Hello folks,
New to the Universal and was just wondering if there are any applications out there that would facilitate one-handed texting via the touch screen. I'm looking for something that creates a virtual Keypad/Numpad of a standard mobile phone on the touch screen to enter text for an SMS - complete with T9 - does such a thing exist or am I dreaming?
The keypad with T9 comes standard with WM5 official ROM, so if you haven't flashed your device and installed any of the independenty developed ROMs, you just have to enable it instead of your on screen keyboard.
Related
Hi, I am a new user to
A) this web site
and
B) this Phone. 5 days so far.....
I dont know if my topic heading is quite correct but I am sure someone will correct me if I am wrong.
This phone seems to have so many names, anyhow, mine is on Orange here in the UK and called a SPV M3100
Right, only thing that gets on my nerves a bit with this phone is there is no
T9 "predictive text input" like I am and have been used to with Nokia phones for the last 7 or so years.
What I mean is, you all know how you write a text message on a Nokia with predictive texting. using just your thumb etc.
What I am after is, is there some software / program I can download that would make the screen like a keypad within the send SMS program. so it is easier to text.
Because unless I am mssing something. The only way to text on the ORANGE version is either with the slide out keypad, or with the virtual keypad and stylus ???
Thank you for reading this and perhaps you can advice me.
To get T9 with a normal style phone looking interface you can install the PhonePad application which is available here on this site (its linked in the Hermes Wiki):
ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
You can also use the Block Recognizer, Onscreen Keyboard, Letter Recognizer, Symbol Pad and Transcriber as well as the slide out keyboard on a standard M3100.. In fact I think the options are the same as any Hermes?
Hello, I have had Wizard for a long time. Some time ago I purchased new O2 XDA Stealth phone (with slide numeric keyboard). There is the possibility to use the numeric keyboard for writing i.e. SMS's quickly when selected SIP eZiText. But there is a bug in eZiText and the support is terrible. So I decided to try to install IntelliPad from HTC to this device. After soft-reset it works normally (it means tapping by fingers to the screen). But do you thing that there is any possibility to make this to work with my hardware keyboard together as well? Somewhere has to be some buttons mapping, but I am not an advanced programmer and do not where.
Or is there any other SIP which could be usable with O2 XDA Stealth instead of eZiText?
kmozis said:
Hello, I have had Wizard for a long time. Some time ago I purchased new O2 XDA Stealth phone (with slide numeric keyboard). There is the possibility to use the numeric keyboard for writing i.e. SMS's quickly when selected SIP eZiText. But there is a bug in eZiText and the support is terrible. So I decided to try to install IntelliPad from HTC to this device. After soft-reset it works normally (it means tapping by fingers to the screen). But do you thing that there is any possibility to make this to work with my hardware keyboard together as well? Somewhere has to be some buttons mapping, but I am not an advanced programmer and do not where.
Or is there any other SIP which could be usable with O2 XDA Stealth instead of eZiText?
Click to expand...
Click to collapse
Please let me know also, I'm having the same issue. Could you let me know where I can find Intellipad from HTC ? Any specific link ?
Thanks
Try this: http://forum.xda-developers.com/showpost.php?p=1062820&postcount=2
but note that this is only software SIP, that will be shown on the screen and does not cooperate with the hardware keyboard :-(
Hi All,
I am a newbie to I have a htc touch. I am trying to install Pocket CM keypad on my phone. I downloaded the .cab file from the website and i copied it to my phone using activesync. When i click on that cab file I just get a message Pocket CM installation unsuccessful.
Please let me how to install it. Also i want to install the contact on my phone
Also can someone suggest which is the best keypad software I can install. Also what is the software I have to install to switch the phone from potrait mode landscape mode and vice versa
Best input soft - EzInput
Screen rotation software - Windows Mobile Settings -> |System| -> Screen -> Landscape or tap screen rotation icon on HTC Home Launcher tab.
Thanks for that input. But that will permanently change the screen to landscape mode. I want it only on need basis. That is why I posted.
Besides In my phone i have two keypads. One is touch keypad and another touch keyboard.
The problem is most of the times when not reqd "touch keyboard" which is qwerty shows up.
When i want to type a message or a document then only "touch keypad" shows up.
This is highly irritating. Can somebody help me how to get around this. I want to use the qwerty keyboard for typing messages and working with doc.
I have been reading in the website that it is possible to have the qwerty keyboard working with messaging or while typing email
Can some body please tell me how to enable/disable the 20 key keypad and enable the touch keyboard when reqd.
Please please post a reply
I tried the work around of setting the registry key. but now i am having other problems when i press the green button the call keypad does not come. I also cannot press the button 1 to rotate the screen.
Now I have changed the registry key back now. Now I am back to square 1. The two key touch keypad appears for messaging or email. But i cant get the qwerty keypad.
Can some one point me to the fix for the same please. so that i can use the touch keyboard for messaging.
Many thanks in advance
Man, try EzInput. It looks better, works better and touch keypad doesn't switch to qwerty in some apps - you can choose which do you want! Touch keypad OR qwerty. I'm using it 'cause this switching freaked me a lot and now it's OK with EzInput
Can you please point me to the ezinput cab file and how to install it please. Many thanks in advance
http://www.sendspace.com/file/as1z9v
This is the one I'm using
Hello!
I have started developing some small apps with Visual Studio 2008 and the Windows Mobile 6.0 SDK using C# for my HTC Touch HD.
Now, I have a problem. I have a numericUpDown-Panel in my app and for this I want to use the numeric inputpanel of the htc phone-keyboard. But when I enabling the input panel, I only get the normal htc phone-keyboard. I know how to switch between the input panels (QWERTY, phone, ...), using the InputPanel-Class, but I don´t know, how to switch between the different panels of the htc phone-keyboard (normal, signs, numeric).
For example, when I create a new contact in the phonebook and I select a field for a phone-number the keyboard switch to the numeric keyboard.
And this is exactly that, I want to use in my app.
Has anybody an idea?
Cheers Michel
Sorry to bump a very old message, but I'm wondering the exact same thing for my HD2...
I've seen other programs do it, but how?!
hi
i am using 826x series 6.5.3 rom on SE xperia x1 with touch input.i tried alot but failed to acknowledge that how to switch between full qwerty keyboard to phone keypad.in wm6.1 we switch by clicking a little arrow beside keyboard icon in middle down of the screen. but how all this hide in wm6.5?
i love virtual phone keypad for tying and messaging but i cant access it ;(