A program to toggle backlight to stay on and prevent standby? - Mogul, XV6800 General

Searched till my eyes bled, can't find anything on this.
Say I'm using skyfire to stream video. I'd like the backlight to stay on, and the phone to not enter standby.
I'd like to toggle this by launching a program - and thus allow me to toggle it using a hardbutton with AEbutton etc. So when I'm done, I can return to normal power settings.
I can't seem to find a program that allows this... Any suggestions? Thanks!

http://forum.xda-developers.com/showthread.php?t=326103
you map a button to toggle the backlight then you press the power button to turn the display back on i use it all the time

Related

Stopping accidental clicks/presses from face when on phone?

Anyone know how to stop an accidental clicks or other screen presses from taking place when I've got the phone to my face during a call?
Si.
I use a freeware app called Screen Off, download it here:
http://www.handango.com/PlatformPro...latformId=2&N=96806&productId=125781&R=125781
Basically when I make a call or answer a call I have screen off assigned to a button, so I can then press the button to turn the screen off. To turn the screen back, just press the power on button.\
Hope this helps,
Or maybe you could simply turn PDA off with a single power button press...and when you're finished simply turn it on. Remember that the radio is always running (unless you hold the power button for 5s).
My screen turns off automatically after about 20 seconds when on a call - haven't set it to do this - in fact can't even find an option - it just seems to be the default setting. The only way to turn it back on is to press the green or red buttons, or just flick the volume control either way - works for me. (O2 XDA Mini s)
S.
Macrinus - thx that works a treat.
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
macrinus said:
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
Click to expand...
Click to collapse
Yeah, it is weird - bit annoying, but sensible really to save the power - Perhaps its just the device turning off then, with the phone still running .... comes back to life with a flick of the volume though - touching the screen won't re-activate it. Will have to time it a bit more closely !
S.
Radio on screen off
I too turn the device off when I'm on a call (although I only discovered I could without ending the call this morning). Otherwise, my ear activates the Start menu.
Doh!
if only the backlight is turned off, the screen WILL still react to face contact!
I understand that either the device (less the phone side!) via power button, or the screen must be turned off via an utility.
It may exist, but I know no proggie able to lock the touchscreen without turning it off!
(pitty, my axim X50v can lock the screen without turning it off via a Hw sliding button9

Mystery action when HD is off

My practice is to turn off my HD after use (I use 3rd party app to turn off the machine instead of pressing the power button), and put it back to the pocket. Recently, I found that my HD have do something when it is off, such as,
- make a phone call
- Go the the TF3D Photo tab and viewing a photo
- Showing the Power setting page (I set it to the LSK)
I'm 100% sure that the machine is off, so I wonder if my machine got a problem?
are you REALLY 100% sure it is OFF and not only in standby (aka screen off)? there is a old version of a 3rd party app that when you tap the poweroff icon goes standby and NOT poweroff. you should disable the 3rd party app and shut down your device using the default power button.
instead if you like having it only in standby you should keep in mind that standby does NOT by any means autolocks the screen. I'll try to explain:
you put the machine in standby and put it back in the pocket. you receive, dunno, a ring or a sms or something else. automatically the screen turns itself on, activating the touchscreen, and then all hell breaks loose
there are some solutions to this: a long press of the end key enables the default lock feature of the device. then you can turn off the screen safely (or almost safely)
also you might want to install s2u2 and set it to autolock on screen off. you turn off the screen (either with your app or the power button) and when resuming you have a neat "slide to unlock" screen (iphone-like). This is the solution i suggest more.
I am quite sure i talked too much but i hope i've been useful anyway

Is Wake on Home Button Push Possible?

Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
I would say not. There appears to be no power to these lower buttons while in standby, so no software could work?
Kev
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button?!
Click to expand...
Click to collapse
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Im also afraid for that power button... used it a lot on my diamond so it got bricked, its so gentle... Im using it as much as little possible now on mine HD for that reason.
I have s2u2 unlock on stylus out, so I pull out the stylus, the HD comes on and unlocks. It's so simple.
gadgetuk437 said:
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Click to expand...
Click to collapse
gadgetuk437
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Click to expand...
Click to collapse
That's not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
gadgetwizard said:
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
Click to expand...
Click to collapse
That is correct.
Power consumption, in this case, depends on what applications are left running. GPS, streaming video, etc would be a bad idea to leave running. But more workday apps use very little juice when the huge power drain of the screen is turned off.
MackTK said:
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
Click to expand...
Click to collapse
Nope... I've tried that app. Its great for locking down the normal WM hardware buttons, but it doesn't have the HTC bespoke "Home button" on the list of configurable buttons.

Screen Not Dimming With Auto Shut Off Disabled?

Please bear with me as this may be a dumb newbie question. I searched every post on the Imagio section here and at PPC and was unable to find an answer.
Got the Imagio for my wife and she's loving it (we had Storms previously- bad, bad mojo). She uses Groovefish to stream music and the stock dimmer setting will shut down the player after the time limit is reached. No problem, right? Changed the setting to stop this (never auto shut down on battery power).
Now, the screen will dim somewhat when left idle, but never shuts down all the way. It's dim but still active. She's been having to change the setting every time in order to not kill the battery.
Should the screen power down all the way while leaving the device active (like hitting the "shut off screen option" after holding the end button)? If not, is there a way to do this?
Thanks for any insight you may be able to provide. I've done nothing but Blackberries for years and this is my first real foray into WinMo.
Try to check the power settings. Go to the Settings Tab and push All settings at the bottom. From there go to System > Power > then click the Advanced tab. That should have settings to turn off the screen after 1 min or 30 seconds.
Thanks for the quick reply. I probably should have been a bit more clear.
It is in that menu that I have been manipulating the settings. There are two options for battery power. There is one to "turn off backlight" after x amount of time, the other is to "turn off device". With backlight set to 30 (or whatever) and device disabled, the screen never completely goes off.
It functions properly with "turn device off" enabled, but interrupts Groovefish when playing. This does not interfere with the native TF3D media player. While its not the end of the world if she ends up having to change that setting to use the program, it would be nice to be able to disable the screen with a partial shutdown (and extra battery drain when using that application).
Cheers!
Thats interesting, seems like its the program thats doing that. I have Opera, FM radio, email client, etc. running all day without it crashing. I have seen this before with Internet Explorer where i would leave it running connected to a website. then when i check back IE is gone and i have to start it again. By any chances is this a website or an installable app that you are using?
Groovefish is a streaming music client that is installed on the device
BTW, it is incredibly cool if you don't have it yet. Stream just about any song you want for free (legally).
http://forum.ppcgeeks.com/showthread.php?t=88505
I use g-trigger to shake my phone to turn off the display works great! Just disable the shake to turn it back on.
I'll give it a shot and see if the application stays running. Many thanks!
Actually I think backlight off is happening when it "dims". You need the screen to go off, not just the backlight. Try using xdaShutdown to go into Lightsout mode and see if that works for you. The program can be found here:
http://forum.xda-developers.com/showthread.php?t=544016
Skins in the same thread as well.

app to turn on an off device

would there be an application that will turn on the device when it's OFF. Reason behind this is that my power button wasn't working anymore so I need an app to turn on my phone. Apparently, my alternate route is using AE button plus for turning off, and to turn on my phone is that I have to take out the stylus, but I noticed that it used to consume battery usage...if I take it out on the second time it will eat up 2% of the battery usage...and I had even tried using the switch display off/on with the AE button plus but it will make my usage with my phone for upto 8 complete hours only....before I can even use my phone upto 12-14 hours...
if not an application, maybe remapping or registry hack will help..
please I need some help..
thanks in advance
anyone who could share or help.....thanks
What type is ur pda? Do u mean turn on from COMPLETELY turn off?
Go to Start,Settings,System,Key Lock and set it to "Do not lock buttons".
This way, any button press on any button will wake the device. You might want to lock it before switching off so you don't dial people by mistake.
iam using HTC diamond and currently have the SUN 6.1 with 2.5 manila version, but it seems that the keylock doesn't work properly on that ROM
thanks for all your help, just asking some other options here

Categories

Resources