Hello,
I am just wondering, can somebody tell me, where I can find or Buy Scroll wheel for my Tytn ?!
Best regards, xiPod.
xipod said:
Hello,
I am just wondering, can somebody tell me, where I can find or Buy Scroll wheel for my Tytn ?!
Best regards, xiPod.
Click to expand...
Click to collapse
Do I dare ask what happened to the one that was on your phone!?
When my Tytn fall down, i lost him, that is all, all other function are ok for more than a 1 year, but now i want to find and put him.
i'm actually in the same boat as you!
dropped my jasjam and the wheel itself snapped off its base.
think i'm going to try some glue work before buying a new one though.
just need to think of something suitable to act as a little base for it...
I believe someone ordered one from here:
http://www.gsm4world.us/shop/htc-c-210.html
You won't necessarily see the part listed on their website, but you can contact them or indeed any other PDA parts companies listed at my site below.
It's HTC part No 51H00350-00M It's actually referred to as the Flash Light Module because it has the flash on that daughter board as well as the scroll wheel.
Mike
mikechannon said:
I believe someone ordered one from here:
http://www.gsm4world.us/shop/htc-c-210.html
You won't necessarily see the part listed on their website, but you can contact them or indeed any other PDA parts companies listed at my site below.
It's HTC part No 51H00350-00M It's actually referred to as the Flash Light Module because it has the flash on that daughter board as well as the scroll wheel.
Mike
Click to expand...
Click to collapse
Thanks Mike, i was on holiday, i will try to buy a part.
gsm4world posted the scroll wheel
here you go:
http://www.gsm4world.us/shop/cingular-8525-8525-scroll-wheel-p-1401.html
I feel it is a bit pricey at $26 since I can get a new phone with incentives for $100... I'm trying to see if they will lower the price.
Related
I have heard somebody had found a place that you can order basically just about any HTC part, but after hours of searching I cant find anything. I think the post addressed where to get HTC replacement stylus, but the link provided in the post went to a website that offeres all kinds of differnet parts for the Wizard. Does anybody know of this post or where I might go for HTC parts?
Thanks!
I would like to know as well as I want to get an english only keyboard
i need this too!
i need a mainboard and battery cover.
oh and stylus. dont think the ones i got on ebay will be right. [don't have them yet.] stupid ebay.
i think u can do it from htc america's website
More about parts for the Wizard
mkabani said:
i think u can do it from htc america's website
Click to expand...
Click to collapse
I called HTC America and they are NOT willing to sell parts....I needed a replacement power switch for my 8125 (broke it putting it back together after replacing screen).
I saw a different thread here with some part numbers for Digi-Key and it turned out to be the switch that is used for the Camera/comm/voice buttons. (Digi-Key part #P12280SCT-ND--I have 4, let me know if you need one) In the end,I ended up buying one from Pocket PC Techs $15.00 for the power switch. After comparing it to what I have found on Digi-Key, I have narrowed it down to part #P10849SCT-ND. Now (hopefully) you won't have to pay Pocket PC for your switch like I did!!!
Hi. My special needs son used a set of keys as a stylus and has made a couple of holes in the screen. I am in the UK and can buy a new screen for £65 on eBay but can find no instructions for fitting it. The firm will fit it for me but this cost an extra £25.
Anyone help me out please with some information?
Thanks,
Doug
Can get a replacement if I knew how to fit it! Anyone know please?
dougproctor said:
Can get a replacement if I knew how to fit it! Anyone know please?
Click to expand...
Click to collapse
It's amazing what you can find if you use the SEARCH function instead of bumping your own post the same day....if you were that desperate for it try searching yourself next time?....
http://forum.xda-developers.com/viewtopic.php?t=43836
In fact, my friend, I used the search function before I did anything and it came up with about a thousand hits of which the first hundred were no good!
I am quite desperate for this information, hense the bump before it went off the page. Keep smiling.....
Doug
Learn to use the search engine? It came up straight away if you use the 'all words' function....and I attached the link for you but you obviously haven't realised as 'you are' desperate for the info not 'you were'...
Oh well. I'd just pay the £25....
Thanks for the link anyway. I have downloaded it but it looks so complicated, I will pay someone to do it anyway.
Sorry to be a bit sarky, the link was appreciated.
Doug
dougproctor said:
Thanks for the link anyway. I have downloaded it but it looks so complicated, I will pay someone to do it anyway.
Sorry to be a bit sarky, the link was appreciated.
Doug
Click to expand...
Click to collapse
Another reason to get the screen vendor to fit the screen is that there are 2 possible screens for the wizard - unless you have opened the phone before purchase you will not know which, so if they post you 'a' wizard screen you may get the wrong one and I doubt they'll take it back. If you send them your device it's their problem if it's the wrong one, just watch they don't blame your board for being faulty and try and charge you anyway.
