-Hi guys,
have anyone yet besides me tried to upgrade to a new rom using an 8GB micro sdhc?
when i get into the bootloader with the TITAIMG.NBH on the root of the microsdhc card, it doesn't seem to recognize it even though it shows the 7.6 GB within the OS.
( just in case I'm soft-resetting it with camera and power button being hold.)
ANYONE?
torankusu said:
-Hi guys,
have anyone yet besides me tried to upgrade to a new rom using an 8GB micro sdhc?
when i get into the bootloader with the TITAIMG.NBH on the root of the microsdhc card, it doesn't seem to recognize it even though it shows the 7.6 GB within the OS.
( just in case I'm soft-resetting it with camera and power button being hold.)
ANYONE?
Click to expand...
Click to collapse
Never mind, it seems that sdcard flashing doesn't work on SDHC cards.
torankusu said:
Never mind, it seems that sdcard flashing doesn't work on SDHC cards.
Click to expand...
Click to collapse
did you try No2Chem's NueSPL? I heard some had success with SDHC cards with his.
My A-Data 8GB is just 4GB in the 6800
At least your A-Data 8GB card (Type 4) is recognized as 8GB. Mine is seen as 8GB in XP but onlu 4GB on my XV6800, even though I've installed the Kahuna SDHC Support Kit cab.
Just a side note, be 100% certain it is FAT32 and not the default FAT(16). Otherwise Oli wont recognize the card
cornelious2 said:
did you try No2Chem's NueSPL? I heard some had success with SDHC cards with his.
Click to expand...
Click to collapse
hi Guys,
just tried it and it was a no no. no SDHC support for hardspl at least with my 8 Gigger A-Data sdhc
No dice with Sandisk 8gb sdhc
I tried on my 8gb Sandisk with no luck either. It came formatted with Fat32 from SanDisk - but I didn't try reformatting it yet.
Related
Why my Htc Tytn ( Herm200) not detect my new Microsd Card Sandisk Premier 2Gb??
I use the program Storage Tools, but did not detect the card.....
The Rom i use is Schap's 4.31
Help please.
Kvin said:
Why my Htc Tytn ( Herm200) not detect my new Microsd Card Sandisk Premier 2Gb??
I use the program Storage Tools, but did not detect the card.....
The Rom i use is Schap's 4.31
Help please.
Click to expand...
Click to collapse
I'm using also using a 2Gb microSD card without any issues. Try reformatting your card and check again. It could be a compatibility issue. Do other brands work fine?
check first with a smaller capacity microsd
to ensure slot is working fine
then if its working try to reformat your card if not you probably have a damaged card reader on ur hermes
btw im using 8GB Sandisk microsdhc with official att wm 6.0
Hey guys!
I have a question about flashing with SD-Card:
Do I have to use 1GB/2GB Cards which are none "SDHC" cards?
Or does our Blackstone support High Capacitiy in Bootloader Mode?
greetz
playdo
I flashed mine using the 8GB card that came with the phone. I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Ok, if you did it with the 8GB card then it should work. Thanks
I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Click to expand...
Click to collapse
That's wrong, as far as I know. My old device was a Hermes which I could NOT flash with SDHC cards. But it was also able to read SDHC cards like my 4GB SDHC card.
That's why I asked
i tried with 2 different 8gb cards one of which came with the phone and both didnt work ,
but my 2gb and 16gb both work
AltF4me said:
I flashed mine using the 8GB card that came with the phone. I would of thought as long as the phone can read the memory card you'll be able to flash from it.
Click to expand...
Click to collapse
I can confirm this too - and I nearly always flash my HTC's from the card.
But you need make sure that card is first formatted to the correct FAT (cant remember which now, its in the Wiki), and obviously that the phone can see the card. Then all should work fine!
LoopyLoo
Hello,
I bough a MicroSDHC 4 GB memory card for the prophet, but the only problem is It is not recognizing, some one told me that it is because of the file system of format, my 2 GB micro SD card have FAT format and 4 GB had FAT32 by default, so I reformated it in FAT and still I can't get it working, it's not regognizing.
Well, I saw a thread on web some where saying to download "driver" and install it on the non-supporting MicroSDHC device and it will start recognizing. Is it true?
Please help, if it is possible do tell me some decent way thanks.
FAISAL!!!!!!!
prophet doesnt support sdhc only recognizes sd.....their aint any driver support aswell
I have found this program:
http://www.foro-elrincondedey.com/p...as-tarjetas-sd-hc-funcionen-en-las-pda-2.html
I have instaled on my Qtec, but it doesn't work
Hello all
i have been told that the Snap can handle 2 GB MicroSD maximum?
could you please confirm that since i am buying MicroSD.
Thanks in Advance, great forum
I use a 8 GB San Disk Mobile Ultra MicroSD HC at the moment. No problem!
I believe its up to 8GB, but if it supports SDHC (4+ GB) then it should be able to support 16GB if u find one...
oh2000 said:
I use a 8 GB San Disk Mobile Ultra MicroSD HC at the moment. No problem!
Click to expand...
Click to collapse
hey dude i'm using a microsd hc toshiba 4gb but i cant seem to locate it.. seems like it isn;t compatiable?
Backup All the Data on the card (to PC or similar) and use the format tool on the phone. If anything format the SD card on the PC...
Im more than postitive a 16GB (and anything below) card will work. The phone has specifications for SDHC, which is a "Standard". This standard is meant to work with ALL certified MicroSDHC cards (SD Cards over 4GB are SDCH which is backwards compatible with all regular SD Cards 4GB and below).
Your Toshiba 4GB irwinlee could be locked to a specific device, or improperly formatted.
Hey i got a htc hd2 and i bought a new 32gb sd-card but it my phone doens't read it. I can read it on my pc and i did format it (fat32) and i also format my phone and nothing helped.
Anyone got any solutions?
Any1 that can help me? :/
depends
Guvje said:
Hey i got a htc hd2 and i bought a new 32gb sd-card but it my phone doens't read it. I can read it on my pc and i did format it (fat32) and i also format my phone and nothing helped.
Anyone got any solutions?
Click to expand...
Click to collapse
Hi, what class is your card ?
I have a 32Go class 4 sandisk and it works just fine, some people seem to have problems with class 2 and class 10.
eskargoz said:
Hi, what class is your card ?
I have a 32Go class 4 sandisk and it works just fine, some people seem to have problems with class 2 and class 10.
Click to expand...
Click to collapse
I got a 32GB micro sd HC (dunno what hc stands for i think its the brand) class 4.
Guvje said:
I got a 32GB micro sd HC (dunno what hc stands for i think its the brand) class 4.
Click to expand...
Click to collapse
I had this pb with it after using WP7, I don't know how but changing my bootloader from Maglrd to Clk made it work again on the device.
Try formatting it with SD Formatter 3.1. It solved my problems. Set the options to format type FULL(overwrite) and format size adjustment to on.