Hey guys,
I've recently flashed the latest AMP (Wm 6.1) onto my G4 and i've noticed an annoying problem.
I don't know if it's the ROM or the fact that i've not used the device in a while, but it seems the slightest nudge on the screen will turn the device on and light up the backlight.
This is really annoying and will kill my battery quickly. Is there any app or registry tweak that can disable the slide mechanism from activating the power i.e. if the power is off, opening the slide will not power the device on - ONLY the power button will do this.
Any suggestions?
Well, that IS the way that the Wizard works! It shouldnt be turning on when you slide the screen if the device is in sleep mode...so I would say that it has something to do with the ROM. Try hard-reseting or flashing again my friend and see if it helps!
Yeah, but we are talking the slightest tap or millimeter and it turns on.
I'm going to try a reflash and hoping that it's not a hardware fault.
Im sorry, I said that wrong. The Wizard SHOULD NOT turn on when you open the keyboard, if you have powered it down with the power button or it has turned off automatically via time-out. It should only wake from sleep if you press the power button, sorry for the confusion!
Though it does indeed still seem like a ROM problem to me!
Related
Anyone know how to stop an accidental clicks or other screen presses from taking place when I've got the phone to my face during a call?
Si.
I use a freeware app called Screen Off, download it here:
http://www.handango.com/PlatformPro...latformId=2&N=96806&productId=125781&R=125781
Basically when I make a call or answer a call I have screen off assigned to a button, so I can then press the button to turn the screen off. To turn the screen back, just press the power on button.\
Hope this helps,
Or maybe you could simply turn PDA off with a single power button press...and when you're finished simply turn it on. Remember that the radio is always running (unless you hold the power button for 5s).
My screen turns off automatically after about 20 seconds when on a call - haven't set it to do this - in fact can't even find an option - it just seems to be the default setting. The only way to turn it back on is to press the green or red buttons, or just flick the volume control either way - works for me. (O2 XDA Mini s)
S.
Macrinus - thx that works a treat.
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
macrinus said:
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
Click to expand...
Click to collapse
Yeah, it is weird - bit annoying, but sensible really to save the power - Perhaps its just the device turning off then, with the phone still running .... comes back to life with a flick of the volume though - touching the screen won't re-activate it. Will have to time it a bit more closely !
S.
Radio on screen off
I too turn the device off when I'm on a call (although I only discovered I could without ending the call this morning). Otherwise, my ear activates the Start menu.
Doh!
if only the backlight is turned off, the screen WILL still react to face contact!
I understand that either the device (less the phone side!) via power button, or the screen must be turned off via an utility.
It may exist, but I know no proggie able to lock the touchscreen without turning it off!
(pitty, my axim X50v can lock the screen without turning it off via a Hw sliding button9
Hi all,
I upgraded to an O2 Exec a little over a week ago from a Blue Angel.
Initially I had a few concerns about it, but thankfully I found this forum, and have managed to get a number of enhancements, from increased storage and better radio (v1.09) to being able to turn on the flash light using a hardware button. My Exec is now running faster than my Blue Angel ever did, and hasn't frozen once. I've already become quite attached to it.
One thing that I think would be useful would be to have the unit turn on when the lid is opened, and off when it is closed. In the Power settings you can uncheck the box that turns off the device if it is not used for x mins, which has the effect that the screen will come on whenever the lid is opened. However, because the device is still running the battery still takes quite a hit even though the screen is turned off, and even when you lower the cpu speed.
Is it possible to turn the device on and off by opening and closing the lid?
Cheers
Rowan
Bump
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
jmdrizen said:
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
Click to expand...
Click to collapse
You're not really going into standby mode by closing the case, try switching on wifi or bluetooth and look at the flashing indicator LED, it will still be going whien the case is closed. Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
shuflie said:
Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
Click to expand...
Click to collapse
From what I know, the Universal has no real OFF mode, only standby, EVEN WHEN YOU PRESS THE POWER BUTTON. On mine, BT and WiFi still flashes even when I press the power button or just close the screen.
Pressing and holding the power button turns the backlight off, a quick press (or tap as I said before) makes it go to standby and should turn off everything but the phone part.
Okay well weve taken a really fun detour discussing the technicalities of standby and 'power off' but lets digress for a moment back to the original topic...
Rabangus, seems the best option you have is what you were doing. The hit to battery shouldnt be that large. I gave it a try not too long ago the way you and the other member had it set up again, and yes youll definitely have to charge it every night but it was doable. But I wasnt using wifi or bluetooth either. I am surprised that using Xscaler it still takes way to much battery. I assume thats what you are using to lower the CPU.
Oh well unfortuntely thats the way it is chief.
I've run into a frustrating situation that I can't get a hold of. For some reason my Wizard won't stay turned off. I'll hit the power button to put it in standby, and then all of a sudden, a minute or so later, I'll see the unit on, but with the backlight completely off. Pressing a button doesn't seem to trigger the backlight, but it I hit the power button the backlight will come on. The unit isn't locked either because with the backlight off, I can still use it. Can someone help me with this? Thanks
Check the notification q, and possible background software that is messing with it.
I checked the Notification Q and there's nothing. It just seems to turn on for no reason. I thought I saw someone that it might be batterystatus, but I can't remember. I guess I'll remove that from the plugin and see what happens.
There's a few threads about WM6, passwords, and backlight settings. If you use a password, try not using one. I previously ran WM6 and had the same issues, so I switched back to WM5. I'm now running WM6 again (Crossbow Reloaded 1.5), and this time I didn't bother to set a password - no power issues.
