Related
Anyone tried getting imode to work on the xda?
I have been able to connect to the GPRS network of my imode provider and i get this config:
IP: 172.23.80.111
Netmask: 255.255.0.O
Gateway: 172.23.0.1
DNS: -
I did a pingsweep on the network 10.10.100.0/24 and i got these addresses replying:
10.10.100.10
10.10.100.13
But i'm still not able to connect to the internet, i need a proxy and a dns address.
Anyone knows anything about this?
I have BASE (belgium) as provider (part of KPN)
thx
These settings will enable you to use IMODE on your xda for BASE.
APN: portalmmm.nl or [blank]
Username: [blank]
Password: [blank]
Proxy: none
DHCP: yes
DNS: automatic
Then fire up Ezos Ez-WAP and configure a this as gateway
ip: 10.10.100.10
port: 9201
this is a connection oriented WAP gateway
now surf to http://menu/gprs/mn/main.aspx for the imode menu
We found an http proxy running on 10.10.100.10 5080. So when you connect with the settings above, en set this proxy server, you should be able to surf normal website (== NON imode stuff)
Also, it's possible to setup an http tunnel where you can tunnel you traffic trough, so you 'll have a full internet connection
Imode on XDA II
Hi,
Just got my first XDA today,
a T-Mobile MDA,
Released the SIM-lock trough the new "soft-version method" on this site (perfect, thx again!),
Put my KPN I-mode SIM in the MDA,
Am lost now on how to get I-mode going and would love to accomplish full internet functionality
Found another thread here;
http://forum.xda-developers.com/viewtopic.php?t=5997&highlight=imode
wich says it's not possible on the XDA II wich I think is BS, if it works on the XDA I, why not on the XDA II??!!
Need help and am yet very unexperienced with the use of pocket-pc...
thx for replies!
i-mode on qtek 2020
I have i-mode access on my qtek 2020.
I set up the gprs connection and proxy (port 5080) like for xda.
PIE does not show all i-mode pages (user agent i think).
I tried EZ wap 2.5 and this one show the start menu http://gprs/....
imode - netfront
Imode works fine for me on a german T-mobile MDAII.
also imode mail, but you need to use netfron 3.0 or 3.1 for this and change the user agent.
normal http works fine also, bt no MSN messenger (but you can use
emessenger).
I use a Base pre-paid card.
It aloso works in Holland and Germany with the same Sim card and
only 7 euros / month
Imode Base / netfront / Tunneling
Hi all,
A few months ago, I could manage to surf with Imode on my XDA2.
1 Netfront 3.0 ok too but Netfront 3.1 does not work on XDA2 for GPRS connexion, I even obtained a refund from them.
2 Can you give me more details on how to tunnel forfull access ? I have tried but not successfull. I would like to be able to gain POP3 access.
Thanks,
Stéphane
hi, i read here about the email settings.
Can anybody give me a hint how to set up my s100 for receiving normal pop mail?
- what are the settings? (I tried my outlook setting but don't work)
- what is outgoign server available?
For imode mail? What are the settings ?
Thanks so much
hoe met ik mijn qtek 2020 dan instellen ?
kan je deze noob aub stop voor stap uitleggen dank bij voorbaat
how do i have to do this ?
please guide me step after step
thanx
what is iMode ??
I can not get imode worked use my XDA on o2.
Hi
ON my nokia I had wap access to check headlines and football scores. How do I enable the same facility on an XDA ?
You need to run a seperate WAP browser, like EZ WAP. Search the boards here for EZ WAP and you'll find links to places to get it. Once you have it, there's a great WAP config description for T-Mo at:
http://forum.xda-developers.com/viewtopic.php?t=3675
Hope this helps
I've tried following the steps given in several different threads for configuring this on my XDA but have been unsuccessful. I've been trying to use EZWap to configure it, but it cannot connect. I think its something to do with my network connections on my phone that just arent right. Can anyone walk me through setting up the actual network connection settings for WM2003? Any help would be greatly appreciated.
i installed the mms from the O2 uk rom... (from zip posted here somewhere)...
i get mm2 notifications, but i cant download them...
any ideas?
