I think the volume is to low during calls. Is there any way to fix that?
In the past I've looked for solutions to this type of problem and have never found anything other than using a headset.
Is it possible that your phone is defective? The reason I ask is that my hearing is poor and I generally have the problem you are describing with pretty much any phone (so generally, I pretty much have to use a headset.) On my Touch Dual this has not been the case and I've yet to use a headset. I do notice that when I call somebody the volume of the ringing sound I hear in the earpiece is low but when the person connects volume is fine . . .
I Don't think its defective. The volume is god mostly but when I'm outdoors or on a bus or other noisy places its difficault to hear the person I speak with.
Well then you've got me. I understand the background noise as I drive an old noisy Explorer but I don't seem to have the problem with this phone - with the Treo 750 I really had it. Sorry
Related
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I get this on full volume in a small room. Turning the volume down a bit usually seems to solve it. I think the mic is pretty sensitive and can get flooded a bit too easily.
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I have used both the Ameo and the Dopod rom on the same device and can conirm that this problem is worse on the Ameo rom
Could other dopod users tell their experiences regarding hands-free calling
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I experienced something similar but only when the caller has a lot of background noise on their end. It's not a consistent problem here so I assume it's not the same issue you're having.
Thanks for the replies - it looks as if the unit is working to spec but that there is a 'built-in' problem when using the phone as a speakerphone. I didn't get this on the spv2000 I replaced with the ameo so wasn't expecting it. Background noise does seem to trigger it - I just tried phoning using the speaker phone to call an answerphone and it worked fine with clear audio at the other end. I think a day or 2 of playing with the volume to minimise the problem is the next step. I'll post back when I can be more definite but would be grateful for any other opinions.
Cheers
BobG
On my U1000 the mic works fine in speakerphone mode. There are no brakeups of voice even while walking mid-traffic. Yes, I have to speak loud but that is expected with background noise over 85db.
However, the speakers do not return sound very loud at all (for a speakerphone). I have to lean way forward and almost put my face on the screen to be able to clearly hear the other side (even in a totally quiet environment).
Would have been great to have had a decent speaker phone, but as it is I'm sticking to my bluetooth headset.
The 2 drawbacks with bluetooth is the answer delay, it takes a good 1 second before the connection is established between the headset and phone. The second thing is the sensitivity of the mic, it picks up everything that goes on around you, and drowns out your voice. I have to move the mic close to my mouth if there is other noises going on around me (but this is most likely a bluetooth headset problem, and not related to the U1000).
OK several calls later and after fiddling about with the volume I've found that the best way for this problem to be overcome is to set the 'in call' volume to its lowest! I've also set the main unit volume to about 40% but that shouldn't really have any effect. It's odd that the best way for the speakerphone to work is on minimum volume - fine for single calls but not much use if I want a few other people to listen in. However this is a very small problem now and the benefits of this device hugely outweigh this small drawback.
hi guys,
just got my new x1. I am familiar with WM and HTC as I have spent almost whole summer playing with Kaiser so x1 is nothing new to me. however, the first thing which i have noticed is that the volume during call in x1 is just too loud although it's set to minimum. Kaiser wasn't that loud. so, the thing is that I am bit of suffering when i need to talk to someone as the volume is too loud and I can hear "beeeeep" in my ear. crap, isn't it?
do you guys by any chance know if there is any way to change the speaker volume while on the call so that it's not as loud as it is now? is there any plugin allowing user to better control the volume of the interlocutor?
any thoughts will be highly appreciated!
Thanks
no ideas? does that mean I am the only one suffering from this issue? :/
during calling just presse up-down hardware button on upside of the x1
in normal operation they set system/ring volume, during phone operation they set the speaker call volume
I have the same problem. I have set the volume to the lowest possible setting yet it is still loud. I would expect the lowest possible setting to be mute.
Is there anyway of getting it so that the volume bar works in a more sensible way?
*bump*
Anything on this? I can't keep my phone on my ear when i'm talking with someone. Have to keep a few cm's distance or my head splits. Call volume is at minimum..
hey there. first post on the forum but i've been reading for a few weeks already and finally bought an Xperia.
