If my memory serves me right, when I had my Blue Angel and wanted to manually connect to GPRS, I could click in the "G" icon in my title bar and I would get the option to connect to the GPRS setting that I had set up.
Now I have a T-Mobile Vario and WM5 - standard build etc..., but when I click that "G" I get the same message bubble titles "connectivity" , but with a message saying "To connect to either the internet or work, set up a new connection in Settings". Using the "connect" button in the SPB GPRS Monitor icon (on the title bar) connects with no worries.
I have tries adding a new connection in - now I have 2 that work perfectly when usign SPB, but not with the "G" icon.
Clicking the "G" icon must read the registry somewhere and look for the current GPRS settings, but I must be missing them.....hmmmm
HKLM/Comm/ConnMgr/Destinations/Providers........ all seems ok, but the "ConnectionGUID" specified in my connections is not found anywhere else in the registry!
Can anyone help?
thanks
Charlie Grillo
I am also facing the same problem .. Cannot get the option to connect appear as in my previous Blue Angel ..
This creates problem for updating my RSS channels using SPB Insight which needs to have some connection in Connectivity bubble ..
Anyone found the solution?
I live in the US and have just bought an o2 Atom Exec. I have T-Mobile as my carrier but my Atom can not keep the signal for more than a few minutes at a time. The configuration Wizard can't help because it doesn't show the US as an option. I try to select T-Mobile but even when I am connected it won't show the name of the network. I am very upset - I spent alot of money on this phone but I can't use it. Can someone please help me configure it to connect to the T-Mobile Network?
I also have T-Mobile (USA) and have used these settings on a I-Mate Jam and now an Atom Life. It took me a while to gather this information, but now everything is working perfect. Here are all the network settings:
Connections: My ISP (Start->Settings->Connections)
Add new modem conection-> name->T-Zones
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
Connections: My ISP (Start->Settings->Connections)
Add new modem conection-> name->PictureMessaging
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
Connections: My Work Network
Set up my Proxy Server: Check both boxes
Proxy Server: 216.155.165.50
Advanced:
HTTP: 216.155.165.50:8080
WAP: 216.155.165.50:9201
Socks: 216.155.165.50:1080
Connections: My Work Network
Add new modem conection-> name->T-Mobile WAP
Cellular line (GPRS)
Access point: wap.voicestream.com
User, Pass., Domain: leave blank
Advanced: no change
This will give you Internet browsing, access to T-Zones (in Internet Explorer the address you need to type is: wsp://wap.myvoicestream.com) and MMS capabilities
For MMS, you also need to set the following:
In Messaging, choose options, then MMS
In the Servers tab, create a new configuration called PictureMessaging
with the following settings:
Gateway: 216.155.165.050
Port: 8080
Server: http://216.155.174.84/servlets/mms
Connect via: My ISP
This should work for any WM device and T-Mobile USA.
Have fun!
You are so cool, frenchygeek. I am very grateful for your reply and all your help. I made all the changes you recommended, except that I can not figure out how to add MMS because in Messaging options MMS is not listed. I can't add it because it requires an email address to add an account. Can you walk me through that?
I also found somewhere in this forum instructions to make a registry entry to change the default network to my local network. Now it no longer comes up trying to run the Wizard (with my default as Austraila with every soft reset. Do you need that information? (I am in my office but once I am home I can send it if you like.)
Anyway, I made some of these changes earlier today and the ones above just 5 minutes ago ... so now I'll see what happens. Thank you SOOOO much.
Susan
[email protected]
Cinamon,
Go to Start->Messaging or Start->Programs->Messaging or click on the Messaging line on the "Today" screen.
When in there, you may have a selection screen with the various messaging options you may have such as Text Message, MMS, Outlook or your corporate or personal email. Click on MMS. If you don't have this screen, then go to the next step.
Click on Menu->Tools->Options
At the screen which says "Tap an account to change settings", click on MMS. You will see 4 tabs (Preferences, Blacklist, Servers, About). Go to the server tab and make the changes that I outlined in my previous post. Accept everything, close and do a soft reset.
Voila!
BTW, yes, I would be interested in the information regarding the change on the register to place T-Mobile as a default provider. I never got around to do that.
Merci beaucoup.
Hi again, FrenchyGeek,
I'm so grateful to you - I have been begging for help from the manufacturer and the distributor but you and the other forum member are the only two sources of help I've had. Seems like someone else would be desparate for this information too.
