Related
Hi,
Please take a look at the attached screenshots. The volume bars for the system and phone sound seem to be compressed. I had this problem with the original ROM and also the upgraded AKU3.2 ROM which leads me to believe this is an application that is causing this to happen to the volume bars.
It happens in both portrait and landscape modes and a reset does not fix it.
Please compare these screenshots to your system to see if you have same problem then we can maybe do some app comparisons to see what is causing it..... unless there is another reason for it?
Thanks.
I seen what you mean. It's perfectly functional, except that the icons are slightly overwritten.
I do not have your problem, unfortunately, but it could maybe be because of the skinning program you use (to display the running programs). They tend to fiddle with the system dialogs.
The only other thing I can think of it maybe something that hacked/changed the system font/dpi settings
No problem on my Wizard. Have you changed your fonts? On my screen, the radio button for the on, vibrate, and vibrate, are not touching each other. There is a gap in between.
I am using magic button for the closing of programs but i have only started to use this recently. I havent changed any font sizes or any other display settings either. (I have tested changing them though but this didnt make any difference)
By itself, Magic Button shouldn't be the issue since I've been using Magic Button for almost a year and haven't seen the problem you're having.
Yes I know - with or without magicbutton i still get the same problem.
changing system font in the registry will cause the buttons and button text to be smaller and buttons look compressed.
Have you ever been alone in the dark with only your cherished Diamond wishing you had a better light source than its dark theme can provide? It certainly happened to me, and here is the solution: Flashlight.
Why a new such program when a few freeware already exist? Well, this one is TOTALLY finger friendly.
While in the main screen, drag your finger upwards to increase the light or downwards to decrease it.
The program can also be used as an emergency beacon, flashing two colors. To set the colors, again move your finger (horizontally this time) on the red, green or blue markers. The settings are saved on exit.
Compact Framework 3.5 needed!
Update 24/08/08 v 1.1
Added SOS function. This uses Color1 from Options.
Update 29/08/08 v 1.2:
Added menu item to disable Auto backlight. This allows to get maximum luminosity. The program will remeber the setting. When exiting, it will restore your backlight to what it was before.
To use this facility with the best results, do the following:
Start -> Settings -> System -> Power -> Backlight
Uncheck Auto adjust backlight
Slide both cursors to maximum
Check Auto adjust backight
Now start flashlight, go to Options, click on Auto backlight (to uncheck it) and your device shoud have maximum light. Don't worry, it will go back to Auto when you leave the program (or whatever setting you had before you ran it).
Looks very nice and convenient especially for users who don't have flash on their devices; downloading now.
I needed this thanks!
does your tool set the backlight to the maximum or just fill the screen with a color?
Haha, very nice/funny app. Ive never used a cellphone as a flashlight. But hey, im gonna install this one. I like it
ageye said:
does your tool set the backlight to the maximum or just fill the screen with a color?
Click to expand...
Click to collapse
Just fills the screen. Quite honestly, I don't know how to change the backlight, but if you have any pointers I'll try.
Really useful for me
Would it be possible to use vertical dragging to change the flashing speed ?
Timbermill said:
Really useful for me
Would it be possible to use vertical dragging to change the flashing speed ?
Click to expand...
Click to collapse
Interesting idea. I can do that...
You need to find a way to disable the light sensor and adjust to the max brightness for this to work efficiently.
why i can not have white light without flashing? if i disable flashing i get a grey light
flashing OK, i choose red and white
KukurikU said:
why i can not have white light without flashing? if i disable flashing i get a grey light
flashing OK, i choose red and white
Click to expand...
Click to collapse
Try to slide your finger upwards...
Can you make it flash SOS it could be usefull in an emergency...
I think it is 3 short 3 long 3 short flashes...
There is also another flashlight app. It called 'pLamp'. Version 1.5 is compatible with VGA. Google for it. It's freeware. Works great on my diamond.
aydc said:
You need to find a way to disable the light sensor and adjust to the max brightness for this to work efficiently.
Click to expand...
Click to collapse
I realize that. Changing the backlight is not API implemented though as it is hardware dependent. I've been googling it for a couple of hours already and no luck yet.
so use registry?
to disable the light sensor
HKCU\ControlPanel\Backlight\LightDetectOn
set it to 0->Sensor is off (will change immediatly)
this should make it ways brighter
don't know which key adjusts the brightness level but you may set Battery-Brightness-level to max and enable Lightsensor. So if you now disable it, you have max brightness
works well for me, jsut implement it in your app and i'll be very happy
Update to v 1.1: added SOS function. Download in first post.
kikakeule said:
so use registry?
to disable the light sensor
HKCU\ControlPanel\Backlight\LightDetectOn
set it to 0->Sensor is off (will change immediatly)
this should make it ways brighter
don't know which key adjusts the brightness level but you may set Battery-Brightness-level to max and enable Lightsensor. So if you now disable it, you have max brightness
works well for me, jsut implement it in your app and i'll be very happy
Click to expand...
