I tried this one, but it didn´t work correctly - the conversion-mode was disabled but the sms-notification-sound was also gone.
Any ideas?
rumms said:
I tried this one, but it didn´t work correctly - the conversion-mode was disabled but the sms-notification-sound was also gone.
Any ideas?
Click to expand...
Click to collapse
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM\SMSInboxThreadingDisabled
DWORD
value set to 1
In a registry editor
Or just run the attached .cab file, it makes the same change to the registry.
Apparently it’s best to delete all sms and mms prior to doing the change and then soft reset after the change is made.
I haven’t tried this yet as I have not flashed to 6.1 yet, but the above has been reported as working perfectly
primodious said:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Setting s\OEM\SMSInboxThreadingDisabled
DWORD
value set to 1
In a registry editor
Or just run the attached .cab file, it makes the same change to the registry.
Apparently it’s best to delete all sms and mms prior to doing the change and then soft reset after the change is made.
I haven’t tried this yet as I have not flashed to 6.1 yet, but the above has been reported as working perfectly
Click to expand...
Click to collapse
Thanks, it works very well!
Thanks primodious. The cab works fine...
Glad it all worked ok
Related
I have activated it in the registry and restarted but not being found.
I had to do it twice. After the first edit, I restarted and it worked. Then after another soft reset I lost the edit and had to go in and do it again. Now it's good to go.
Just do it again. It may still be right in the registry, it just need to be opened and closed again. I think that is what my did at least.
hellomoto_25 said:
I had to do it twice. After the first edit, I restarted and it worked. Then after another soft reset I lost the edit and had to go in and do it again. Now it's good to go.
Just do it again. It may still be right in the registry, it just need to be opened and closed again. I think that is what my did at least.
Click to expand...
Click to collapse
Iv done it 500 times.
Let me comfirm it is a DWORD titles IsEnabled in the OBEX DECIMAL VALUE 1. HKLM/software/microsoft/OBEX folder?
Thanks
I also can't find my transferred files - finally I found that the Desktop bluetooth stack I am using (Bluesoleil) is causing the problem as everything works with Widcomm (all the stuff gets to the My Documents folder)...
Bluesoleil tells me that it successfully transferred the file but it went nowhere...
I am trying to change some registry settings to do things such as 'adjust volume settings' 'adjust backlight settings' 'turn bluetooth on and off' etc etc.
I want to use mort script to make the changes but so far I haven't figured out how to make the changes take effect without a soft reset, even when making the changes with a registry editor.
Does anyone know how to do this so that the changes take effect immediately?
Any help appreciated.
two things:
1st: all of the things you mentioned above should work without a reset. the best thing to do is change the reg value manully and if it works with out a reset then you know the problem is in the mort script
2nd: If you know how to edit xml files then download this cab and edit the xml file how you want. this should help some
http://www.megaupload.com/?d=RG6JZC33
this has a lot of apps in it you will be looking for the one that says tweaks
Thanks for the info irus,
Like I said, using a registry editor to change the settings does not take effect until I soft reset.
For example (and i'd appreciate it if someone could test this on their phone) changing the values in HKCU\ControlPanel\Volume...."Volume" and "Ringer" to 0 assuming it is not already set to silent does not actually turn the phone to silent until I soft reset.
Could someone please check this for me and report back.
BTW I'm using a Trinity (HTC P3600) with AX3L's LITE ROM.
Thanks in advance.
I tried it and it did not work, you sould try to edit the xml file in the program i told you about and try it there. when i get done with homework i will try it my self
Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.
fuzzvirus said:
Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.
Click to expand...
Click to collapse
Thanks fuzzvirus but that was my original question.
Does anyone know of a way to do this?
Bump......
I'm also interested in this theme. Does anyone know an answer?
Hi all,
My other half bought a Touch Plus yesterday and I've been adding software to it to make all that much better.
The contacts are stored on the SIM and I've copied them all into Pocket Outlook. I then made the reg tweak to hide the SIM contacts which worked immediately, hiding all the SIM contacts. However, when I soft reset the device (via software or holding down the power button and then re-powering on) the registry value goes back to what it was - showing the SIM contacts!
