I'm having a problem installing Valentin Iliescu's Chess. When I run the .exe from my computer I go through all the steps until it says to check my device for further instructions. I then try to install it on my Wing but I get this error message: The .NET Compact Framework could not be found. Please install .NET Compact Framework and run the installation again.
I try to install it on both my SD card and my device but no go...
As far as I know I have the latest version of the .NET Framework seeing as I have WM6.
Any advice?
WM6 does have .net built-in, but it CAN be removed by the cook.
Ivan did so when building Just2Clean, it says so on the first page of the thread.
"Well there's your problem!"
...How embarrassing... -_-'
Thanks for the help though! I appreciate it
yep. we've all had our moments.
mine was this asinine question about what "aserg's method" was
Related
Hi,
feeling very silly for asking... how do you install Compact .Net?
Or better: how do you get it to be recognized by the system?
I have installed the latest Cnet 2 SP1 version, which appears among the installed apps both on my desktop Pc and on the Wizard... but HitchHiker won't install as "you need Compact .Net installed..."!!!
I know I did find a solution a few months ago when first installing the damn app, but I can't remember what it was. I searched the forum and I only found a suggestion to close all the running app on the Wiz, but this doesn't seem to work.
Can anybody provide a reliable procedure to get it working?
TIA!
hi there
from your post it seems that you have not install .net compact framework on ur wizard.
it is very simple, all you need to do is to find out if you need .net compact framework v1.1 or 2.0? i am not sure if both is compatible with each other.
then goto micrsoft website and search for the download link to either one. download the installation file to your pc and run the installation there. it will install on ur wizard over activesync.
Not so simple, in fact.
I'm using the right build, and it installs nicely both on the desktop Pc and the Wiz.
Only problem is: when I try to install Hitchhiker (from the PC, as it is the only possible setup), it doesn't recognize the presence of C.Net.
did you install in a storage card or ram?
have you got the right version?
No more blues!
The problem wasn't in c.Net at all, but in the faulty instructions for HitchHiker! It turns out it needs BOTH c.Net and the "normal" .Net framework to be installed, but they only state it needs the Compact flavour.
I just wonder how come nobody else came up with this issue before...
Thanks to everyone, however!
now this really puzzled me. does wm5 able to run .net framework as well as compact framework? as far as i know wm2003 only able to run .net compact framework.
how do you squeeze 20mb of file, not to mention not mobile device install file for .net framrwork?
I don't. Compact .Net does a double-install on both che desktop and the Wiz, while "normal" .Net framework only installs on the desktop, but is apparently needed to get the Hitchiker app to install... on the portable device.
There WAS a reason for which I couldn't get around it all, y'see?
Hey guys,
Everything goes smoothly until i attempt to instal the touchflo. I get this error message,
" .Net Framework Initialization Error - "To run this application, you must first install one of the following versions of the .Net Framework: V2.0.50727 Contact your application publisher for instructions about obtaining the appropriate version of .Net Framework"
Am I going to have to download the .Net framework program or is there anyway to bypass that? Thanx a bunch guys! Sorry if I sound like an idiot.
That's strange... I've never seen that because I've always had the .NET framework on my PC's since it came out... What OS are you using and how come you don't have it?
Most programs these days are coded in .NET, so if you dont have those components then they won't run...
What program are you running that says that?
I'm running XP Pro, but I usually uninstal the .Net framework because it messes up the way my computer runs. I'm trying to run the 1_upgrade_rom for touchIT 2.3 for the wing. It'll be mid process and then it shows the forceful disconnection. If i need to install the program does anyone have a link so that I can download it?
I had that issue .. i dont know how i fixed it, but im sure i ran this CAB
http://www.pocketemu.com/download7.html
So then you ran the cab on the Wing and then the problem stopped occuring?
yea, i didnt have any issues/ errors after the first install
Alright thanx man. I was about to try to run the installation off of my sisters computer. She has a shadow so I know she installed active sync. its frustrating for me to not have something i need because sadly im still running off of a 56k internet connection :'(
I just finished downloading it and it didnt install, it said that it already exists in the rom. Off to my sisters computer i go
This sucks, not even my sisters computer can run the installation.
Hey all, i develop small applications in visual basic 2008 and i want to know how i can get my applications to run on my i mate k jam, if i just put the app on and try and run it i get a really long error message which is:
File or assembly name
'Microsoft.VisualBasic, Version= 8.0.0.0
Culture=neutral
PublicKeyToken=B03F5F7F11D50A3A
Or one of its dependencies, was not found
and then when i close the appliction i get this error
NET CF Initialization Error
The application failed to load the required componants if the .NET compact framework is installed on the storage card, please ensure that this card is in place and launch the application again. if this fails, a re-installation of the .NET compact framework is recommended. Support info: 2147483643
(80000005)
Any help would be great thanks !