Click to collapse
The problem with changing the registry is that it won't update the brightness until a soft reset, unless I'm mistaken.
yes yes yes turn backlight for max is more usefull then plenty of colours, btw 9 basic colours will be enough and still finger friendly... but still nice app
pedmond said:
Try to slide your finger upwards...
Click to expand...
Click to collapse
multzumesc! thank you..it's all in the finger...lol
pedmond said:
The problem with changing the registry is that it won't update the brightness until a soft reset, unless I'm mistaken.
Click to expand...
Click to collapse
just try it yourself
after changing the key the sensor will be deactivated immediatly
no soft reset needed
and with the workaround I posted early you will get max brightness very easyly
but even without the workaround this will increase brightness massivly as the main usability of a flashlight is to enlightend darkness and the sensor dimms the display to minimum in darkness^^
Hi All,
Xperia's hardware keyboard is very good, and the backlight is really of help when the ambient goes dark or even darker.
The HW keyboard is also quite cool in the daylight, the buttons' surface letters are very clear and crisp.
But here we have, an especial feature: needless automatic backlight, in spite of bright (or not so) day light? The letters become blurry not to say hardly visible. Not to mention this is wasting battery, too.
Is there a way to turn off the HW keyboard backlight, when it's not needed?
XDA gurus, help our batteries live longer and us users type faster! Please...
I hear you!
Yeah i've noticed the same problem, so ive started making a program to set the brightness etc, ive interrogated the registry for the backlight and have a small app working now whare all the brighness levels and timmings etc can be modified.
I was going to add a menu on the progam to changes the settings based on time of day / profile used on the phone, the rogram would need to be ran in the backgroud all the time but im sure it would not drain the battery much to do this as its a lightweight process that will wait for the profile to change.
I can put up what ive done, its very simple and you can suggest improvments / whatever.
Main functions would be:
allow user to change settings based on their currently selected sound profile (on, vibrate, off) and they have individual settings.
Allow the user to change all backlight related values (I have 11 of them editable in my program currently.
I would like this to have the keyboard light off during the day really as the keyboard light coming on makes it hard to see keys during the day.
awshanks said:
Yeah i've noticed the same problem, so ive started making a program to set the brightness etc, ive interrogated the registry for the backlight and have a small app working now whare all the brighness levels and timmings etc can be modified.
I was going to add a menu on the progam to changes the settings based on time of day / profile used on the phone, the rogram would need to be ran in the backgroud all the time but im sure it would not drain the battery much to do this as its a lightweight process that will wait for the profile to change.
I can put up what ive done, its very simple and you can suggest improvments / whatever.
Main functions would be:
allow user to change settings based on their currently selected sound profile (on, vibrate, off) and they have individual settings.
Allow the user to change all backlight related values (I have 11 of them editable in my program currently.
I would like this to have the keyboard light off during the day really as the keyboard light coming on makes it hard to see keys during the day.
Click to expand...
Click to collapse
Sounds promising! Can you post your app? I would like to try it out.
Here you go...
It just modifies timers and sensors on/off at the minute, but its a start. I made it to give better control over the backlight for myself, happy to help others!
Thanks Andrew! Longlive Ireland!
awshanks said:
It just modifies timers and sensors on/off at the minute, but its a start. I made it to give better control over the backlight for myself, happy to help others!
Click to expand...
Click to collapse
Thanks, bud!
So Features
What do you want it to do?
look better? YES , lol!
i was going to use tab screen to seperate out the info, there are some more values to add that can be changed, i need to group them together (eg ac and battery ones) and have a proper explanation on them (input value limit etc.)
So let me know what are the features you would like (in order of priority) and i will get cracking, lets see if we can make a good little app here.
By now I only wanted the app to turn off keyboard completely. Hope the author will succeed in that. Though I'm afraid the HW keyboard backlight settings are hardware related issue solely, nothing to do with registry/driver routine.
All the other settings are quite handy to play with the backlight of the device. Perhaps a bit more detailed instructions and explanations will be just fine.