I think it's a problem with batterystatus, but I can't say for sure. I'm not using any passwords.
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
If you lock it, how do you want to wake up the device?
I wouldn't mind finding a way to do something similar. Maybe not lock the button entirely, but make it so that you have to press the power button for a long time (say 3 secs), or press the power button and the hang up button and the same time.
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
chris10230 said:
no offence but if you did this wouldnt it unlock when you pull out the stylus?
and also you can change that go to start => settings => system/personal => keylock (also not sure if keylock will be installed as i dont have one, but you should be able to find it on here)
Then you can change the wake up to be any of the buttons, current setup or none.
Click to expand...
Click to collapse
No, this wont do what is needed. The Keylock simply stops someone from using the phone. It won't stop the screen from coming on accidental in you pocket.
You can 'lock' the phone from accidental use by pressing and holding the 'hang up' button, but again this has nothing to do with screen activation.
It is true that pulling out the stylus will both switch on and unlock the phone though, so disabling the power button may not be all bad. I still think it would be better to activate the screen via a single long button press, or some such.
Totally agree with swinster's comment and proposal.
- Lock the phone by pressing + holding "hang up" button (already implemented)
- Keep phone locked and screen off until
either stylus is pulled out
or power button and hang-up button are pressed at the same time
But disable screen-on when power button alone is pressed (like it is now).
- Anybody able to implement this proposal?
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
This would be a great solution.
Mine switches on in my pocket all the time, they should have recessed the button, I thought about trying to remove it.
anorak22 said:
Meanwhile, how are you guys carring around your Topaz without the battery being emptied within a day (because of the described issue)?
Click to expand...
Click to collapse
Its a bit of an overkil, but my laptop come with me most places.
Reminds me of the Morecambe and Wise sketch (??) where the battery was the size of a suitcase.
I think I need a car charger - which brings me to another grumble - why didn't they implement a standard mini USB interface?
Standard mini usb fits and charges.
ALExander
alx37 said:
Standard mini usb fits and charges.
ALExander
Click to expand...
Click to collapse
Ooh, Ok. I thought they were different shapes. Will look into this.
[Edit - I have just read that it IS backward compatible with USB - the different shape is becasue the HTC connection supplies audio]
I'm guessing that any old Car Charger with mini USB will work then?
anorak22 said:
Is there any way to lock the power button on the TD2?
I would like to keep the device suspended, with the screen off, even when the power button is hit.
This is to avoid that the screen of the device gets accidentally switched on when I carry it in the pocket of my jeans. This happens all the time, leading to battery drain.
I have tried TouchLockPro, it locks everything except the power button.
Any way to set this up?
Any application providing this feature?
Click to expand...
Click to collapse
When you set EnableInputAtSuspend = 0, it will not unlock the power button at suspend. . It will then only awake via the Stylus. But I do not know if this setting also works on the Diamond2.
I am having some odd problems with mine if i press the power button to put it into standby. Sometimes when i press it it turns itself straight back on others it will come back on if i shake it (like the G Sensor is somehow linked to bringing it out of standby). Can you guys check this so i can confirm if i have a faulty unit please?
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
Thanks, sounds plausible, I'll call the supplier tomorrow.
I am sure that on my D810 I could set the lock on at zero seconds with no pin code. Then the keylock would come on every time I came out of standby but with no change of accidentally starting applications and making calls.
On my D2 the password is compulsory for keylock.
Any solution here? I don't want a pin code.
I power button fix would be even better to also save battery. The accidental turning on is a very annoying feature.
swinster said:
I think I read somewhere that someone had a similar problem - might be the stylus sensor thinking you have remove the stylus.
Click to expand...
Click to collapse
ye man,ive got this prob...the phone randomly unlocks bcoz the stylus sensor...im lookin for some application that turns the sensor off....havent found anythin yet...
This is still, by far, the most anoying "feature" of the TD2 phone. I can't believe that HTC did not have the forethought to think that people might actually put the phone in their pockets.
It should be a simple fix so that when the phone is off or in standby, the power button has to be press for say a second before the phone will come on, rather than just a single tap. They can do this to turn the phone off, so why not on?
After the Mango Update my Optimus 7 wakes up everytime i press the home button. This also happens in my pocket or phonesleeve because the button sticks out. So the screen is all day long on and drains battery like hell....
Is it possible by, for example, a register hack to disable this? so that my screen stays of and only be activated by the button on top.... and saves my battery?
I would like to know this also....
Anybody??
My phone never activated in my pocket because this button controlled by the light sensor
You're right.... 8-0
I never noticed this, because when I get the phone out of my pocket it is always on (I inadvertently press this button when getting it out of my pocket). As I understand now it is switching on at that moment... I want to switch off this button because of the spontaneous rebooting problem of the phone. This was introduced on my phone after updating to mango (7720). I must say, since updating to 8107 this has not reoccurred.
As long as this problem does not reoccur I don't really need to switch off the windows button as a 'on' switch.
Mine doesnt reboot on itself. But it eats battery as i wear it in my pocket all day.... and that sucks...
markkamphorst said:
Mine doesnt reboot on itself. But it eats battery as i wear it in my pocket all day.... and that sucks...
Click to expand...
Click to collapse
You may try to put your finger on the light sensor and try to press the home button .If this activate the phone is wrong .
Cool dude,.... didnt know that! it works as it should be. When i cover the sensor en press the home button the screen stays "of". I will try and find out if this helps when its in the phonepouch or pocket....
Maybe when i dissable the sensor in settings, that will help to...
Keep u posted
----------------------------
That doesn't work
----------------------------