Constant vibration and light when turned on. - 8125, K-JAM, P4300, MDA Vario General

My MDA Vario was working perfectly until one day I noticed it was vibrating non-stop and the camera light was permanently illuminate. The only way I can get it to stop is pull out the battery (the soft reset button won't do anything). When I reconnect the battery and press the on button it just starts vibrating again with the light. Has anybody got any ideas why this might be and what I can do about it?

Don't worry guys.... I've sorted it. I pulled out the battery for about 48 hours and tried again when it allowed me to do a hard reboot which seems to have sorted my problems.

Related

JAM does not turn off after being turned off

If I check in "Settings-System-Power-Advanced-On battery power" to turn my JAM off if it is not used for some time (e.g. 3 minutes), it goes off and then I can not turn it on. I tried to push/hold power button, nothing helped but soft reset. If I turn my JAM off manually by pushing power button I can turn it back on manually too. But after 3 or 4 times it acts just like it was turned off automatically, i.e. iregardless if I push or hold power or any button, LED flashes green and the phone does not turn on. The worst part of it is after I push Power button trying to turn my JAM on and LED indicator starts flashing green (and JAM still remains off) if somebody tries to call me he hears the signal as if my phone is ringing (not busy signal or "The number you dial is not available right now" etc.)
Does anybody know what the problem can be? I've got this problem even after hard reset with no third-party applications installed.
non functioning of on/off switch
Check the connectors of your battery on the inside of the JAM. I had the same problem and I found out that one of the connectors did not really "touch" the battery.
I checked it. The contacts on the battery look like they were scratched by contacts on the phone, so I'd think the connectors are in good contact. I even tried to put a small piece of paper between the battery and phone bodyon the left side to make sure it is really pushed to another side, it did not help either
JAM does not turn on after being turned off
Did anyone ever find out the answer to this??! I have the same problem with mine except it's a bit random - mostly doesn't turn back on again after an auto power off for a long(ish) period of time - like at night.
sounds like a possible fault is occurring. Best thing is to do a full backup of your system and then do a hard reset your device and see if the same thing is still happening. If it is, try the positioning of battery as suggested in earlier posts and if still happening, then a handheld service is required

flash led problem... help me8

since a few days i've been trying to install some software on my wizard to use the led as a flashlight without using the camera mode. Though these applications did not work suddenly for some reasen my led's light turned on and I can't turn it off again. Even after a hard reset the thing is still burning and sucking my battery dry...
Only way i found so far to shut it down is to open the camera program, turn on the led (then it goes brighter) and turn it back off again. After a few seconds it just turns on again tough.
please someone help me!!!???

Backlight dims, power button doesn't work properly...

I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
pdiaz said:
I have had the Touch 3G for nearly a year now and for the last 3 months I have had this recurring problem which is fixed with a hard reset but will recur again after about 6 weeks. The symptoms are:
1. When turning on, the backlight dims just before the HTC flash screen and startup sound (when it says "Smart Mobility")
2. Touching the screen doesn't bring the backlight back on.
3. Pressing the power button doesn't turn the screen off from this dimmed state, but after pressing touching the screen will turn the backlight back on.
4. Pressing the power button again will now turn off the screen, but pressing it again won't turn the screen back on! If I call it from another phone, the vibrator goes on but it doesn't ring, the screen stays off and you can't answer the call. If you hang up on the other phone it keeps vibrating and you need to do a soft reset to stop it.
If I do a hard reset the symptoms are gone and reinstalling the exact same software doesn't cause the problems immediately but withing a month or so it happens again. All I did just prior to these problems was use TomTom a bit more than usual, but otherwise nothing different. I have used TaskManager to see if there is anything weird running in the background but it all looks fine. I have had a cursory look through the registry but also can't find anything?
Any advice would be appreciated.
Click to expand...
Click to collapse
Sounds like it's going all haywire. If you've had it less than a year, I'd send it in real quick. Sounds more like a hardware problem.
I don't think it is hardware as a hard reset fixes it...it just recurs down the track. I have done a hardrest and reinstalled all my apps and it is working great again but I was wondering if I should be checking somewhere in the registry for an aberrant setting. I am u using a backup image program so at least when it happen again I an restore my system more simply.
But then again, all the symptoms you mentioned point to a hardware defect. You could try to find a tweak, but like all electronic devices, it's the luck of the draw. Try emailing HTC and see what they say.

Screen blank on startup! help (resolved)

My x10i hanged when making a call, had to remove the battery.
Now the problem is the damned phone wont startup. I get the vibration from pressing the startbutton and the screen turns on (if tilted you can see the "backlight") but then nothing absolutely nothing happens, dont react on any keypresses after the "startup".
Tried removing battery for extended period but no change phone just wont go any further then
1 vibrating on startpress
2 turning on backlight on screen
any tips help would be apretiated.
after 10 consecutive batteryout and restart the phone magicly started again but seems like serius software errors so will have to reroot

Screen keeps turning off and on + sets brightness to 100

Hey guys,
i have a serious problem, which happens really often lately. like 10 times a day. The screen just turns off sometimes. The touch-functionality is still working. I can feel the fingersensor "unlock" the Zuk Z1, but the screen just stays off. Then i try to press all the buttons and sometimes the screen turns on again. But sometimes it just turns on after some seconds even though I didn't touch it at all.
First I thought that this is a hardware issue, maybe a loose contact. But recently a new problem showed up. The screen brightness just goes up to 100%. I turned off auto-brightness and move the slider. Nothing happens. Restarting always fixes it. But mostly after 1-60 seconds it goes back to normal.
Any ideas what might be the problem? Or what I could try?
I haven't rooted the phone and its the newest CyOS version.
Cheers, Oliver
Perhaps you are using the flipcover with magnetic auto switch off when you close the case?
OlivBlum said:
Hey guys,
i have a serious problem, which happens really often lately. like 10 times a day. The screen just turns off sometimes. The touch-functionality is still working. I can feel the fingersensor "unlock" the Zuk Z1, but the screen just stays off. Then i try to press all the buttons and sometimes the screen turns on again. But sometimes it just turns on after some seconds even though I didn't touch it at all.
First I thought that this is a hardware issue, maybe a loose contact. But recently a new problem showed up. The screen brightness just goes up to 100%. I turned off auto-brightness and move the slider. Nothing happens. Restarting always fixes it. But mostly after 1-60 seconds it goes back to normal.
Any ideas what might be the problem? Or what I could try?
I haven't rooted the phone and its the newest CyOS version.
Cheers, Oliver
Click to expand...
Click to collapse
Thanks for the reply,
I havent thought of that before but it is not the cause of the problem.
1. I have a leather case
2. When I take the phone out of the case the displays stays dark
I just did a factory reset today in the morning and the problem already showed up again. So! annoying!!!! Will send back the device I guess
i have lenovo zuk z1 . actually i am getting a problem in this phone . after locking the phone at every seconds light turn on and get turn off on the display. i saw so much on the setting but i didnt get any setting .
The same problem is being arrising with me..please someone help. what should i do..

Categories

Resources