Yet the 'About' and 'Copyright' options, maybe some easter eggs - without it the prog is a no-go
Have you tried adding the key HKCU\Software\SonyEricsson\Illumination\QWERTYBrightness ? I found this one when digging into the illumination application.
This will override the automatic brightness values for the keyboard, setting it to a fixed brightness when the light sensor turns it on.
I've set mine to 50, which works fine even if the light goes on at daylight.
Thanks bro, this is very useful hint!
I noticed also, that with '50' (it's not 'key' actually, but a 'value', I input this as a REG_SZ value), light sensor works with HW keyboard much better, more adequate - no backlight when in sunlight or electric lamps at home or in office, slightly dimmer backlight when in the dark. That must save battery life too!
on8a said:
Have you tried adding the key HKCU\Software\SonyEricsson\Illumination\QWERTYBrightness ? I found this one when digging into the illumination application.
This will override the automatic brightness values for the keyboard, setting it to a fixed brightness when the light sensor turns it on.
I've set mine to 50, which works fine even if the light goes on at daylight.
Click to expand...
Click to collapse
Odeon said:
Thanks bro, this is very useful hint!
I noticed also, that with '50' (it's not 'key' actually, but a 'value', I input this as a REG_SZ value), light sensor works with HW keyboard much better, more adequate - no backlight when in sunlight or electric lamps at home or in office, slightly dimmer backlight when in the dark. That must save battery life too!
Click to expand...
Click to collapse
That's may seems silly but i cant find "HKCU\Software\SonyEricsson\Illumination\QWERTYBrightness"
I found only patters and default....
Could please help?
you shall create this parameter if it isn't available.
Odeon said:
you shall create this parameter if it isn't available.
Click to expand...
Click to collapse
I did and it worked! thanks
But still, isnt there anyway to turn it off?
One minor niggle about the HD2 is that, while the auto backlight control is fairly good, instead of going from 10% to 100% depending on conditions, it won't go above 80% (I don't think) and certainly won't go below 30%, which is a bit too bright for artificial light, and much too bright for use in darkness.
So, as a quick work-around, I've added a start-menu short-cut to Windows\powerexe.exe - this lets me switch between auto and manual backlight fairly quickly. But it's still one more click than I think should be necessary: you launch powerexe, then have to click the "backlight" button. There must be a way of jumping straight into the backlight screen, because if you go manila settings/sound and display/backlight it jumps you straight there. Can I do that from a short-cut?
(bump)
Anyone?
I think the idea if flawed from the start, as a crucial aspect to battery life like backlight optimization cannot be so hard to adjust, and so "blind" as to limit the variation span between two values so far from the extremes.
In my experience the minimum is 40%, as putting my finger in front of the light sensor (which should be the one near the proximity sensor), I notice no decrease in light intensity when compared to manually setting value to 40%.
Also, the fact that we are forced to change the backlight in steps of 10% is simply silly. On my Ipaq I could fine-tune it as much as I needed, and actually my current manual setting of 20% is brighter than I'd like, but 10% is really too dark.
Also, what's the matter with the fact of being unable to completely set the light almost to off? If reading an ebook with white text on black background, a 5% value could be virtually enough.
Just found this during my crawling sessions: http://forum.xda-developers.com/showthread.php?t=450318
I was thinking of trying g-light, but haven't got round to it yet
http://www.ageye.de/index.php?s=glight/about
I've been using Lumos, Theemed has posted the link.
It's good and very configurable.
Apparently G-Light desn't work (well it does, but the interface is extremely slow, it will only respond to a click every 5 seconds or so, making it a nightmare to configure). Let's try Lumos.
While I appreciate all the alternative suggestions, I would still quite like an answer to my original question.
Well, it seems nobody has the answer to whether powerexe can be launched directly to the backlight page...
However in your first post you were complaining about how auto backlight was operating, and it turns out that Lumos does exactly what you'd want. You can set the min and max backlight level, and even tweak the light sensor reading vs BL level curve if you want to.
So isn't that even better?
Personally I was happy with the default auto backlight, but was also looking for a way to easily force it to full power for watching photos or videos. I was also launching powerexe with a shortcut to do it, hence my interest in the thread... Lumos lets you set "exceptions", so I simply set that Coreplayer, Resco photo viewer and HTC album force baclkight to 10. I don't even have to do anything anymore now, all automatic
@shasarak
I know how you feel That's how I felt when I needed to somehow obtain cut/copy/paste functions using the standard htc keyboard, and everyone insisted I chose another keyboard, and at last someone pointed me to the "text edit" function on startbutton-hold found in Quickmenu. Maybe inelegant workaround, but now I can do what I need without changing keyboard, a satisfying compromise.