Is there any way that reg value can be kept to 0?
Cheers
ND
Hi
I have the exact same problem and asked this question previously here, never got a answer
http://forum.xda-developers.com/showthread.php?t=359152
The first thing after a reboot is to hide my SIM contacts... If anyone have a solution it would be very nice.
Kind Regards
I have found a solution...
Download dotfred's excellent TaskManager/Registry Editor from: http://www.dotfred.net/TaskMgr.htm
Copy the exe to wherever you want on your device,
Use the registry editor in there to set the ShowSIM value to 0.
Export that registry value... to \My Documents\HideSIMContacts.reg (for example)
Create a shortcut to the task manager exe in Windows\StartUp.
Edit the properties of that shortcut (I use Resco Explorer) and set the Target as follows:
"<path to task manager>" \My Documents\HideSIMContacts.reg /silent
Make sure you have "'s around the Task Manager path BUT NOT around the path for the reg file.
Reboot...
Bob's your uncle.
I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick
AWESOME...thanks, I have a locked rogers HTC Touch and have tried many different Reg tweaks that would not stick to hide the SIMs in my Contacts, but the NIKI Sim fix above finally got it. Thanks, thank you, thanx again.
nikisimfix
hello !!
Thank you very much for this soft
Thanks guys for the wonderful solution.. I was going bonkers having to delete and add in all my contacts everytime I factory set my Niki. Cheers..
Other solution is RilhasHideSIM, for more see: http://forum.xda-developers.com/showthread.php?t=467147
thanks gfreek this thing worked fine...
Thanks for sharing
Well done and thanks a lot for sharing!
gfreek said:
I had the same issue with my previous Orange UK stock ROM, don’t know why the registry tweak does NOT stick after SR on certain ROM’s :-/ so in the end I resorted to installing the attached cab which fixed the issue
On my current HTCAsia WEE ROM the registry tweak works so no need for the cab fix! Anyway for those with ROM where the registry tweak does NOT work, you can use the fix mentioned here by NinjaDonkey or install the attached cab and soft reset, that should do the trick
Click to expand...
Click to collapse
I downloaded and installed this but it didn't work. What did I do wrong??
tks,works well
Hi,
Everytime I soft reset my HD I have the same crappy WM6.1 keyboard as the default one, is there a way to make Fingerboard2 load automatically upon startup?
Thnx
What you need is a program called SIP Change. Do a search for it here in the forums and that does the trick. I have fingerkeyboard as default on my HD
Here is a link to the thread
http://forum.xda-developers.com/showthread.php?t=271008
Click the link at the bottom of the first post
Or for your convienience
thnx! ill give it a shot
Just so you know; I installed SIP Change but it seemed to cause errors with GWES.EXE on every soft reset. Finally I restored back to pre-SIPchange and the gwes problems haven't reoccurred.
Which delay did you enter in SIP Change?
40 or 50 is recommended.
I don't remember what values I used, but I do recall different delays all causing the same error.
I'm thinking now that perhaps it was caused by me not being quick enough entering the PIN-code for my SIM-card and therefor exceeding the set delay? Maybe I'll give it another try and play around a bit more with the delay.
I try "60" is O.K. Or any?
I have the same issue,
I tried 40, 45, 50, 55, 60, 65, 70 and still not solved
I have the same issue,
I tried 40, 45, 50, 55, 60, 65, 70 and still not solved
I removed Sipchange and tried the solution based on stilus in the following thread:
http://forum.xda-developers.com/showthread.php?t=514960
This solution will really change the imput method according to stilus position but the first time I open the message tool the keybord is still the standard one...
this solution works:
install mortscript
create a script-file in \Windows\Start Up\<any name>.mscr
add this line to your script:
Code:
SetInput("name_of_keyboard")
exact name_of_keyboard can be found under
settings -> personal -> input -> input method
Hi,
I have installed Mortscript and created a file TouchPal.mscr with
SetInput ("TouchPal")
but the problem still remains: the 1st time I want to write the keyboard is still the standard one.