Anyway, I have the same problem as you guys: even on the lowest setting, volume is still too loud during a call. I've looked accross the net and didn't find any relevant info on how to solve this does anyone have any idea on how that would be solvable ? registry trick or something ?
thanks in advance
hmmm, my situation is totally different. My X1i volume during call is set to maximum and it's too quiet for me. When I'm outside, on the street I can't hear person hanging on the other side. At home, when it's quiet it's all ok.
My ears are quite good , I've tested them 2 months ago.
If you guys have already tried what webguitar mentions above, then i think you may have a problem with your specific handset
There are a couple of threads in the forum about ways to increase volume ...but I've certainly not seen anything suggesting its too loud
Have been using mine since November and never found the volume to be too high
D-fens said:
hmmm, my situation is totally different. My X1i volume during call is set to maximum and it's too quiet for me. When I'm outside, on the street I can't hear person hanging on the other side. At home, when it's quiet it's all ok.
My ears are quite good , I've tested them 2 months ago.
Click to expand...
Click to collapse
Same here...but using SRS Wow HD i managed to get louder sound.
well, of course i've used the side rocker -_-
it's just that i feel that instead of adjusting between
quiet - - - - - - - - - - loud
it seems more like it adjusts between
normal - - - - - - - - - loud
again, i'm talking about the volume during a call, not for the speaker or the system sound.
it isn't that loud if you are in a noisy environement, but when i'm sitting in the silence of
my room... it just feels loud. i never had such a problem with any previous phones o_o
and various changes in HKCU\ControlPanel\SoundCategories\ doesn't seem to change anything
so i was thinking, maybe there is a "minimum volume value" setting somewhere...
Nocturnal310, D-fens, please do not throw the topic off course
Definitely there IS a issue with the volume being FAR too loud on the lowest setting (this is 20% for me)
I'm embarrassed to talk on the phone in the office, as everyone within five meters hear both sides of my conversation and asks if I'm deaf. I'm not! It's the bloody phone!
Is there a way to set the speaker volume to less than 20% (5% for example)?
heard the call volume is quite low compared to other phones.
i am mostly in noisy environment ...so it mite be a problem for me
any app to boost volume?
well i gotta admit.. the volume for this phone suckz! dont get me wrong.. the phone itself i love! headphone wise its pretty decent though!
I think at the moment we are stuck with it! im sure ive seen a volume booster about but we have to wait till the x10 is rooted!
Not sure if maybe a minor update from sony themselves can make a difference?
Low Volume Solution
I had the same issue.
i just palay a high pitch sound in my phone and all seems to work perfect.
ear peace volume increase a lot .
you can try
the notification sounds are weak as well. it's so low and i can't even hear it. i was at a friend's gathering - home party. had like 10 emails waiting for me and i didn't even hear it. had the phone in my front breast pocket as well!
i've got the same issues the sound in the headphones is lame compared to the nexus one or the magic for example.
Call volume is a real issue. I would encourage everyone to contact SE about it. If enough people complain they can boost the volume in a firmwire update.
Mod edit: not (yet) t&a related, moved to general
yes sony should incresase the in call volume it is very low if you are in traffic it becomes very hard to hear what other person is saying, sony plz solve this problem because X10 is first a phone then they should think about multimedia etc.
When I'm using a wired headset to talk to someone on a call the volume is kinda low, I have it set max but its still pretty low, works fine on speaker or BT. Also the same wired headset works very loud when on a movie or music, just low when on a call.
Any fix to this?
Would like to know this aswell... Impossible to hear what people are saying when using the headset
I too find that headset and speaker volume are low. ( comparison to few other phones )
Cannot hear in a noisy environment.
Tried Volume + but does not seem to help .
I experienced this problem as well. Looks like this is a hardware problem (either the pin or the socket).
Try using a different headset - one without a mic. You sould see a significant gain in volume.
Sent from my GT-I9100 using XDA App
Its a hardware issue, swapped my phone for a new one today and dont have the problem anymore.
The service menu edit doesnt really help at all and the volume gain is minimal.
