsive due to the case pushing on the touch portion of the screen.
Thanks