Hi there.
I have optical joystick switched off all the time, but sometimes it turns on by itself. I think some application does it, but so far I did not found which one.
Any idea ?
Got the same problem sometimes
and
my backlight dimming sets itself often back to 10 seconds (instead of 1 minute which I had set it to)
Anyone else has those problems ?
I can confirm optical joystick switching on.
R1A GENERIC UK ROM
Dr.Sid said:
Hi there.
I have optical joystick switched off all the time, but sometimes it turns on by itself. I think some application does it, but so far I did not found which one.
Any idea ?
Click to expand...
Click to collapse
I had the same problem as you, but it went away ever since I've got the new(R2) rom installed.
Don't know if it's some application that does it tho, because I've barely installed anything on my newly flashed phone.
optical joystick keeps turning on
Actually I have the same problem, the joystick keeps turning on by itself, even when turned off. My conclusion is that it turns on when switching to the Mediaxperience panel, using the panel and then switching to another panel.
I'm also looking for a solution for this.
even i had this problem... i tried changing the panels but it would still happen. i then set my joystick to lowest sensitivity in the settings. its been almost a month and it has not happened since.
i think its a issue of some dust or moisture settling below the joystick on the circuit board and causing it. try setting it to the lowest setting.
I'm fairly new with the xperia, have it one week now. Of course I try everything out, and it's just switching back on after switching to the original MediaXperience panel. Maybe Sony has programmed it to turn back on with this panel to benefit the optical joystick at it's maximum. Isn't there a registry edit possible to make it permanenty switched off?
anyone?...
I changed the following registry entry:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"AutoDeviceLockEnable"=dword:00000001
Now when I press the the power button of the blackstone the wm 6.5 slider will appear. So far it works fine. But when the phone is not used for a while the backlight is getting darker. When I unlock the blackstone with the slider, the backlight is not getting brighter, it remains darker (but still not turned off).
Does anybody know this behaviour? Any solutions?
Thanks
Andy
This is a known problem..Try to use auto csdevctrl for auto wm 6.5 locking..
wm6.5 lock is nice and functionally but it is slow and buggy. Don't know if it's final version will improve but I suggest you to use third-party solutions.
gbjack said:
wm6.5 lock is nice and functionally but it is slow and buggy. Don't know if it's final version will improve but I suggest you to use third-party solutions.
Click to expand...
Click to collapse
Ever tried EnergyROM HD 'Phoenix' (21731)
faster than any other 6.1 ROM I have tried.
Anyways - why do we need another program to do what WM6.5 should do on ist own?
peterkling said:
Anyways - why do we need another program to do what WM6.5 should do on ist own?
Click to expand...
Click to collapse
Because WM6.5 isn't officially released on the Blackstone
the reason is...I am cooking my own 6.5 rom and I just won't get it working.
on the new miri V18 the backlight work perfectly
voileuxcool said:
on the new miri V18 the backlight work perfectly
Click to expand...
Click to collapse
no,it's not.
sorry it don't work after unlock but it work when touch the screen ! And on previous versions the wake up on touch don't worked
When I am using the following settings, the lock is not activated anymore when the backlight is dims...but when I tab on the screen, the backlight does not turn on anymore. So with those settings I went one step ahead, but I still not reached my goal. Has someone an idea? How can I force the backlight to turn on again?
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"BatteryTimeout"=dword:0000003C
"LightDetectOn"=dword:00000001
"Brightness"=dword:00000005
"ACBrightness"=dword:00000005
"ExtOnOff"=dword:00000001
"LightSensorToScreenOff"=dword:00000005
"LightSensorPollingEnable"=dword:00000000
"AutoDeviceLockTimeout"=dword:0000012C
"AutoBklOffset"=dword:00000000
"LedOnOffAdcValue"=dword:0000013F
"AutoDeviceLockEnable"=dword:00000001
"DimBKLinUnlockScreen"=dword:00000000
"ACBacklightOnTap"=dword:00000001
"BacklightOnTap"=dword:00000001
"OnOff"=dword:00000001
"LightSensorThreshold"=dword:00000005
"LightSensorInterval"=dword:0000012C
"LightSensorTimeout"=dword:0000001E
"AutoSensor"=dword:00000001
"QKeyLedTimeout"=dword:0000000A
"BatteryTimeoutUnchecked"=dword:00000000
"BatteryTimeoutTemp"=dword:00000000
"ACTimeoutUnchecked"=dword:00000000
"ACTimeoutTemp"=dword:00000000
"ACTimeout"=dword:0000003C
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:00000000
Hi mates,
If you want to use the AutoLock of WM6.5 without backlight issue, you need to do as follow:
1. Change Auto Backlight to Manual
2. Disable "Turn Off Backlight" in Power Setting
Now, the AutoLock will work only when you do poweroff.
Cheers,
thanks...but I know... I need the registry settings...cause I want to cook it into my rom.
backlight issues here too
I am having the exact same problem. I have the 6.5 5nergy ROM. I have to manually go to backlight and touch the screen. Even though the bar on the backlight program is up to the top, it's still dim.
This has made me avoid using my Fuze and stick with my N85 - which has a much better camera anyway. But that full QWERTY keyboard... I miss it so!
