Help me to check the lock or un-locked?

Help me to check the lock or un-locked? - Wing, P4350 General

I Use the MTTY to got these information as follows,
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x79B00000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
So, pls tell me, My phone was locked or Un-locked?

I have no idea what that is, but why not just try a non-tmobile sim card. If it comes up looking for an unlock code its not unlocked

Oh, I am using my HTC 4350 in China, and my SPL is 4.17.0000, OS is wm6, 5.2.1238.
I want updated to WM6.1. So, I want to know my phone's state (Locked or not), and how to updated?
Thank you

Ahhh okay. I believe you are with at spl, does it say anything next to it such as yang? If not you can always flash hardspl onto your device

Related

how to convert nba to nbh?

Hi all,
I bricked my phone when trying to upgrade to wm6, i made a backup of rom and ext rom with awizard, but right now i only have the bootloader and cant upload that files.
Could someone guide me how to restore?
btw, i have a portuguese phone locked to optimus, if any portuguese could dump a rom fot this i really apreciate.
Thanks

if your phone is stuck on bootloader try this from mtty:
Code:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
If this doesn't fix it, you can only fix it by flashing original shipped ROM (matching your CID) on it.
Even if you create a NBH from a dumped rom, you won't be able to flash because it won't be properly signed.

Thanks,
I will try and post if work

With this:
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
I imagine that I need wait unitl original HTC ESN ROM for my HTC, isn't it?

when i input the command: ruurun 0
"HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>"
phone display a bar with 0%
after resetdevice still dead...

How to make GOLDCARD in an Easiest way???

Hi...
can anybody know how to make Goldcard using QMAT...
Please help me how to do that, or something guide...to flash my phone using memory card...
tia...

oasisnhoa08 said:
Hi...
can anybody know how to make Goldcard using QMAT...
Please help me how to do that, or something guide...to flash my phone using memory card...
tia...
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard

goran_cipko said:
http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Click to expand...
Click to collapse
Hi..
can you tell me what wrong in this logs..
Code:
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
PL_SDSetSlotNumber() - MPUIO_SDIF_SEL1=0, MPUIO_SD_IF_SEL=0
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1E580000 Bytes
SDInit---
SDInit OK
Unlimited time!
[B]GetDeviceCID: Error - InitDecoder[/B]
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF
TIA

elf0100 after mtty

cmd
Invalid command : cmd
For a help screen, use command ? or h
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>ruurun 0
Cmd>getdevinfo
HTCSELF010050gUH¥HTCE
Cmd>ResetDevice

plzzzzzzzzzzzzzzzzzzzzz
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

plz
HTC Touch device information - by dsixda
Touch version : Elfin
Device ID : ELF010050
CID : HTC__203
IPL : 2.20.0002
SPL : 2.20.0000
ROM Version : 2.20.406.1
ExtROM Version : None
Operator Version: None
AKU Version : 0.4.2
Page Pool : 12 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number : 99HEH044-00
MCC+MNC : Not found
IMEI (private) : 356786013167014
Serial Number (private): HT828G605010
MAC Address (private) : 0018418D691F
i flash by this version HTC_Touch_FRA_2.20.406.1B now phone is ok on but simlock and need rom english and best hardspl

HardSPL
http://forum.xda-developers.com/showthread.php?t=445666
Stock rom should be somewhere floating around, but Im having quite poor wifi reception here.

Precise querstion for XDA Experts

Hello Experts and thank you for your help,
i have a bricked artemis, and i try to create gold card to recover my pda, no method worked, my last chance is QmAT, my problem is the result RUURUN fail at the end of the test:
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x78000000 Bytes
SDInit---
SDInit OK
Unlimited time!
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
RUURUN fail
HTCSF

up, come on XDA experts,
any idea ?

elf0300 problem

hello supporters ,
i have one htc elf0300 mobile . it is come to change language french to english . then i have try to restore with another firmware .
after finished restore i have try to power on the mobile it show "smart mobiltiy " and then switched off . then i try to restore with another firmware it
shows error 244 . then try to do hspl via mitty program . it is also shows error like this
set 32
set 32
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = FF
HTCE
Cmd>lnbs spl228.bin 82000000
lnbs spl228.bin 82000000
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
also tried with memory card method . it shows " chcking sd card " and then go to tri colour mode . nothing happen.
before flashing my mobile is
spl2 2.81.0002 spl 2.81.000
after flash it is changed to ipl 1.15.0002 spl 1.15.000
pls help supporters to recover my problem . :crying::crying::crying::crying:

pls support developers . pls help me

there is no reply from supporters still waiting 6 days

still waiting for reply

there is no reply from supporters .

Please Help help help
hello boys from the problem
my hands broken an elf machine
and does not react anything
solely MTTY and smooth Boot mode
no active sync not device not connected device
reset device resume and green LCD
help you and response
Thanks in advance
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCEType (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>

Database Users

welcome

Help me to check the lock or un-locked? - Wing, P4350 General

I have no idea what that is, but why not just try a non-tmobile sim card. If it comes up looking for an unlock code its not unlocked

Oh, I am using my HTC 4350 in China, and my SPL is 4.17.0000, OS is wm6, 5.2.1238. I want updated to WM6.1. So, I want to know my phone's state (Locked or not), and how to updated? Thank you

Ahhh okay. I believe you are with at spl, does it say anything next to it such as yang? If not you can always flash hardspl onto your device

Related

how to convert nba to nbh?

How to make GOLDCARD in an Easiest way???

elf0100 after mtty

Precise querstion for XDA Experts

elf0300 problem

Categories

Resources