I haven't received any text messages since I've done some registry tweaks or maybe its related to the rom upgrade? spoke to cingular support but they were unable to fix it right then and are looking into it.
Anyone else had text issues or have any suggestions on a fix? Any help is
appreciated. I am able to send text messages and they are being received by the recipient.
Thanks!!!.
Are you talking about SMS or EMS/MMS? If you are expecting to receive MMS, then you must configure that account on your Outlook. If it is plain SMS, then you should be receiving them automatically. If not, then something is indeed screwy on your system.
Thanks for replying...It's SMS
Hello, forgive my newbie ignorance please.
I have a new O2 Hermes, which I have flashed to Cingular:
RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship
I have attempted the QWERTY-QWERTZ registry fix, but am not yet successful (no big problem).
What is vexing me is that Messaging will not display incoming SMS -- inbox is always empty, but the Start menu says I have Text Messages Unread.
I am also unable to send SMS -- I press 'SEND' and the message sits in the outbox forever -- no error message. I know my SMS gateway is configured correctly, and I can't see anything else to configure except Unicode support.
I also know my account is set up for SMS because I can put my SIM in a conventional handset and it works in and outbound.
My colleague who has the identical Xda with the identical ROM does not have this problem.
Any ideas?
/PhM
is the inbox for the email or the sms or outlook...etc ?
seems simple but I can't find any other reason, there are a couple of inboxes check to see which one you're currently at you can switch through them,
seeing as it says you have unread messages I assume sms is working fine.
Messages clarification
when I click on the 'Text Messages: 8 unread', the device goes to 'Text Messages'
header is 'Inbox' and 'Received'.
the screen is blank exept for the footer 'Text Messages 0 items.
If I click on 'Inbox', I see the different folders 'MMS' (empty), 'Outlook 'Email' (which has the working outlook stuff), and 'Text Messages', which has 'Inbox' empty and 'Outbox' (1) -- the message that refuses to be sent.
It is bizarre behaviour.
I can't send MMS either; composed and 'sent' but stuck in outbox with an envelope+Xsymbol.... (but MMS is more complicated, and not as important to me)
go to messages,
click on menu/tools options,
what accounts do you have there?
you might need to setup a new text message account although it should be there automatically you might need to change the service number.
Hi Phm,
Sound like your SMS center number is not set right - could be wrong but check it here > Start > Settings > Personal > Phone - On the services tab click 'Voice Mail and Text Messages' > Get Settings. The numbers returned should be those as used by your network...
Gav.
Hi Gavin, Hi Darky.
My Messages:toolsptions has accounts:
* Text Messages
MMS
New Account....
text messages only has option 'unicode y/n'.
settingshone:voicemail/text shows:
Text message service centre: +1 (705) 796-9300
Voice Mail: +1 9604) 418-3471
which are correct for Rogers.
for giggles I retype the SMSc entry.
in PHM regedit (not the same PhM ;-) )
HKEY_CURRENT_USER\Software\Microsoft\SMS contains Datagram, Status and TextShared, all empty.
System\State\Messages contains
OtherEmail\Unread (Count:6)
SMS\Unread (count 8, Text 'Text Messages...'
sync (name activesync, unread count 0)
TotalEmail\Unread (count 6)
Vmail line1,2, total (unread count 0)
HKEY_LOCAL_MACHINE
comm\cellular\SMS\Protocols\Notification
AppName tmail.exe
and a bunch of other parameters
subtlety: some of the entries point to AppName tmail.exe and others point to \Windows\tmail.exe. (explicit path)
Can I assume there's a path similar to old desktop windows?
HKLM\comm\cellular\SMS\Router and Store are empty.
that's all I see in the registry that might be relevant.
HKLM\Services\SMSReciever looks in order.
Next thing I'll try is reflash the system. But that's a bit like trying to start the car with one foot on the ground.
Hi,
In mine I can see and read SMS, but can't send. Today I found the reason is probably that I got a 32kb SIM' card. My operator is sending me a 64kb. 128kb do also exist.
Not sure this can be linked to your issue though...
SIM size and SMS?
Hi Prerna, interesting idea.
what makes it weird is that I was able to send and receive messages with the 'old' O2 flash. SMS broke when I loaded the Cingular flash I am still using my old Rogers SIM (vintage 2003 or so).
Maybe it's time to upgrade.
/PhM
re-flash helps
Well, I spent an hour, downgraded to the original O2 ROM, then upgraded to the Cingular ROM, and now SMS works again.