Anyone else having issues like this should request your carrier or samsung for a replacement. It only happens to a handful of phones.
I assume there are two seperate audio chips, the yamaha one for audio and another for voice calls??
Can anyone confirm?
From Day one i have been trying to get good earphones with Mic for nexus 4
tested out more than 6-7 quality earphones with mic like J6M, Klipsh, etc
but the microphone volume on the other end of call is too less compared to apple ear phones( recently switched from iphone)
I have to keep the mic piece really close to my mouth for a good conversation...
can someone help me here.. the mic on nexus 4 works perfect but when i connect earphones the problem begins... i used mic sensitivity apps to test and they pick very less volume from the connected mic
How do i boost the mic sensitivity on earphones or should i return the phone
Will try with my skullcandy's and revert
spaceguyy said:
From Day one i have been trying to get good earphones with Mic for nexus 4
tested out more than 6-7 quality earphones with mic like J6M, Klipsh, etc
but the microphone volume on the other end of call is too less compared to apple ear phones( recently switched from iphone)
I have to keep the mic piece really close to my mouth for a good conversation...
can someone help me here.. the mic on nexus 4 works perfect but when i connect earphones the problem begins... i used mic sensitivity apps to test and they pick very less volume from the connected mic
How do i boost the mic sensitivity on earphones or should i return the phone
Click to expand...
Click to collapse
I'm having the exact same problem - did you find a fix?
I tried quite a few.. expensive as well as cheap ones. finally i got hold of a cheap ear phone set and the volume to the other end is good to be heard (as I have been reported).. While trying them all, I was calling my friend and asking him.. so thats how I know i picked the best one. However, since it extremely loud.. i kinda have to keep it away from my ear a bit and volume on phone is turned down to minimum.. Plus, due to its sheer loudness, I can hear the buzzing sound.. For the first time i noticed it, i.e.: through these extreme loud ear phones. The other party hears it too. Never heard it while on call directly using the ear piece. Strange.
filthykid said:
I tried quite a few.. expensive as well as cheap ones. finally i got hold of a cheap ear phone set and the volume to the other end is good to be heard (as I have been reported).. While trying them all, I was calling my friend and asking him.. so thats how I know i picked the best one. However, since it extremely loud.. i kinda have to keep it away from my ear a bit and volume on phone is turned down to minimum.. Plus, due to its sheer loudness, I can hear the buzzing sound.. For the first time i noticed it, i.e.: through these extreme loud ear phones. The other party hears it too. Never heard it while on call directly using the ear piece. Strange.
Click to expand...
Click to collapse
Do you mind me asking which brand headphones you are referring too here? I have the same issue.
I bought from a local shop. It was a knock off of beats audio. The sounds it throws is EXTREMELY loud.
Is it just me, or does the OP make very little sense? I'm completely lost at what he's trying to ask.. Something about the mic? or the sound output of the "earbuds"?
No trouble here with any of the wired earbud sets I've tried. Clear as a bell and no buzzing.
If its so Loud for you, what are you not adjusting the volume? Would kinda of make sense to do so...
Or you could upgrade in your tech and get a bluetooth earbud.. I have absolutely no problem with volume levels from my Jawbone; I'm hear clearly and I can hear them just find (even when driving with all windows down, it sounds like they are right next to me yelling)
UberSlackr said:
Is it just me, or does the OP make very little sense? I'm completely lost at what he's trying to ask.. Something about the mic? or the sound output of the "earbuds"?
No trouble here with any of the wired earbud sets I've tried. Clear as a bell and no buzzing.
If its so Loud for you, what are you not adjusting the volume? Would kinda of make sense to do so...
Or you could upgrade in your tech and get a bluetooth earbud.. I have absolutely no problem with volume levels from my Jawbone; I'm hear clearly and I can hear them just find (even when driving with all windows down, it sounds like they are right next to me yelling)
Click to expand...
Click to collapse
Nope, it's you. OP was referring to the mic volume on the headset being low, but in filthykids response, he mentioned that the headphones that solved the quiet mic is also very loud on the earpieces.
Also having the same problem, BTW.