Some vendors sell magician screens saying they fit wizards and this is true in some cases but not all. The 'wrong' screen will display strange colours and look washed out or not display anything.
From experience, most ebay screen vendors etc don't actually know this.
For the total price ( £90) why not try HTCEuropes's service dept if you have a t-mobile vario? They don't touch o2 devices and may be slightly more than £90 but they will fit the correct screen and your warranty will not be invalidated.
I want to purchase a PDA-Phone based on the Hermes platform A.S.A.P.
I would like to hear the opinions of people that saw more than one version of these devices, in order to make an... "inspired" choice.
There is one limitation though: the PDA-Phone mustn't be one of the ones that were branded by carriers (e.g. I can't buy the Orange SPV M3100, the Vodafone one etc.). There is a good reason for this so there's nothing I can do about it.
One other thing: there's no issue about where to buy the phone. I can get it. Just recommend something nice!
Thank you in advance for all your posts !
Cheers,
Screech
Go to the HTC website, they have a list of suppliers of their phones without a simlock; http://www.htc.com
10q for the reply
Olipro said:
Go to the HTC website, they have a list of suppliers of their phones without a simlock; http://www.htc.com
Click to expand...
Click to collapse
Can you be more specific as to the exact URL for this list. I looked around and didn't find a thing. Thank you again!
Screech
I think your choices are the HTC TyTN or a QTEK. Go to expansys to see the devices, and frankly if cost is no object, just buy from them too.
V
cscrieciu0 said:
Can you be more specific as to the exact URL for this list. I looked around and didn't find a thing. Thank you again!
Click to expand...
Click to collapse
Yeah, probably you want to give him your bank account information and address so he can order the phone for you on your behalf. And possibly fetch the phone for you from your front door to your bedroom while you lie on your bed
http://www.htc.com/ -> Europe -> Product -> TyTN -> Where to buy?
Can anyone lead me to where to find a spare enclosure (not an external case).
The one that holds the whole thing together. Ok I need some help here to find the right term
My Athena fallen and I now got a bent Athena. An art piece I'm sure, but rather have it back to its shape, you know?!
So does anyone know where to find spares?
why dont you take a picture so we could see what exactly you need
Will need to find a mirror as it is the only camera I have
Anyhow I just find what it is. Is the SHELL. The black aluminum shell.
Is anywhere to be found it as a spare?
Thank you
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
silviu.h said:
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
Click to expand...
Click to collapse
Thank you.
I ordered the spare casing. Will post how it goes....
Sorted!!
I have received the casing, followed instructions and I now have a bright new Athena
The only bad thing is that the camera button and the volume sliders are missing from the replacing casing. and the camera button is a nightmare to take it over from the old one.
If anyone needs assistance with replacing the casing, just PM and I'll do my best to help.
So which did you get in the end, the brando one?
I'm contemplating doing mine at some point, it's pretty scarred.
I did go for the brando and it took about a week to receive it in Scotland.
The instructions are quite easy to follow, but the tools are a must, specially the flat tool to push the parts open. I got mine here when I repaired my powerMAC a few weeks ago.
does someone know where to get a new digitizer? my one is broken (the LCD itself is still fine) and I ordered this one. But they refunded me my money and said they are out of stock
Any suggestions?
Try the brando website.
It looks like they have a lot of spare parts...
If you can't find it, try to contact them, I got a few parts not listed this way.
Good luck
nForce
does someone know where to get a new digitizer? my one is broken
Click to expand...
Click to collapse
You can try here
http://www.gpsmidlands.co.uk/index.php?category=Pda Digitisers
but this is £90 of her majesty money
the one in your ebay link for £19 is unbelievable, are they for real?
Regards
they said they are out of stock but they promised to contact me if they get some "digitizer-only"
currently they only have full LCD screens for £150
as far as I can see the dealer seems to be realiable...
Hi,
I got my Kaiser Screen broken. The phone still functioning, even touch still working/responding. There're cracks & part of LCD darkened & I worry it might get worse by time/use.
Question:
HTC no longer sell devices in my country. What is the reasonable price + shipping? Any reputable seller that ships to my country & payment method?
Thanks for tips.
Edit:
Got the screen replaced & working perfectly!
Use the 4 screw method, without opening the base, took me 20 mins only
Thanks to Mike Channon, Erwinpiero & many others that fixed themselves & posted on this forum!
