Related
I did a quick search and couldn't find anything specifically on this topic.
I just tried this install and it went smoothly with no problems. I am able to see all of my contacts, I can call my contacts and they can call me, however, I can't seem to get any audio - they can't hear me and I can't hear them.
Is this similar to the problems with the previous versions? This version specifically says it is compatible with Windows Mobile 6.1 (I have DCD's latest ROM)...
skypes been broken in wm6.1 for a while, it seems that this one didnt fix it. has someone with a 6.1 stock rom tried the new skype? skype doesnt care about dcd roms. they only make sure that their software works with official roms. it might be an issue with them not supporting the titan, at least if it doesnt work in the stock rom than thats what it is
greymatter said:
I did a quick search and couldn't find anything specifically on this topic.
I just tried this install and it went smoothly with no problems. I am able to see all of my contacts, I can call my contacts and they can call me, however, I can't seem to get any audio - they can't hear me and I can't hear them.
Is this similar to the problems with the previous versions? This version specifically says it is compatible with Windows Mobile 6.1 (I have DCD's latest ROM)...
Click to expand...
Click to collapse
with previous versions of skype on wm6.1 would freeze; I think I noticed the problem after I upgraded my radio to enable gps. On the htc touch (cdma) with the new version (2.2.0.45), I'm having the same problem. Skype opens and loads just fine, but no audio. I've posted about this problem on the skype forum of the skype website, but no reply yet.
yup, seems to be the same problem with fring too except I can actually hear stuff with the fring.
With skype, I get sound on the speakerphone with the new version, but I only get the first ring and the hangup sound, thats it.
Good thing for skype to go! I have a unlimited calls to 5 favorite numbers so I can use that meanwhile.
The best thing possible tho would be to have AGEphone mobile with the fix for the Titan\Mogul (they have a fix for the HTC trinity, Hermes, Touch (Dual) and Kaiser)
Hi all,
It seems there is a native VOIP client inside the HD (I have the menu inside the Com manager). But It is disabled
So, there is a way to enable it on our HD ?
Is it work with the internal Speaker ?
No one has try ?
you have to install some cab files.. search the forum here, it has some instructions about this. maybe in the other WM6.1 device forums.
it works, but is very limited and you have to edit a xml file to set up your voip account.
Is someone has already tried on the touch HD ?
i have a touch hd and it works on it
How to configure/use ?
grandslam said:
i have a touch hd and it works on it
Click to expand...
Click to collapse
You are not using fring or something like that, right ?
What do you use to configure VoIP provider name, user name, password, etc ?
How do you activate VoIP in TF3d ? I remember that in other WM6 devices, there was Today's plugin, but with Tf3D ?
grandslam said:
i have a touch hd and it works on it
Click to expand...
Click to collapse
Very interresting
Can you explain where and how did you install it ?
Is it use the external speaker (like fring) ?
And how do you choose the dial type ?
This might be the missing link:
http://forum.xda-developers.com/showthread.php?t=299950
Cant try at the moment (still in the office), will do in a few hours when i'm home.
lack of VOIP
I can't believe this phone doesn't have VOIP out of the box, like the N95.
Insane!
Fring uses the external speaker, and it sounds like crap when making a voip call on it.
I tried the voip cabs which are on here, don't seem to work with the HD as well as I'd like.
No luck
6Fg8 said:
This might be the missing link:
http://forum.xda-developers.com/showthread.php?t=299950
Cant try at the moment (still in the office), will do in a few hours when i'm home.
Click to expand...
Click to collapse
It worked fine on my old HTC Wizard. Nothing beats native support for VoIP. But ...
When I installed it on HD, it installs fine, new Today plugin appeared. I configured VoIP setting with Schap's VoIP setup from here (BTW it worked fine on Wizard) ... it shows "Searching ..." for a long time ... never connects and then shows "Unavailable".
Not sure how to resolve this.
bogdatov said:
It worked fine on my old HTC Wizard. Nothing beats native support for VoIP. But ...
When I installed it on HD, it installs fine, new Today plugin appeared. I configured VoIP setting with Schap's VoIP setup from here (BTW it worked fine on Wizard) ... it shows "Searching ..." for a long time ... never connects and then shows "Unavailable".
