Hey guys. I tried the diamond pack new release and I love the "diamond version" of the task manager that has the large buttons that are ACTUALLY usable with your fingers..
While I didn't want to keep the entire "diamond pack" cab loaded as it seem to slow down this INCREDIBLY laggy tc already.
I searched but can not seem to find if there is a cab for the task manager program alone???
does anyone have it???
thanks!!!
Related
i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??
how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...
yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly
bump ...
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot
mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap
The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.
u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...
i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.
bump? ...
bump ??
come on ppl, i am sure that someone has gotten touchflo to work
I HATE this task manager that comes with the ROM, but I can't find how to un-install it. I've looked for programs to uninstall hidden programs, but can only find one for today plugins. Any advice? Thanks in advance.
Not Likely
Correct me if I'm wrong...HTC TMv2 - I believe that Sprint built it into the ROM. Thus your only option is to disable it in the settings and use something else...I like quickmenu myself.
Thanks, I didn't try that yet. When I installed SPB Pocket Plus with the task manager on, the touch screen wouldn't work! It's all good now
Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help
Gonna need a little more info than that, chief.
For instance:
Are you running WM5, or WM6?
Which release of M2D did you try to install?
Do you have HTC Home installed?
Did you RTFA?
...and lastly, try posting your problem in the thread for that application, not in a board three clicks away from it, where the guy that cooked it might never see your questions.
Fazi93 said:
Yesterday i downloaded a Manilla 2D in .cab file. I copied to my phone, install and i have on my screen "Tap here to launch TouchFLO", i take it but it dont work. Can anyone tell me wtf? Plz help
Click to expand...
Click to collapse
Dude which version of touchflo 2D did you download ? Downloading a single cab install for the Wizard is crazy. Download the 18 Release and make sure you install the Shared DLL's and the HTC Patch for older devices BEFORE installing the manilla cab. The easier alternative is to backup your device and flash a Manilla 2D rom found in the Wizard Mobile 6 Forum
unable to launch touchflo 2d
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!
icopral said:
Hi guys, im using a HTC touch 3G running on windows mobile 6 if im not wrong. My touchflo juz stopped working and "tap here to launch touchflo" juz pops up. But even after i tapped it wont work. I have not installed any programs prior to this problem it juz struck me outta the blue. Any idea how can i resolve this? THANKS!
Click to expand...
Click to collapse
Are you ABSOLUTELY sure you didn't change M2D panel settings, turn on a new panel, or otherwise run a program like M2DC that would create registry entry changes? Did you accidentally enable something other than Manila in the Today settings? Also, check to see if you have enough free memory to actually run it. Lots of people miss the fact that you need to clear out temp files occasionally, and WM5/6 does a terrible job of it. Use ClearTemp if you appear to be running out of memory. Also, make sure that programs you open are actually getting closed. Filling up RAM with running programs (especially those that run on startup, like battery minders, lock programs, script programs, etc.) could also prevent M2D from running.
I have tried WkTask on WM 5.0 and I was pretty happy with it...
I have tried Magic Button in WM 6.5 and been not-that happy with it.
Later on I tried Duttys Task Manager on WM 6.5 (on my HTC HD2). The program is good but it still leaves programs open. For example, I close all programs with Duttys Task Manager and then I go to HTC HD2's Task Manager and I find ActiveSync running...
I am using the version posted on this Forum. Does anybody know that a better version of it has been released? Or, maybe there is a better Task Manager out there?
Thank you, all!
I've been using WkTASK since my HD days. And so far no problems with my HD2 either.
doesn't activesync start itself when it needs to? I use a hosted exchange service and active sync always seems to start and stay running after the first sync to Exchange.
WkTask is the best so far.
x2 taskmanager
FdcSoft Task Manager is amazing! (and free...)
x2 Taskmanager didn't work with my HTC HD2 (wm 6.5) maybe because I had an older version??
Where do I download WkTask and FdcSoft Task Manager from?
Thank you.
Dutty's Task Manager!!
The Best !!!
Well, did you get yours, novalistic? Maybe yours really closes all open programs...
Thank you in advance for the link!
Well, where did you get your Dutty's Task Manager, novalistic? Mayber your really closes all open programs...
Thank you in advance for the link!
Or perhaps somehow somebody can get the original X2 task manager working again..
Has anyone tried porting the HTC task manager and skinning it like the X2? Just an idea =D
sorry probably not the answer you are looking for
but i have found arkswitch to be very useful. i did not create this app i merely use it. here is a link http://www.freewarepocketpc.net/ppc-download-arkswitch.html