As it said on the new guys guide
"STEP MANUALLY to bootloader. (Press and hold camera button and press reset)"
I tried to do that after I installed succesfully the hard-SPL
but my cruise do not show me the 3color screen
actually I'm not sure I'm pressing the correct buttons:
the camera button on the right side of the cruise, and the reset button on the top
is it correct?
someone, help?
On the top is not reset button, but On/off, reset U must press with pen in hole next to miniUSB...
Keep pressed photocamera button while releasing the pen.
Related
does someone know how to do it?
Hold the photo button and then soft-reset. Keep holding for about 7 seconds, then release. That worked for me.
While your device is on, try holding the Camera button and pressing the reset until you see the screen with big red, green & blue color bands
thanks but it doesnt work...
If you want to enter in Bootloader mode you have to press and hold the Camera button, and in the same time you need to press the Power Button once.
1- Turn it off
2- Press and hold "camera" button
3- While still holding the camera button , connect the usb cable and keep the camera button pressed, then you'll get the Bootloader mode.
It's my first time hard-resetting my wizard (random resets are finally getting to me), but I was wondering how on earth am I supposed to do this. I follow all the procedure, and all that appears is a screen filled with the colors red green and blue. I hold for about a minute more after that screen shows up and nothing more appears. I know i'm supposed to see some dialog box that asks if I want to clear it, but I'm just not seeing it.
Hi - this is the way i do it.
Turn device off.
Hold comm button (top left) and record button (top right) together.
Turn device on - keep fingers on two buttons above.
Black screen should come up with some writing (take fingers off buttons above) - press call button (green)
and it will hard reset.
This may work. But that is NOT what the manual says to do. It says to hold the top side left and top side right buttons and use the stylus to push in the reset button on the right side. But I did this and it did nothing.
HTC Wizard, i-mate K-JAM, Cingular 8125:
While holding the Comm manager button and the Voice Command button, push in on the soft reset button (reset hole) once. Keep holding the Comm Manager and Voice Command buttons until there is a screen asking you if you want to clear all data. To commit, press the green send key.
Note: The Cingular 8125 also has a software hard reset option. You can find this application in the Settings folder under "Clear Storage."
http://pocketpccentral.net/help/cingular/8125reset.htm
I've tried the hardware button method several times (camera button, comm button, and turn on) and I even tried the other method (which did nothing) but when I perform the comm and camera method, all I get is a multi-colored screen that has two strings of numbers on it. So the next question I got to ask is, is a clear storage for the 8125 as effective as the hardware reset?
Some people think it is, some don't - I think it's pretty close give it a shot
Just navigate to clear storage its easier.
Start > Settings > "System" tab > clear storage
It will ask if you really want to, tap yes then it should hard reset.
This is how I hard reset to UPGRADE or RELOAD the ROM from my PC:
I keep the device on... I hold the top left (comm mgr button) and top right (voice command button) then I press the reset button on the right side with my stylus. ONce the device goes to black screen, I release the top left button while still holding the right... wait 3 seconds then release the top right button. At this point you should be to a DOS like screen with a USB label in the lower left. You can then load the ROM from your PC to the device.
We dropped one of our wing's and now the ONLY thing not working is the power button at the top. I had psshutxp so I mapped "Display Switch" program to my camera button and I am using camera button to turn off the screen.
The problem I have now is when I took the battery out to change the SIM card - I don't have any way to start the phone.
I can hold the camera button and plug into my computer usb and get to the color screen where it shows the SPL and IPL numbers, is there any program or way to reboot the phone from command line, so that it can boot up?.
Please help.
Thanks.
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
fzzyrn said:
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
Click to expand...
Click to collapse
If I don't hold the camera button, the phone won't start.
First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!
hi
I have HTC ELF0100 need to add a french language ... but can't enter in bootloader mode to know the IPL and SPL ...and can't Reset too
i try this ways but not work
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
heeeeeeeeeeeeeeeeeeeeepl please
No body can help me ????
Hi,
Did you try :
"[UPG]All-in-one tool to find your Device ID/CID/IPL/SPL/IMEI/Serial etc." -> http://forum.xda-developers.com/showthread.php?t=418892
Charles
is it china made and writen in china i think is not exactly elf0100 it is good china copy i have same pb it have poor lcd quality