Not sure how to resolve this.
Click to expand...
Click to collapse
I don't think the HD has the necessary files in the Win dir. I couldn't find them on mine. Hopefully hard SPL and cooked roms are coming soon.
Hi,
I use this software for VOIP on HD:
http://forum.xda-developers.com/showthread.php?t=402463
Client I use:
http://www.nonoh.net/en/index.php
does it work with the internal speaker and does it work over 3G ?
Thanks.
Yes it does.
psykokwak said:
Is it work with the internal speaker and is it work over 3G ?
Thanks.
Click to expand...
Click to collapse
Hi,Lauren I just tried agephone trial version. It does work, but the internal speaker doesnt work. How do u do that? Also every time I open agephone from my HD, it always force to switch on my wifi, is it the same as you? Thank you.
Hmm i dont like agephone...
it was not working for me! it was connecting, a much better sound from the rear speaker.. but it wont work with my front speaker.(also not with the speaker switch option)
The native voip client is giving the same problems as agephone.
Ive got the native voip client up and running (also with working Gps) but the sound is comming from the rear speaker and not the front speaker..
Somebody any ideas?
I have native VoIP client up and running and working fine with one of betamax clones (internetcalls.com). Also works with GPS. Sound comes from front speaker. Tested using WiFi onlym I do not have 3G.
bogdatov said:
I have native VoIP client up and running and working fine with one of betamax clones (internetcalls.com). Also works with GPS. Sound comes from front speaker. Tested using WiFi onlym I do not have 3G.
Click to expand...
Click to collapse
On the Touch HD? can you plz tell me how you do this.
bogdatov said:
I have native VoIP client up and running and working fine with one of betamax clones (internetcalls.com). Also works with GPS. Sound comes from front speaker. Tested using WiFi onlym I do not have 3G.
Click to expand...
Click to collapse
I'd like to know how you do that too
Any one using this 'native VOIP' please explain how to turn it on and use/configure it. I don't see any such thing in my communication manager. Please help.
Thanks Ahead
Hi!
Main problem with Windows mobile for me is that VoIP can't work with internal speaker.
Reading threats here I came to conclusion that it is the same problem as inability to record other side in phone conversation.
So, when I saw ICR (in call recorder), I saw a solution to that problem.
As I understood it is originally from HTC touch HD and it was successfully ported to HTC toch Pro and Diamond.
So I tried a few Pro and Diamond versions found on their forums. And, of course, every time I had to hard reset my device because of loss of phone dialer caused by different screen resolutions.
Only in one case I noticed some improvement in call recording, and I didn't manage to open ICR application at all.
Then I saw this two ROMs for Polaris:
http://forum.xda-developers.com/showthread.php?t=459826
http://forum.xda-developers.com/showthread.php?t=472351
They both have ICR implemented. In the first forum there was a cab posted. So I tried that cab.
I couldn't get "start record" in menu with or without established phone call so I used external recorder Vito audionotes touch.
I could record both sides of conversation but sound level was unequal. And I don't mean like two sides had different sound level (which they do because the other side was louder, like recording with bluetooth hands free, which is ok as long as I can hear both sides well), but complete sound level was changing.
VoIP worked different. I could hear a lot in internal speaker, but I had a feeling I hear the same from external speaker, just quietly. That's why I'm not sure from which speaker sound comes any more.
And ICR application just wouldn't start. When I press icon in programs nothing happens.
So, any solution for this problem is welcome.
If you have any idea how to make VoIP work on internal speaker or how to record both sides of conversation just answer to this threat.
It doesn't have to be a solution. Any idea may be good and maybe we can come to solution together.
You're also welcome to share any experience consdering this problem.
Thank you all in advance!
I have
HTC Touch Cruise
original WWE WM6.1 ROM
ROM version: 3.13.405.0 WWE
Radio version: 1.59.42.15
Protocol version:25.85.30.07W
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
wasabi55 said:
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
Click to expand...
Click to collapse
once you are in call you have to have the "start recording" foctional.
in Start -> Programs you can find the recorded files and options to where and in which format save the recorded files.
emrause said:
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
Click to expand...
Click to collapse
I was told by the autor of 3LIT3 V Rom that you need Iolite dialer for incall recorder to work.