I'm still not sure about MMS - MMS does not show up in options on my phone. I finally got to the MMS settings screen by going to the messaging screen of one of my email accounts, clicking on GOTO, choosing MMS (it does appear there) and then choosing tools -> options. It is not set up as yours is - I have to fill in :
Active Profile (A dropdown but I choose NEW)
From there I have to fill in
Profile Name:
MMSC: I typed in http://216.155.174.84/servlets/mms
Data Connection: (a drop down and I choose T Mobile)
Gateway: (a drop down with only WAP1.0 Gateway and WAP2.0 Gateway to choose from)
IP Address: (I typed in 216.155.174.84)
Port: (I typed in 8080)
Do you think that will work?
OK, default networkconfiguration:
In the HKCU/AutoConfig/Network, find XPath string n change it to your network operator number. You can see your operator number (5 digits usually - mine was 31026) when you launch autoconfig, next to the "Detected from SIM" text. You can also see the operator number from the DetectNet or NetworkID keys in HKCU/AutoConfig/Network.
I still have trouble with it dropping signal or trying to connect to Australia. I wonder if there is anyway to delete all the overseas configurations so it can't find them again. Also, I drop signal everytime I connect via USB to my PC. Do you have these issues?
Another annoyance - the battery doesn't last long for me at all - I am definitely a power user, which is why I wanted the higher processing speed which lead me to the Atom Exec in the first place. Are there any extended batteries that you're aware of?
Thanks alot!
Susan
Thanks again.
Hello Cinamon,
I am using the new O2 Atom Life and I installed the WM6 ROM upgrade. Are you still on WM5? That may explain the differences, although I'm not sure why the MMS profile doesn't show up on yours.
The screen where you can find this is the first screen that shows up when you click on "Options" in "Messaging". It says "Options" at the top, "Tap an account to change settings" below, with a square containing "New Account...", "Text Messages", "MMS", "Outlook E-Mail", and possibly other accounts if you set them up yourself. Below are two buttons: "Security..." and "Signature...". The only way to properly set up MMS is to click "MMS" on this screen and then follow the procedure in my previous posts.
I also have an "Autoconfigurator" which shows the countries that are supported (Australia, Bahrain, China, etc.) but it doesn't launch automatically. When you go through a hard reset, it asks you if you want to run it, but you have the option to say no. After that, it doesn't come back. If it's in the ROM, I don't think you can delete it.
I don't have any of the problems you outlined. My phone actually works really well, except for one major flaw. I don't get the voicemail notification icon to show up when I have a new voicemail. I only get the missed call icon (if my phone is on). I opened a separate thread on this site but got no help so far. By searching on this site and others, I can tell that some WM phones have such a problem depending on the Tel-Co, but I can't seem to find the solution. Do you have any problem with that feature?
If you Google "O2 Atom battery", you can find after market batteries that actually provide longer charge. They void the warranty, so be careful.
Thanks for the default network configuration! What software do you use to edit the registry?
Take care!
Still No Luck
Hi Frenchygeek,
I have no problem with voicemail (on the few times my phone connects).
I use SKTools for editing the registry. Sometimes I use a freeware register editor which can only be used from your PC - I can send you that if you like. I know alot of people use Commander (also Freeware) but for me these two programs are more friendly, and SKTools has lots of tweaks and other cool utilities.
My phone is the Atom Exec and there is no update at the moment for WM6 so I am stuck with WM5. I can not get my phone to stay connected for more than 5 minutes at a time. It drops the line over and over again and is really unusable (except for games and mp3s etc ... smile ....) I thought I might reset to factory settings and begin again with your instructions but I can't find the option to do a hard reset - do you know how to do that? I am very frustrated as it was expensive and it's useless to me as is. I asked the seller if I could exchange or upgrade it and I'm waiting for his answer. Maybe the Life with WM6 would do the trick. Anyway, I have had no service at all for about 6 hours although I have tried every trick in the book and then some. Are you using code 31026 or are you in a different region in the US? (I am in Virginia)
Thanks again for your help.
Susan
Hey,
To hard reset, you need to press the stylus in the reset hole at the bottom of the phone while you press on the on/off button. Keep it this way until you see a message on the screen, which asks you to confirm the hard reset by pressing the green and red button simultaneously.