In my Start up I have:
AutoShortcut
CWTimeOut
GAlarm Reload
iLock2
PKG
poulook
sdim
SipInst
TPStartup.exe
TouchPal.mscr
Any conflict?
Faguopal said:
Hi,
I have installed Mortscript and created a file TouchPal.mscr with
SetInput ("TouchPal")
but the problem still remains: the 1st time I want to write the keyboard is still the standard one.
In my Start up I have:
AutoShortcut
CWTimeOut
GAlarm Reload
iLock2
PKG
poulook
sdim
SipInst
TPStartup.exe
TouchPal.mscr
Any conflict?
Click to expand...
Click to collapse
have you uninstalled sipchange.cab?
it seems that sipinst and tpstartup.exe cause the conflict.
set input to any other than touchpal, then run the script manually - what happens?
if you remove sipinst, tpstartup.exe and touchpal.mscr, then reboot, does the touchpal keyoard still work?
if yes copy touchpal.mscr back to start up folder and rename to z_touchpal.mscr to make sure it is loaded as last app.
if no check out which file (sipinst or tpstartup.exe) you really need.
Hi,
Thanks for your help Egoist6.
I tried to remove sipinst, tpstartup.exe and touchpal.mscr then a rebooted and write a message, the keyboard is standard one but if I change to TouPal it will change and work.
I tried to run touchpal.mscr manualy and it changes the keyboard to TouchPal.
I then copied touchpal.mscr back to start up folder and renamed to z_touchpal.mscr, then rebooted but the keyboard is still the standard one
I'm lost ...
could you add
Code:
Message("Script Executed")
to the script (last line) just to check if it is executed properly.
reset.
do you get a popup window during startup?
another idea. add this as the first line. it will wait 5sec before the sip is set
Code:
Sleep(5000)
SIPchange problem
Sipchange changes the keyboard for me at boot, but then crashes instead of closing. So I get the annpying white screen asking to sond information to microsoft. This happens regardless the delay time (tried several values). Any idea?
thanks
maTTeo
mtcerio said:
Sipchange changes the keyboard for me at boot, but then crashes instead of closing. So I get the annpying white screen asking to sond information to microsoft. This happens regardless the delay time (tried several values). Any idea?
thanks
maTTeo
Click to expand...
Click to collapse
uninstall sipchange and try the above script
sipchange is known to run instable
Script with MortScript works with 70 s delay
egoist6 said:
this solution works:
install mortscript
create a script-file in \Windows\Start Up\<any name>.mscr
add this line to your script:
Code:
SetInput("name_of_keyboard")
exact name_of_keyboard can be found under
settings -> personal -> input -> input method
Click to expand...
Click to collapse
Dear egoist6,
your script worked for me, thanks. But I had to increase the delay to 70000 (70 seconds), otherwise no success! So I use:
Code:
Sleep(70000)
SetInput("name_of_keyboard")
Thanks very much for your help!
maTTeo
I used the search funktion and found couple things (Personalizer 2.0 and Op Mon) regardings this.
After a soft reset the operator name changes back to the original.
Is there way to keep the changed operator name even after a soft reset?
I would appreciate a lot, if someone could help.
cheers,
timsah
Hi,
I wanted that myself. I searched and Personalizer works for me perfect. After softreset aswell. No idea why it not working for you. Check windows/start up folder, maybe its not starting after reset.
http://forum.xda-developers.com/showthread.php?t=426673
The reg setting should be in HKCU\Software\HTC\Manila\OperatorName
@artukas613
Thnx for the link, i tried with Personalizer 2.0 and didn't know about 3.1
Now it works even after Reboot.
@Bruce Inman
My ROm is without Manila.
I tried with HKLM/System/State/Phone/CurrentOperater. After a reboot the change is gone.
thanks guys,
timsah
have you tried cookie's home tab editor ? the editor has a simple name change function
Lazy-eye said:
have you tried cookie's home tab editor ? the editor has a simple name change function
Click to expand...
Click to collapse
Hi, thank you for the suggestion, i am using a rom without Manila in combination with Spb Mobile Shell, so no need for co0kie's Home Tab Editor.
Everything works fine with Personalizer 3.1 anyway.