I tried with opal dialer and it didn't work.
I tried this ICR with C_Shekar WM1.60.21014aCS with opal dialer and olso tried on an Elfin with Onyx 4.2 ROM with opal dialer, it WORKS in both devices with no problem. Hope this is usefull for you.
when you say it work do you mean you have start recordin menu when conversaton starts or you can open ICR program and change some settings?
Having start record would be nice, but only that is not crucial to me. Can you post a link to opal canvas whit which this ICR works.
Can somebody post a link to Iolite dialer whit which this ICR should work.
Is there a way to delete original dialer. Because in case I install one of these and decide to use it permanently I would have three dialers installed (one original windows, one original touch cruise, and the one I use).
Did anybody try Voip (fring, skype, SIP ...) with working ICR installed? Which speaker does sound come from?
What options are there in this ICR program?
Thank you all no your answers!
kulen said:
What options are there in this ICR program?
Click to expand...
Click to collapse
Only two: where to write the recordings (memory or storage card), and in what format (wav or amr). Both wav and amr are 8 kHz 16-bit mono, so quality is rather poor.
Hi, i'm using m-amine 2 with opal dialer.
I installed in call recorder cab founded here http://forum.xda-developers.com/showthread.php?p=3277318&highlight=recorder#post3277318
Now i can see "start recording" under menu during the conversation, but if i tap it nothing happens.
When i open icr under programs, no calls was recorded and i can't change the options (no selectable menu appear).
Which is the correct way to make icr fully working?
I installed opal phone canvas and in call recorder. These are results.
-I can't open ICR in programs. When I press on icon nothing happens.
-When having acitve conversation I do have start record in menu. And I can record conversation. Conversation is saved in My Documents/recording.
The other side can be heard but quietly.
-When using VoIP (fring) sound comes from external speaker. If I enable earpiece sound comes from both speakers, but louder from internal.
- !!!And one big problem. Phone doesn't ring neither vibrate.
I couldn't find Iolite dialer cab so if anybody has it please can you post it or provide link?
Any idea how to make this work with original ROM?
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
@chavobravo
Thank you very much for explanation.
Can I just install new cprog.exe?
Can I add AKU 1.4 to original ROM or is it neccessary to find ROM already having that build.
Do you know does this somehow affect problem having VoIP only on external speaker?
Or do you maybe have any solution for that?
BTW I flashed your 3LIT3 VI FULL ROM to try ICR. And ROM is really good. It seems faster than original. Only I like cube more (at least until I get used to manilla) because of beeing able to call it from any program.
It seems the only difference between your ROM and my original ROM with your in call recorder.cab is that in your rom I can open in call recorder program and there is start record in menu. But recording with Vito audio notes and VoIP (Fring) seems to act the same way.
For those (like I) who had no luck with the above registry recipe, or otherwise found that the other side is recorded inaudibly, here's a very simple app (sources included) I wrote for myself.
It runs in background and records all incoming and outgoing calls thru the ICR, and should work with any bios/acu/dialer/etc provided that the ICR cab mentioned in this thread is installed. The app itself requires no installation, and uses the ICR settings for the recoring format and dir.
No warranties etc etc, the app may contain as many bugs as possibly may happen to be found in 200 lines of code, please correct them and use the code at your pleasure, you've got the sources anyway. Hopefully somebody will write something more user-friendly based on it.
is this can useing on the SE X1?
To chavonbravo:
chavonbravo said:
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
Click to expand...
Click to collapse
Are these options suppossed to be in a Jade? After browsing with Regedit, I just can't find them:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
AudioRecording does not exist...
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
Voice does not exist...
Do I have to create them?
Thanks!
How to set icr to auto record any call ?
Tanks
I love incall recorder, I wish everyone would put it in their roms once this is worked out.
It is just too convient of a feature. Some of us have to do work on the cell phones, and it is just to dang convient to hit this and keep going.
I am wanting to upgrade to 6.5, but i want this feature. And just looking at 6.5 now. Wil this work in 6.5? Can i use the link above to get the cab, and then do i need a specific dialer for it?