I think that it will do the trick. My Atom Life works perfectly fine with T-Mobile. I'm in California and my Tel-Co number is also 31026. It shows up on the Auto Configurator screen ("Detected from SIM: 31026").
If it wasn't for the lack of voicemail notification icon, I would be happy. I'm tempted to reinstall WM5 and see if that makes a difference. But I read that WM6 is so much better than WM5, so I really don't know what to do. Support at O2 basically gave me the finger. They said their phones are intended for the Asian Market...
Anyway, the Atom Life is a more recent phone compared to the Exec. It's a little bigger, but the specs are much better. It's much more expensive though...(I paid a little over $800 for mine).
Have fun!
Hello Again FrenchyGeek,
I did a hard reset and put all the settings in that you gave me, reset the autoconfig to 31026, and things are much better. I still lose signal a few times every hour but it does usually recover quickly, although there are times when I have to manually search for the signal as the phone doesn't do the search itself.
I do need to do something about the battery, however, and will follow your suggestion. I use the phone as an MP3 player and the battery drains in a couple of hours.
It must be frustrating that no one can help you with the voice mail problem. My voicemail notification works perfectly. Wish I could help. If you can think of a way for me to search my registry for the right setting let me know and I'll give it a try.
I still don't understand why the O2 company is not more responsive to us Americans .... it's a big market for them to tap into.
Susan
Hi Cinamon,
Just got an idea for the problem you're experiencing.
Under Start->Settings->Connections, I have a program called Band Switch.
In there you can select your network type: Auto, GSM, UTMS
And you can select your Band: Any, GSM 900, GSM 1800, GSM 1900, UMTS 1900 and UMTS 2100.
If you have such a program, try to play around with the settings and see if it makes a difference. It's possible that you when you lose the signal temporarily the phone gets lost. If you force it to a certain band, then it might be more stable.
I don't know for sure, but it's worth a try.
Cheers
Hi Frencygeek,
I do have such a setting and I have repeatedly set it to 1900 (because that's what T-Mobile operates on) but it continually resets itself to tri-band. I wonder if anyone here can tell me how to make 1900 the default. I notice that it connects to GPRS but I have no phone service - although I can check my email and browse the web. In those cases I have to manually go into settings and tell it to connect to t-zones under my ISP. I think somehow it is defaulting to the YES OPUS settings of Australia everytime it loses signal, and I don't know how to direct it to my settings. Maybe I should try a new thread and see if anyone can help, although it does seem that support for those of us in the Western Hemisphere is sadly lacking.
As for your voice mail, I'm sure this is too obvious to suggest, but have you tried changing the notification type? Maybe a different ringtone or change to vibrate or play with that? Strange that is the one feature that works for me - but I certainly need it since no one can call me at least 50% of the time.
I do own an MDA and if I were not so hard headed I would use that ... but I'm having a hard time giving up as I do like the phone (and did spend $500 on it, although it came with extras like a miniSD card, bluetooth headset, etc.
Hello Cinamon,
Someone else in another thread suggested that I upgrade the Radio Rom to version 2.69.11 or 2.19.11. I have done some research and found that it should work with T-Mobile. The only problem is, I don't know where to find a radio rom that will work with my Atom Life and I don't know how to install it. I have read too many horrors stories about people "bricking" their phone after trying to flash their ROM. So, I'm a little hesitant, but I would do it if someone answer both my questions. Also, I don't know what version of radio rom I have. On WM6, System information looks different. My Radio version says: "AL1-KLNC-2.3.40CT-070424-2. I have no idea what that means.
Which brings me to my other suggestion for your problem. Maybe you could update your radio rom and things might just start working for you. Just a suggestion!
Hmmm .... I'm willing to try ... but how do I find an upgrade for my Radio Rom? I see there is an upgrade for the Atom Exec - in Chinise only. ;->
Any luck with voicemail?
Hi Again,
I have tried the band but still I lose signal much too often and it still takes forever to establish a connection again. Worse, it often shows the E in the top bar, which makes me think I have phone service, only to discover that I have only GPRS and have missed a bunch of calls. I contacted the person I bought it from and asked for an exchange - he does not sell the Life but I offered to pay the difference to upgrade to the Orbit, which has a quad band. I'm still awaiting his reply.
Any luck with your voice mail?