WAP using IE in WM2003
Supposedly IE in WM2003 has support for WAP browsing. However, when I set up a "TZONES" connection and set up the AP to ( wap.voicestream.com ) and the proxy to ( 216.155.165.50:9201 ), and I try to navigate to:
wap.myvoicestream.com
It no longer works. However, if I navigate to any "regular" www page, it comes up just fine. Has anyone else successfully been able to configure their WM2003 ( TMobile PPCPE ) to access their TZones via IE using the WAP connection/Proxy settings ?
I was thinking of installing EzWap 2.5 again, but during the install it said it was going to replace wapdrv.dll and I wasn't going to run the risk of overwriting a necessary file, so I exited the installation of ExWAP.
Anyone gotten this to work ???
[/b]
Eureka !!! You don't need EzWap or Klondike !!!
<Edited - It was LarryH from Horward Forums who originally helped me out with this...it was his idea to try out a different URL monicker. Thanks again Larry ! >
With LarryH's help, we've discovered that it IS possible to access T-Mobile's TZones pages once you've undergone the upgrade to WM2003 from T-Mobile's SITE.
After you set up your connection to use the WAP accesspoint:
wap.voicestream.com
Under Proxy Settings:
WAP: 216.155.165.50 port: 9201
SWAP: 216.155.165.50 port: 9203
You don't have to set the HTTP or SOCKS,
as TMobile doesn't support SOCKS, and the HTTP port ( 80 ) is already open on their gateway server.
To access your TZones homepage, just open IE, and enter:
wsp://wap.myvoicestream.com
apparently entering:
http://wap.myvoicestream.com
will confuse IE in WM2003 for PPC, and
it will say "Unable to find page".
Everyone, enjoy your TZones under WM2003.
Marcelo
but my MSN Messenger don't work
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
do i need to set up something else? or purchase other data plans from tmobile?
Re: but my MSN Messenger don't work
yfei said:
my MSN Messenger still don't work. I have set access point to wap.voicestream.com
I just tried that on my PPC PE and I was able to sign on to MSN Messenger. Are you sure you have the Connection you set up to access the proper proxy address and ports. Make sure you setup the user/password for your msn account properly, because if you type it in wrong, it won't let you log in.
Let me know if you run into any problems.
Marcelo
Click to expand...
Click to collapse
Awesome !!!
Now I can have MSN Messenger using T-Zones / WAP access. This is wonderful.
Now with just WAP, I have acesss to port 80 & 110 and MSM messenger.
Thanks a bunch!!!!
-JB
t-mobile UK ??
Does anyone know the WAP settings for t-mobile uk ?
OK my settings are:
cellular line GPRS
access point name: wap.voicestream.com
user name password and domain all blank
proxy settings this network connects to the net check
this network uses a proxy server to connect to the net checked
proxy server is 216.155.165.050
under the advanced part all but socks are set to same IP
WM2003
I connect to GPRS but it says page cannot be found
any ideas why?
figured it out and took out the proxy stuff and access the web now.
I would also like the uk settings and a fool proof step by step instruction, please.
Thanks for any guidance
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
choco_bunny said:
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
Click to expand...
Click to collapse
Is this what you have so far:
How do I configure my PC for my new mobile Internet access?
Prior to using GPRS service, you will need to configure your PC using the CD-ROM included with your handset or device. If your software is not already configured, you will be asked for your Access Point Name (APN). Enter internet.fido.ca when prompted. Then enter your user name (fido) and password (fido).
If not give it a try.
Ok some of this is new to me. I did not get a CD with my SX56. I got if off eBay and the seller didn't include as Siemens CD but he did give me a cd wit some files on it...I have no clue what they were so I left them alone...
So now I have to configure somethin on my Desktop PC b4 using GPRS on my mobile device? I'm very lost at this point. I do have those fido settins, altho I think wap.fido.ca is the propper APN.
Thanks for helpin out man. I'd love if somebody could clear this for me. Thanks in advance
iggy said:
choco_bunny said:
Hello, I'm havin a bit of trouble getting the GPRS settings on the SX56 working after updating to WM2003. Actually GPRS never really worked on it b4 but whatever... after searchin this forum i could not find any suggestions converning 2003. Is ther anybody usin WM2003 on Fido and that has GPRS conection working? I would appreciate some help on thsi if possible.
thanks in advance!
Click to expand...
Click to collapse
Is this what you have so far:
How do I configure my PC for my new mobile Internet access?