Default InCall Recorder and 2-Way Record Patch
See this Link
And for the cab file the correct link is here
Am an new user of this wonderfull phone but am missing the voice recording software that i had with the TytnII phone.
Is there a way of getting this back.
Have the Dutch version of the Touchpro 2
Thanks.
can use the Resco Audio Recoder,its a nice software to recoarding...
can use the Resco Audio Recoder,its a nice software to recording...
marhoog said:
Am an new user of this wonderfull phone but am missing the voice recording software that i had with the TytnII phone.
Is there a way of getting this back.
Have the Dutch version of the Touchpro 2
Thanks.
Click to expand...
Click to collapse
I also have the Dutch version of the TP2, I've tried the HTC Voice Recorder:
http://forum.xda-developers.com/showthread.php?t=346298
but sadly it doesn't work for me. It installs perfectly but when you start it, nothing happens. Well, at least I don't know something is happening, maybe it's already recording everything.
Have a look here:
http://forum.xda-developers.com/showthread.php?t=528507
Works great on Rhodium.
Here you are - took me ages to find it too!
http://forum.xda-developers.com/showpost.php?p=3984016&postcount=69
Try the new and free microsoft recite, is amazing!
micolig said:
Try the new and free microsoft recite, is amazing!
Click to expand...
Click to collapse
It's american only! does anyone have a link to this progie? thanks
From Your Computer
Download the installer to your computer, and follow the instructions.
on the download page you get instructions
mic re
http://www.megaupload.com/?d=8T1NMW98
i am not sure, if i broke some rules, or ....
voice recorder
Have been looking for something similar myself adn was directed to noteM elsewhere on this forum.
But then I realised afterwards that there is already a notes app included with the TP2.
As default this is set for written notes but in the menu you can enable a voice recorder function as well.
You don't haave the extra functionality of choosing the recording format etc but the basic app is there for you to use.
Regards
Jon
Can subj record 2-way (incoming+outgoing) conversation during phonecall? HTC HD2 - can NOT (need solution)! What about Omnia II?
try Resco Audio Recorder. i have v4.62 and its works
No need for any additional software. During conversation look at the screen and there is option "record". Just press and it records outgoing and incoming voice.
Vito Audio Notes is a great application for that also, and it records in mp3 format already...
good luck
monsterfly said:
No need for any additional software. During conversation look at the screen and there is option "record". Just press and it records outgoing and incoming voice.
Click to expand...
Click to collapse
yeah thats so cooool!! also it has recorder for conversations off the phone!lol..although i just use that for a scratch pad while playing new ideas on guitar, i think it will record until all storage space on card is filled,,longest i did so far was 35mmins
today I tested Omnia II in shop.
Now I can answer to myself and confirm - 2-way recording POSSIBLE
I tested it with http://forum.xda-developers.com/showthread.php?t=536472
just install it and works fine!
Can
Samsung Omnia II
+
Hacked Sense ROM
+
Two way Call Recording Registry Tweak
Do 2-way call recording as well ???
the ACR (Auto Call recording) is working fine on my OMNIA II
raulito7251: Are you using Sense ROM ?
dwin said:
Can
Samsung Omnia II
+
Hacked Sense ROM
+
Two way Call Recording Registry Tweak
Do 2-way call recording as well ???
Click to expand...
Click to collapse
need test!
Sky Forever:
Please, if you have the device, please help and test it.
many many thanks.
dwin said:
Sky Forever:
Please, if you have the device, please help and test it.
many many thanks.
Click to expand...
Click to collapse
I think it is PROCESSOR issue, not BRAND. I had Acer S200 - NO 2 way! I asked users of Toshiba TG01 - NO 2 way! Registry keys are VERY different in devices. I think, reg changes are for drivers, which are for processors. If processor CAN do it - everythink OK, if not -
What we find out with Hacked Sence ROM? Drivers 100% are OmniaII-drivers, changed only VISUAL EFFECTS.
The only way I think we can do - try to use driver (i think it is wavedev.dll) from, for example, TouchProII. But I don't know, how to take it from TPII and put it to our HD2. I asked people about it, and they said, that this dll is device-related and it will not work on another device. But we can try anywhere.
Sorry my English
http://forum.xda-developers.com/showpost.php?p=6116199&postcount=67
success recording!