Does anybody want the fix for this, or is this old news?
ANDYx1975 said:
the reason is...I am cooking my own 6.5 rom and I just won't get it working.
Click to expand...
Click to collapse
It is a known problems, have problem across three devise HD2, HD & SX1.
My 2 cent obser, slock mess up, device lock work good for me across three device, so far as I know only energy rom cook in and no issue. hope it help.
Cheers
The issue from what I have been able to determine, is that once your device Auto Locks, the BackLightOnTap stops working. Once it happens, it is not possible to get the backlight back on until you turn the screen off and back on again (if Auto adjust backlight is turned off this may not even work). One way to get around it is to never dim the backlight.
Anyway, I extracted the BackLight.dll from the leaked WM 6.5 ROM for the Diamond (Pine) and it corrects the issue on my Raphael. HTC seems to have fixed the issue, but there is one caveat.
With the new driver, the screen dims when ever the device is locked. The backlight will turn back on once it is unlocked. What this means is that if you are outdoors and your device is locked, it will be difficult to see the slider in order to unlock it.
This is the only issue I have encountered so far.
Update: Doh, what an easy fix. The value that controls the backlight level while the screen is locked is here...
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:0
By default, this is set to 0. Values 0 through 10 are valid (0 = lowest, 10 = highest).
Update 2: Bah! One of the drivers sets the LockLevel back to 0 on boot, which is a good thing because if you set the LockLevel to anything but 0 and use AutoLock, BackLight.dll crashes (probably why HTC forces it back to 0 on boot).
Also, a note for Raphael users, since this dll is from a Diamond, you will loose the keyboard backlight.
TrueG
trueg said:
The issue from what I have been able to determine, is that once your device Auto Locks, the BackLightOnTap stops working. Once it happens, it is not possible to get the backlight back on until you turn the screen off and back on again (if Auto adjust backlight is turned off this may not even work). One way to get around it is to never dim the backlight.
Anyway, I extracted the BackLight.dll from the leaked WM 6.5 ROM for the Diamond (Pine) and it corrects the issue on my Raphael. HTC seems to have fixed the issue, but there is one caveat.
With the new driver, the screen dims when ever the device is locked. The backlight will turn back on once it is unlocked. What this means is that if you are outdoors and your device is locked, it will be difficult to see the slider in order to unlock it.
This is the only issue I have encountered so far.
Update: Doh, what an easy fix. The value that controls the backlight level while the screen is locked is here...
Code:
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:0
By default, this is set to 0. Values 0 through 10 are valid (0 = lowest, 10 = highest).
Update 2: Bah! One of the drivers sets the LockLevel back to 0 on boot, which is a good thing because if you set the LockLevel to anything but 0 and use AutoLock, BackLight.dll crashes (probably why HTC forces it back to 0 on boot).
Also, a note for Raphael users, since this dll is from a Diamond, you will loose the keyboard backlight.
TrueG
Click to expand...
Click to collapse
so ,does it working on HD?
I can't say as I have a Raphael, but it should.
Also, I have found that if you lock the screen using a password [\Control Panel\Lock] there is no problem with the backlight. The crappy part being you have to enter a password from then on, but it's one way.
Any solution yet?
ANDYx1975 said:
I changed the following registry entry:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"AutoDeviceLockEnable"=dword:00000001
Now when I press the the power button of the blackstone the wm 6.5 slider will appear. So far it works fine. But when the phone is not used for a while the backlight is getting darker. When I unlock the blackstone with the slider, the backlight is not getting brighter, it remains darker (but still not turned off).
Does anybody know this behaviour? Any solutions?
Thanks
Andy
Click to expand...
Click to collapse
Does anyone have a solution for this problem yet?
You can try the CAB I posted. The only quirk is that the screen DIMs when the device is locked (which seems to be the same behaviour as the Omnia). The backlight turns back one once unlocked. This appears to be HTCs answer to the problem.
hi all
please i need some help with the tomtom on device
it seems not to recieving any satelite signal, when i go into the GPS STATUS screen the bars are all greyed out and none are moving. the yellow and black ball is moving the the top right corner..i have tried both soft and hard resets with the device and still no signal
any ideas anyone?
thanks in advance
Carl
Hello, I have problem with my LG G2 (D802) gps. I think I tried everything possible and impossible but still the same problem(20+ gps.config configurations, cpu governors, cyanogen versions, stock versions, doriman kernel ....). When i use some kind of "GPS test" applications then I get GPS fix and it work great(even 1 hour). But when I switch in this application to radar view, where are satellites visible on compass as colored points (each color represent signal strength), then after 1-2 seconds are getting signals weaker and weaker until it lost all satellite signals. I switch to main view with satellites bars and signals after few seconds raise back to normal quality. It is not problem of application, because I try the same on my old HTC EVO 3D and on radar view is signal still the same. Then I switch, for example, to google maps and i have gps fix, but again after few seconds fix is lost.
Next strange behaviour is, that if I set navigation to some place and I lock screen (power off the screen), then it seems, that gps has stable fix and navigation is correctly navigating from beginning to end of route. But after screen unlock gps lost fix after few seconds.
It looks like some gps thread problem, or cpu power saver problem.
Could somebody help? Have somebody the same problem?