Susan
hi cin,
the o2 atom exec are only tri band gsm. i live in apac and had a similar problem over here when i bought a smartphone in the US. it was because carriers still prefer the lower frequency gsm as a default. coverage for the higher freq was spotty for me even when i forced a freq. check with t mobile
by the way, i have an atom exec and when i am in the US i am on cingular and have no issues with dropping. sorry.
Dear friends,
I'm experiencing the following wired problem with my Sim-unlocked O2 XDA Neo (with original O2 software), which I'm using in Austria with the cell-provider tele.ring.
I've properly configured a new network-connection called "teler.ring GPRS" as described by my provider and it's possible for me to dial-in and connect.
When I start the WM5 IExplorer (or Opera Mobile) the phone dials in with GPRS and everything works fine as I'm able to surf the web.
Well unfortunately all other applications except those two (e.g. email, qmail, fring, skype, spbweather) are not able to use this internet connection - the email application for example tells me that the server cannot be found....
I have the feeling they are not accessing the proper network-connection. Is there any special profile I have to alter (e.g. network connection "ISP" or "O2 GRPS", etc.) with the GPRS settings so that the other applications can access the connection too?
How can I debug in this case to find where the problem could be?
Thanks for your help!
kr Andrew
There are two possible causes:
1) When you created the GPRS connection you did it under 'My ISP' correct?
If in the connections dialog you go to the 'advanced' tab and click 'network selection' you will see two drop-down lists. Make sure 'My ISP' (or whatever group your connection is under) is selected in both.
This way all programs will know to use it.
2) The other possibility is more problematic: some cell providers block traffic on all ports except standard HTTP ones (80, 8080) so any program that uses different ports (probably anything other than a browser) will not work.
You will have to settle this with your cell co.
Thanks for your reply,
add1)
Well I'm not quite sure where to find "My ISP"?
When I've created a new Networkconnection I directly wen to the connections dialog, "the advanced tab" and said "new" in one of the two drop-down lists.
After I've created this new connection, it is available in both of these drop-down boxes. After this, I selected it in both - so that all programs should acutally know how which connection to use.
add2)
I'm in email traffic with my cell provider, but actually - as they even offer email as an option - they actaually told me that the specfic ports (e.g .125 for IMAP) should not be blocked..
3) Is there a kind of network monitor for my PPC where I can read the exact statement of failure (e.g. use ping, or other network instruments)?
4) Is it possible that O2 (that's the software I'm using) has a predefined ports or application block on the device, as they I think are offering something like a gprs-flat?
Thanks for your help!
kr Andrew
I don't have the answer for 3 and 4 (I know there are network tools just can't remember any right now) but I think your problem is in step two.
You created a new group for your connection and this may confuse some programs.
By default, when you open 'Settings->Connections->Connections' on the first tab you should see 'My ISP' in bold and under that a link 'Add new network connection'. You should create your GPRS connection through that link and not in a new group (don't go to advanced).
If it is not there that could be something O2 did with the settings and unfortunately I am not sure how to get it back.
I recently got the HD, but since I live in Canada I figured it wasn't worth it to get a data plan (Can only use EDGE and prices are outrageous). As such, I'm wondering if there are any apps or methods to block data.
I would still want to be able to use wifi for internet and such, but stop EDGE from working. Any help would be much appreciated. Thank you!
Goto the Comm Manager and turn Data Connection off? Don't know what that does to wifi which has a seperate on/off? That failing, could you not disable data from your operator?
what works for me is to set networks for automatic internet access to "company network":
Start - settings - connections tab - connections icon - extended tab - select networks - automatic internet access => set to company network
I have a german device so had to guess english names ... be warned.
if you make the change and try to update weather data you should get an error.
Set it back to your phone provider should make it connect (and charge you) again.
I called my carrier and asked for data transfer to be blocked.
Start - Settings - Connections
Tap the Connections icon
There you might see an entry for your mobile provider - in my case I see
"Vodafone Live"
- Add a new modem
- Edit my proxy server
- Manage existing connections
Tap 'Manage existing connections'
You will see a list of modems (in my case I see 'Vodafone Live')
Tab and hold the modem
Choose delete
Anyone tried MoDaCo's NoData utility?
http://forum.xda-developers.com/showthread.php?t=444541
dwnload tweaks 3.3. There is an option to disable one or al of your data connections.
You need to install compact framework 3.5 first (google it if unsure).