I have not yet tried to do the registry tweaks to restore the QWERTZ keyboard.
I wonder if maybe I accidentally broke something when I was poking around in the registry.
For now, SMS is working and that's the main thing
/PhM
Prerna said:
Hi,
In mine I can see and read SMS, but can't send. Today I found the reason is probably that I got a 32kb SIM' card. My operator is sending me a 64kb. 128kb do also exist.
Not sure this can be linked to your issue though...
Click to expand...
Click to collapse
I inserted my new SIM some minutes back, and... It works!
I am now able to send SMS.
Hello,
I've an issue like this:
I could send and recived SMS but some SMS don't work (the one who tell me I've a message)
and apparently it's a know issue from my provider ...
just happened to me too. i have removed sim. put in other fone sent and received one sms. put it back in to my hermes and it started to work :S
i had such problem too until i uninstall the sunnysoft vcard software. After that sms goes fine.
Text Message: 6 Unread - but no messages
There are 6 unread text messages on my today screen but when I highlight it to view it, there are no messages to be read. I keep getting text messages and the counter just adds up but there are no messages at all.
Anyone have any ideas how to solve this? Your help is highly appreciated, thanks!
phm said:
Hello, forgive my newbie ignorance please.
I have a new O2 Hermes, which I have flashed to Cingular:
RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship
I have attempted the QWERTY-QWERTZ registry fix, but am not yet successful (no big problem).
What is vexing me is that Messaging will not display incoming SMS -- inbox is always empty, but the Start menu says I have Text Messages Unread.
I am also unable to send SMS -- I press 'SEND' and the message sits in the outbox forever -- no error message. I know my SMS gateway is configured correctly, and I can't see anything else to configure except Unicode support.
I also know my account is set up for SMS because I can put my SIM in a conventional handset and it works in and outbound.
My colleague who has the identical Xda with the identical ROM does not have this problem.
Any ideas?
/PhM
Click to expand...
Click to collapse
Try this O2 settings cab file, it works for my Tytn in the UK , try it and see.
avalon829 said:
There are 6 unread text messages on my today screen but when I highlight it to view it, there are no messages to be read. I keep getting text messages and the counter just adds up but there are no messages at all.
Anyone have any ideas how to solve this? Your help is highly appreciated, thanks!
Click to expand...
Click to collapse
Hi
You can try the following application. It removes spurious unread message count from the today screen and resets it:
http://forum.xda-developers.com/attachment.php?attachmentid=32766&d=1167695488
However - I am curious, is it the case that genuine messages are being received but that you just can't view them?
Mike
I had the same problem when I upgraded to any of the WM6 Roms, some days smses worked and others it would just store the smses in the outbox and if someone sent me a sms my phone display would come on but wouldn't indicate a sms, yet my friend would get a delivery report, so all i did was just downgarde to the latest WM5 Rom and problem solved.
hi im looking for a little exe for wm6 that will display text posted to it as a notification. for example im trying to use message filters to send all text messages containing a certain string to an exe that will display the message as a notification.
if this is possible, could someone either make one or point me in the direction me one.
thankyou in advance.
chris
I have found several threads where people have my problem, but no solutions.
Whenever I receive an MMS message it displays the phone number in the From field instead of the contact name. If I open the message and choose Menu->Show->Message Detail the name shows there. If I reply to an MMS message as an SMS the To: field only shows the phone number, But if I reply to erither an MMS or an SMS as MMS it shows the name!
SMS messages and phone calls both display the names fine. I'm using ArcSoft MMS Composer 5.0.31.7 on WM 6.1.
Thanks in advance for the help (probably something simple I am missing!)
Does anyone have a ROM that they are getting names on MMS messages? Maybe I'll just switch from Storm.
The same problem is on 5.0.31.11. I expect it's a issue from the Arcsoft MMS composer.
Here you can find version .25
http://forum.ppcgeeks.com/showthread.php?p=320846
Perhaps it works with this version. Have not tried it yet.
That version is Verizon only and I'm on AT&T. I'm searching the forums but having a hard time locating a cab for a later version that will work with AT&T.
Do you know if a hack is available to add "unthreaded? text messaging back to the Mogul? Our IT folks have Moguls and just upgraded to 6.1 and they receive text message alerts from their LAN/WAN monitoring program on issues with their customer networks. The threaded messaging is really a pain because it lists all the messages under the same heading?
Anyone have any ideas?
Download Schap's Advance Config Utility and disable the threaded sms.
Thanks
Thank you very much it worked.