Prior to using GPRS service, you will need to configure your PC using the CD-ROM included with your handset or device. If your software is not already configured, you will be asked for your Access Point Name (APN). Enter internet.fido.ca when prompted. Then enter your user name (fido) and password (fido).
If not give it a try.
Click to expand...
Click to collapse
Well this is about all I could find, I hope this helps more.
My settings are
APN= wap.fido.ca or internet.fido.ca
Userid = fido
password = fido
IP is 205.151.11.11
or
http://www.howardforums.com/showthread.php?s=&threadid=100789
or
For Fido's WAP using GPRS:
APN: wap.fido.ca
username: fido
password: fido
IP: 205.151.011.011 (the last zero might disappear, but won't affect anything)
ok so since last night i have been able to "connect" to Fido.... but i still can't send emails or use IE or MSN messenger...what gives? I'm gettin error messages all the time on IE....ahhhhhh
thanks for help so far!
Fido WAP on Prepaid.
HTC Wizard, Qtek 9100, T-mobile MDA running WM5 and WM6 (both tested)
This is web only, no ssh, no messenger, no email outside of webmail.
Name for the location: Fido
Select a Modem: Cellularl Line ( GPRS)
APN wap.fido.ca
User name: fido
Password: fido
Domain: 205.151.11.11
Proxy Settings Tab
Check This netowrk connects to the Internet and This network uses a proxy server to connect to the Internet.
Proxy server:205.151.11.11
Hi I have just transfered my MDA compact to accept Vodafone sim card..I used this forum it is excellent. However I have tried using most of the previous post in respect to setting up GPRS and MMS settings ..all have so far failed.
Info.
I have MDA compact
I have a corporate Vodafone UK sim card..GPRS enabled.
Please help.. :?
Check this link,u can find every network setting there:
http://forum.xda-developers.com/viewtopic.php?t=13498&highlight=o2+mms
Cheers.
kuangtian - i have done that but no luck
Hi thanks
But no luck..any more ideas
:?
There are Vodafone Contract and Pay as u go.Quite different.Did u selected the right one?
Just download the right cab and install it.
help please
I did download the contract one..but no luck..message comes..up that the download ay not work as it was designed for previous windows mobile software...
so u should try the last one.I just tried on my friend's [email protected],it works.
cross your finger man.
No luck please help am desperate..vodafone setting required
Please help vodafone setting required for gprs.
MDA compact
"ISP" connection
APN - internet
User and pass - web
"Work connection" (For vodafone live)
APN - wap.vodafone.co.uk
User & pass - wap
Proxy - HTTP - 212.183.137.12:8799
Proxy - WAP - 212.193.137.12:9201
Proxy - Socks - 212.193.137.12:1080
Proxy settings are required for the "Work" connection
GPRS - Vodaphone
Click on this link below:
http://www.filesaveas.com/gprs.html
You should find the info that you need here......
no luck yet
Spoke to vodafone..they said i am gprs enabled via the blackberry tarif.,
However i havent got a blackeberry ..i just had bog standard nokia issued to me from work...which i switched the sim to my mda compact..but cant get GPRS work..
I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks
naacdw said:
I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks
Click to expand...
Click to collapse
Give this a try. It doesn't have the 8525 listed (of course). But I'm sure you can choose one of the other devices and the info should be somewhat standard.
gprs settings for suncom
I am using an HTC TyTn, it is very similar.
the settings that i haqve gotten to work after much trial and error are as follows.
make a new connection called "internet"
Cellular line GPRS
access point name: mobileinternet
user name, password, and domain are blank
and thats it.
MMS settings are:
create a server i called it suncom mms
gateway: 66.150.33.115
port:9201
server address: http://mms.suncom.net:8088/mms
connect via: i set to my isp (im not sure if this matters but it is working)
wap version: WAP 1.2
The wap version and port number are fixed on my phone. I have found that the port number is more inportant than the wap version.
I hope this helps.
thanks for the settings but I am still unable to send MMS --I set the WAP as the gateway #is that the correct place to enter it
Hi I have a Tytn II with Dutty's WM6.1 Official UC 5.2.19199 RTM
and I want to use these settings for the MMS but I don't know how to create the server.
I've looked through the phone but can't find it.
Can anyone help me out?
1 thing he messed up on..on the connect via dont put " my isp" put the internet