Well i'd say eBay is your best bet and I wouldn't pay more than £30 (450,000rupiah) delivered for one. Plenty of people selling them from China, just make sure it has a digitiser, and it's the right model. Oh and pay by something secure like Paypal so you have something to fall back on incase its a bad sale.
stuntdouble said:
Well i'd say eBay is your best bet and I wouldn't pay more than £30 (450,000rupiah) delivered for one. Plenty of people selling them from China, just make sure it has a digitiser, and it's the right model. Oh and pay by something secure like Paypal so you have something to fall back on incase its a bad sale.
Click to expand...
Click to collapse
Thanks.
I think that's reasonable approach, but I'm looking if any member have dealt with particular dealer that delivers .. something that minimize the risk (at least, it's the right item and got delivered). Yes, we can fall back, but I don't think the process is easy, and especially Pay Pal in ID has no legal vehicle, the site refers to SG. That's the reason I try not going blindly if there're any referrals.
In any case, I'll look around, and update when the screen is fixed ..
Useful links
To anyone looking for info, here're good ones (apart from Mike Channon's site)
http://www.formymobile.co.uk/vodafone1615disassembly.php
(using this method, was what I did, and changed the screen in 20 mins)
And I learnt a lot from our own forum here:
http://forum.xda-developers.com/showthread.php?t=337102
Good luck to everyone.
I haven't replaced a screen on my xda stellar yet but i did have to replace one on my xda 2.
I purchased mine of ebay at a store. e-shop I believe it was called. I would recommend that you dismantle the phone first. There were 2 screens available for my xda 2 and the only way to see which one i needed was to see the connectors on the back of the screen. It may be the same case for the tytn 2.
Also make sure you are purchasing a screen with the digitiser attached. It is possible to replace the touchscreen part but believe me it's not worth the hassle.
Good luck
Thank you very much! Unlike TyTn / Dopod 838Pro, Kaiser screen is luckily pretty standard. The replacement was easy as I got the one complete set (screen & digitizer).
It's now fixed & working well.
That's great news!! I just came on to point you towards the service manual for disassembly (google htc kaiser service manual for anyone else who is interested).
I'm considering replacing the external housing of my stellar, it has seen better days! Having seen the procedure to take the pda apart i'm having second thoughts. Glad you found it easy to replace the screen it looks far worse than what i went through with my xda 2
honosuseri said:
That's great news!! I just came on to point you towards the service manual for disassembly (google htc kaiser service manual for anyone else who is interested).
I'm considering replacing the external housing of my stellar, it has seen better days! Having seen the procedure to take the pda apart i'm having second thoughts. Glad you found it easy to replace the screen it looks far worse than what i went through with my xda 2
Click to expand...
Click to collapse
Google Mike Channon .. he has a great manuals for many devices
Appreciate the tips
spammer said:
you can visit my website --spam-- and find the item LCD Display+Touch Screen for HTC Kaiser/Tytn II/P4550/TILT 8925
hope that it will help you.
thanks
Click to expand...
Click to collapse
I got it fixed already (please see my update)
Urgent help
anagarika said:
Hi,
I got my Kaiser Screen broken. The phone still functioning, even touch still working/responding. There're cracks & part of LCD darkened & I worry it might get worse by time/use.
Question:
HTC no longer sell devices in my country. What is the reasonable price + shipping? Any reputable seller that ships to my country & payment method?
Thanks for tips.
Edit:
Got the screen replaced & working perfectly!
Use the 4 screw method, without opening the base, took me 20 mins only
Thanks to Mike Channon, Erwinpiero & many others that fixed themselves & posted on this forum!
Click to expand...
Click to collapse
DEAR
Please guide me to the "the 4 screw method, without opening the base" becuse i have a broken lcd and anew lcd from ebay (25$) and the tools, so everything is ready for action!!!
any instructions, photos, details, pic...etc. would be highly apreciated.
but I need an easy method to do that without dismantling the base and remove the "void" label.
Many thanks in advance
abudraih said:
DEAR
Please guide me to the "the 4 screw method, without opening the base" becuse i have a broken lcd and anew lcd from ebay (25$) and the tools, so everything is ready for action!!!
any instructions, photos, details, pic...etc. would be highly apreciated.
but I need an easy method to do that without dismantling the base and remove the "void" label.
Many thanks in advance
Click to expand...
Click to collapse
It's right on post no. 4 above
abudraih said:
DEAR
Please guide me to the "the 4 screw method, without opening the base" becuse i have a broken lcd and anew lcd from ebay (25$) and the tools, so everything is ready for action!!!
any instructions, photos, details, pic...etc. would be highly apreciated.
but I need an easy method to do that without dismantling the base and remove the "void" label.
Many thanks in advance
Click to expand...
Click to collapse
Please read carefully. The two links I provided contain that information.