Have you already installed the .NET compact frameworks:
3.5: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&DisplayLang=en
and
2.0: http://www.microsoft.com/downloads/...2F-07B5-4A8C-8A44-B4E1B196D5C0&displaylang=en
(I think VS2008 may only require 3.5, but it's probably better to install both)
and the SDK refresh
http://www.microsoft.com/downloads/...3A-A651-4745-88EF-3D48091A390B&displaylang=en?
Ok thanks for the advise i will try that and then post back with the results
Most apps here require the latest .net Compact Framework. Here is v3.5 cab which works on Diamond/Touch Pro:
http://rapidshare.com/files/150399830/NETCFv35.rar
EXE:
http://rapidshare.com/files/130519938/NETCFSetupv35.msi
http://download.microsoft.com/download/c/b/e/cbe1c611-7f2f-4bcf-921d-2df718591e1e/NETCFSetupv35.msi
Remote Desktop:
http://rapidshare.com/files/151331556/Remote_Desktop.rar
.Net Compact Framework v3.5 + Remote Desktop:
http://rapidshare.com/files/151332489/Missing.rar
thanks but er
how do i install it?
i mean i installed once but i forgot..
and i formatted the phone
now i connect the diamond in activesync then run netcf... from my computer
then on my diamond theres the ''do you wanna install'' screen
then i click yes and it says install unsuccessful
the cab should run on your device, so just copy it over then run it
cab file name is: NETCFv35.wm.armv4i
okay thanks i will try that
hi, im getting install unsuccessful, untrusted certificate error message....
any ideas?
Thanks
Ed
no idea sorry.
here is another file that is missing:
Remote Desktop: http://rapidshare.com/files/151331556/Remote_Desktop.rar
Dude Is there A Cab I Can Just Install Threw My Phone My Pc Is Jacked.
Hello, I am trying to install frameworks to DiamondTouch , but the problem is that I am "green" , can You expain me how to do that ?pleasssse
Mirror link for cab file
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
im using imate ultimate 8502 and running the windows mobile 6.1...
where could i find the .net compact framework v3.5???
thx
You can find it here:
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
Can you make another download . RapidShare asks for Premium User which i don't have .
thanks a lot
It is not a big file and you can download it as a free user easily.
it says become a premium member...
compact 3.5
went to link (rapidshare) - did free user download - received message that the download was
unsuccessful. i am running a paid version of spb mobile shell, have the basic rom and radio that came with phone. is there anywhere else to find this? i had it before, but have had to get refurb phone...again..so not sure where to find it. thanks
ps also- i know am in wrong part,but really would like to know more about new rom and windows 6.5, how easy or should i say hard is it to
put it on here? though, i do understand that u guys have already did the hardest part.
I am traing to install NETCFv35-ALL-IN-ONE.cab and it keep having an error msg saying
"Instalation error. Stop all aplications and processes, maximize available disc space and execut the installation again. Support informations: 2."
I all so traied NETCFv35.wm.armv4i.cab and hapens the same.
I have instaled on the phone .net 2.0.7045.0 (ROM) do I need to uninstall this first?
And sorry about my english
My Phone is the touch HD
Hi.
I have the HD2 T8585. Now I have installed CHT and CHTEditor. The problem is that CHTEditor requires .NET CF v3.5.9198. I tried downloading .NET CF from Microsoft but I cant install it since I have a newer version. So I download the .NET CF from here and when I try to install it it says that I have the same version installed in the ROM(i have the stock ROM). I then downloaded the netcfcfg and set CTHEditor to run with .NET CF v3.5.9198 but it gives the same error.
The error is: .NET CF Initialization Error
"To run this application, you must first install one of the following versions of the .NET Compact Framework: v3.5.9198. Contact your application publisher for instuctions about obtaining the appropriate version of the .NET Compact Framework."
BTW, I now see that some other apps, such as Bing, wont run, they give the same error.
Ty in advance.
Edit: Since nobody has answered I'll try to make it simple.
The .NET CF 3.5 that came with the phone ROM wont work. And i cant reinstall it since its in the rom.
BUMP.
sry for double post but i srsly need this, and google wont help.
BUMP, three days, no answer.
do a hard reset, if that doesnt work reinstall the rom or try one of the chefs custom roms they are all very good.
unfortunately it sounds like you have tried all the options to avoid having to do this already.
at last
ty for the answer.
btw i have tried to install a custom rom but my phone has a strange error in active sync. when i copy a file, it gives me an error that the device has been disconnected but it copies the file, but this doesnt happen when i connect the hd2 as a usb stick. and because of this i cant install HSPL.
Edit. whew it worked like a charm.
PS. now i need to get all my contacts