So well, I discovered Lumos during the same session I noticed your thread, and now that I've been using it since last time, I can say it's definitely effective!
my969 said:
I've been using Lumos, Theemed has posted the link.
It's good and very configurable.
Click to expand...
Click to collapse
My experience with Lumos was it will cause problem to the G-Sensor. Try play Teeter or Resco Bubble, in Resco Bubble the G-Sensor will stop response every few seconds. Anyone having the same error? Haven't try this on the 1.66 ROM though.
Teeter works fine here, on 1.66.
kilrah said:
Teeter works fine here, on 1.66.
Click to expand...
Click to collapse
Hi kilrah, can you try out Caver ageye.de/index.php?s=download, I tested on 1.66 ROM problem persist. Teeter playable, but not very responsive to the action. Many Thanks.
Yep, confirmed that caver will lock about 500ms at every sensor read from Lumos. I've reported it in the Lumos thread.
OK, seems a solution is to add the programs that cause trouble as exceptions in Lumos, as it then stops reading the light sensor. Works fine indeed.
Has anyone tried this? http://forum.xda-developers.com/showthread.php?t=582059
kilrah said:
Yep, confirmed that caver will lock about 500ms at every sensor read from Lumos. I've reported it in the Lumos thread.
Click to expand...
Click to collapse
I have the same problem also with g-invaders.
Sometimes tho, g-invaders hiccups at the beginning and after some time it works smooth
No problem with teeter as well, even if it seemed for a while that the gsensor woud lean towards the left side. Recalibrated and apparently no more problems.
Shasarak said:
Has anyone tried this?
Click to expand...
Click to collapse
That's one of the first I found, but then I went straight to Lumos as it was so completely better
Shasarak said:
One minor niggle about the HD2 is that, while the auto backlight control is fairly good, instead of going from 10% to 100% depending on conditions, it won't go above 80% (I don't think) and certainly won't go below 30%, which is a bit too bright for artificial light, and much too bright for use in darkness.
So, as a quick work-around, I've added a start-menu short-cut to Windows\powerexe.exe - this lets me switch between auto and manual backlight fairly quickly. But it's still one more click than I think should be necessary: you launch powerexe, then have to click the "backlight" button. There must be a way of jumping straight into the backlight screen, because if you go manila settings/sound and display/backlight it jumps you straight there. Can I do that from a short-cut?
Click to expand...
Click to collapse
Its simple: make shortcut on ["\Windows\powerexe.exe" 2]
karelia-molot said:
Its simple: make shortcut on ["\Windows\powerexe.exe" 2]
Click to expand...
Click to collapse
Hooray!!! Finally someone actually answers my question! Thanks!
I generally have my backlight set pretty low for indoor purposes (20-30%) hopefully this conserves precious battery life.
However I find it mightily annoying when I'm on the move somewhere brighter than indoors eg. outdoors, and I have to check my phone and cannot see a thing because the backlight is set to "indoor settings" leaving me to navigate to settings> sound and display> backlight etc. This isn't usually a problem but when you can barely see the screen it is difficult.
Does anyone agree (hopefully a bright developer will) that it would great to have a backlight toggle on a quicklink within sense? I think a toggle between the setting you have manually selected and automatic adjustment of the backlight would be a handy application.
Any ideas? Does this already exist?
Nobody interested in this mod? Could save some battery
try myLight of mylostblog. google it. it's a very finger-friendly app that adjusts the backlight whenever you like but you have to set the auto-adjust backlight to off.
I have installed and it works well thanks for the link.
I would still like to see a toggle option between automatic and a preset value.
I would also like a toggle button or buttons for different settings (30%, 60%, 100% or customisable). Another idea would be for the auto backlight to work better. I had a Diamond and it was problematic with that. Not bad for most of the time in UK but if the sun comes out it's almost impossible to see what is on the screen. I might look at a mortscript solution using the reg key for now if I get a chance.
Yea I reckon that would be great. I think the HTC desire has this sort of toggle option in a status bar. To take the idea even further, it would be nice to see this sort of bar added to Cookies Home tab, similar to the new notifications bar added to v1.7.
Possibly: Wifi, backlight, bluetooth, 3g/2g connection all in one bar.
Im trialling MyLight now and it works well, it is finger friend and can be added to a quicklink for easy access, but looks a little dated perhaps.