Can any1 help me with my keyboard or knows how i can fix this? i have to press extra hard on the buttons for them to work. before it was the "I" key now its the I U and K. i figured it had to be dirty or its something from the inside around that area . Can any1 help please!!! this is really annoying!
my T button is like that and my E is extra sensitive
you either have to call t-mobile and tell them your keyboard is broken or you can open it and clean it yourself but you gotta be really really careful and its kinda tough to do
i found this guide...http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-home&trurl=http%3A%2F%2Fwww.pdacenter.ru%2Frazborka%2Frazbor_htc_kaiser%2F&lp=ru_en&btnTrUrl=Translate but im scared my wing is all i have!!
Related
It feels like the slidebutton is loose and it dont respond sliding it.
Should it be a spring or something to reject the button after sliding?
PLZ,,e-mejl me at [email protected] if anyone got a picture or know
how it should look like.
the u/2 button stopped working and starts randomly pressing itself every time i turn it on... and it randomly presses itself during texting as well and the u/2 button doesnt work its kinda getting annoying now.... can any one help or have any suggestions on what to do.... thanks
any ideas?
u/2 ...? What is that...?
It's probably similar to what happened to my Toshiba laptop. I'd get a pattern of letters/symbols when typing on it, because the case/keyboard screws were too tight and it spontaneously would generate these signals. I'd bet something smacked your keyboard or it was pressed too hard and something broke inside.
It's probably not user repairable, at least not easily, and probably a warranty workable item. Flash back to the stock ROM and send it in, especially if this only occurs when using the slider keyboard.
Hope it helps, even if it is bad news.
ElProempie said:
u/2 ...? What is that...?
Click to expand...
Click to collapse
the u button on the keyboard.... and i dont have warrenty on it because i bought it off ebay and i live in canada its a tmobile phone. theres no way i can fix it? like it presses itself when i turn the screen on and sometimes when im writing texts.... but the actual "u" button doesnt work when pressed
It can be fixed, but I don't think it will be easy. That is, if it is similar to what I am thinking. If you're daring, or desperate, you can try disassembling the unit to see if something is cut or pinched, causing a short.
Is anyone here familiar with the hardware side of this unit?
dirtisgood said:
It can be fixed, but I don't think it will be easy. That is, if it is similar to what I am thinking. If you're daring, or desperate, you can try disassembling the unit to see if something is cut or pinched, causing a short.
Is anyone here familiar with the hardware side of this unit?
Click to expand...
Click to collapse
I think it doesnt make a good contact with the mainboard.
If you press the button, does it feel different then other buttons..?
Otherwise it could be alot of things but the best thing to do is to take it to your carrier store.
Maybe they could do something for you.
nope the button feels just like any other button when i turn off the screen and turn it on it dials 2 a few times... and when i text sometimes the u button repedetly comes on the screen.... =( its so annoying
Hello, I don't mean by this title that some key are missing on my uni, I just mean that sometime, when pushin a, n, r and some other keys, it doesn't write anything, I have to push the key a bit more: Is everybody having this problem or my qtek is just being too old ? And in anyway, since it's begining to be really annoying, what's the best I can do, buy a bluetooth keyboard or something else (if there is) ?
Ofc, the warranty is expired.
Thanks for you help.
try taking it appart and cleaning the contacts
go to instructables.com there is a guide on how to fix buttons on a remote control, I would think the same fix would work on the buttons if cleaning does not work.
It's not the same for the uni, the buttons are not easy to separate, well, in fact it's easy but I'm near sure it would break it. Anyway, it seem I found a working fix, I just pushed once each button a bit strongly and I seem to not have this problem anymore...
My Diamond is about to go in the bin!!!
If anyone knows how to edit the registry to "switch off" the volume keys on the Diamond then please, please, please help me.
The volume screen is permanently flashing on my screen, and seems to be stuck on the up button which means I can't use the phone. it's not a hardware issue as the buttons aren't stuck or won't work, it's from a bad flash (according to HTC!) - i've tried stock roms/MTTY etc but the problem still persists from one rom to another.
Any registry experts willing to help
Not sure how you can achieve this if the volume is always on top but if you install AEbutton you can unmap the volume buttons
thanks for the reply i'll give it a try
What happens if you leave out volume control? I guess MS volume control would prolly pop up then ?
skilty said:
My Diamond is about to go in the bin!!!
If anyone knows how to edit the registry to "switch off" the volume keys on the Diamond then please, please, please help me.
The volume screen is permanently flashing on my screen, and seems to be stuck on the up button which means I can't use the phone. it's not a hardware issue as the buttons aren't stuck or won't work, it's from a bad flash (according to HTC!) - i've tried stock roms/MTTY etc but the problem still persists from one rom to another.
Any registry experts willing to help
Click to expand...
Click to collapse
I can almost 100% sure tell you that it's hardware there is a sensor underneath the button that is probable stuck. because if it wasn't then a rom flash would have fixed it. there is a spray don't know what it's called in
English but something like contact cleaner it cleans electric parts for dust
gullum said:
I can almost 100% sure tell you that it's hardware there is a sensor underneath the button that is probable stuck. because if it wasn't then a rom flash would have fixed it. there is a spray don't know what it's called in
English but something like contact cleaner it cleans electric parts for dust
Click to expand...
Click to collapse
Thanks for the replies everyone, AE button seems to have fixed it, although i'm not 100% sure that it's gone yet, as it could stop for a while and start again.
HTC did say it was a hardware fault caused by installing hard spl/custom rom (although I only left Hard spl when I sent it back..by mistake ) and wanted to charge me £230.
i'll try the spray cleaner anyway I don't think it will do any harm.
Thanks again for all the replies, at least it's semi-useable again...
Hey guys so im having a hardware issue with my Droid X... my Back Arrow button has stopped functioning.. which is why i HATE hardware keys... the Capacitive Touch Buttons have a much less chance of failure because its not an actual button that can get worn out...
Anyway is there anyway I myself can easily open the phone up and try and see what the deal is with the clicker button or do I have to send it out to get repaired?? I HATE getting refurb phones back from verizon and thats the last thing I wanna do is give my phone up