I`ve been having problems with my bluetooth on several ROMs (Touch-IT and an other one by Swots), I couldn't transfer files to / from the device - the cruise and the PC reported an OBEX error. After some digging on the forums, I figured out that it was a registry entry which controls the OBEX service that caused the problem, its located @ HKLM/software/microsoft/obex and called "IsEnabled" (surprisingly...) and in the ROMs abve is set to 0, setting it to 1 fixes the problem. All of the ROMs have a utility called AdvancedConfig which has a control entry for the OBEX service but for some reason it doesn't work and the entry must be set manually.
Hope this helps someone...
fyi. udK's Vega R3 rom had this reg key enabled when i setup bluetooth
Yeah, it`s not in all the ROMs, I`ve seen it only in those mentioned above. uDK worked fine for me on this one.
Related
I am using O2 mini chinese version, and I have upgraded the ROM to 1.11.06 CHT. I just found the problem yesterday when I ask my friend to send a file to me from his IPAQ 4150 by Bluetooth. Then I ask another friend who is using IPAQ 2210 to send the file to me but also show an error message "Unable to connect to device "Pocket_PC"". Could anyone can help me about this problem? Thanks.
P.S. I can send file to all other PPC but only can receive file from O2 mini only.
i think i have a solution for you,
goto settings > connectoins> beam
select the checkbox there,
this checkbox is not only for Irda but also BT.
goodluck
Thanks for your answer, but I have tick that checkbox already. It is not only my Mini, I have tested 3 O2 mini (2 are using old rom and 1 is using new rom) and all of them have the same problem. Is there any way that I can enable the OBEX for receiving files in Mini? or any Bluetooth software can fix the problem?
Honestly, the MS BT stack is really....... :evil:
Hi there,
Problem with OBEX on MS Stack...use the file attached and after u install select the option "OBEX ON" Rest is self explanatory.U can then receive via BT from any phone.
Do not work on my iPaq. Still can't receive files. Vista (and other cell phones) says my device is unable to process that file (in translation).
Hi,
im able to receive items by bluetooth from anyone but i cant seem to send anything. Everytime i try to send, is says sending then after about a second it comes back failed. Ive tried pairing or without pairing and i get the same result. Anyone else had this problem and managed to fix it?
ROM Version : 1.5.4.2 WWE
Radio Version : 01.09.10
Protocol Version : 4.0.13.20
ExtROM Version : 1.5.4.102
Can someone help me on this problem please? I just cant understand why it wont send. If it helps i have hard reset the phone and reinstalled with coporate install and MMS only, none of the other rubbish.
Under Settings-Connection-Beam there has to be a check.
Does yours have a check?
I also heard that some providers, not sure if it was TMobile, O2 or Imate have OBEX File transfer disabled in the rom and you have to edit the registry to enable it
Hey,
that setting is just for receiving infrared. Im not sure if it used to work when i got it which is a pain as i dont know if it doing the hard reset thats done it. This might be the problem, in my bluetooth list there is no outgoing port option, any ideas?
Yeah, that's true. Qtec rom have disabled OBEX file transfer in registry, and I couln't send/receive files via bluetooth. The registry key is: HKLM\Software\Microsoft\Obex\IsEnabled, and if it has value of 0, than change to 1.
dddrko said:
Yeah, that's true. Qtec rom have disabled OBEX file transfer in registry, and I couln't send/receive files via bluetooth. The registry key is: HKLM\Software\Microsoft\Obex\IsEnabled, and if it has value of 0, than change to 1.
Click to expand...
Click to collapse
Thanks for the info...
I tried that
I have checked for the "tick" in the box which I have
I have also check the Obex file in the registry which is already set to a "1"
Still no joy.
Is there a way that I can just reinstall the bluetooth via a jar file?
Thanks.
Adam.
Hi,
I have a MDA Compact II device and a Spectec SDW-820 WiFi card. The WiFi card doesn't work with my device although I installed the driver for Windows Mobile 5.0.
Now I saw in this forum that the MDA Compact II device is missing one or two dll files and a registry entry.
Now I ask you what files are missing and what does I have to insert in the registry?
Ironically, you saw the posts in the forum and yet you do not know the full status? The missing files and registry method does not seems to work.
http://forum.xda-developers.com/viewtopic.php?p=235076#235076
Look at the link from 'funkus', none of the method they tried actually work. They are waiting for updates from T-Mobile.
No joy with the file and reg settings. The problem with this is that the MDA Compact II is not rebranded (sold) under any other name so there is no alturnative source for there reg settings and file [EDIT: Dopod 818 pro may be the answer]I have tried files and reg setting from varous machines but nothing seems to solve the issue (probably beacuse there are device specific).
EDIT: The files used in the first reg/file method were incorrect, persuing method again with correct files from the Dopod 818 pro (see link)
I assume that the files only exist on the device untill the customisation takes place, then the t-mobile rom borks them, so logically if you can prevent the customisation, you can use wifi without problems.
EDIT: Files are still absent but flashing device with Dopod 818 pro os seems to restore some comm manager program and some important dll files.
See Here for my latest attempt at a fix, i seem to be getting alot of help
http://forum.xda-developers.com/viewtopic.php?t=42144&highlight=
I just really need to know exactly what is in the t-mobile rom, im worried that ill end up missing out on something. also if i unlock my Compact II will it allow the officil t-mobile rom to load again?
EDIT: It does, just be carful and use CID Unlock before you flash and the official T-Mobile exe prodction rom works fine....restored perfectly.
fUNKUS
(i wish they hadnt broken it in the fist place!!!!)
It seems that the charmer (compact II) and WM5 uses a different SDIO solution than the compact itself.
it doesnt use the files and reg used in the other thread, it uses three files called 'HSDcard.dll, SDBus.dll and OMAP850_SDHC.dll' which apparently is not the bsquare solution that the compact/WM2003SE uses, but the MSFT solution now used by charmer/WM5.
I wasn't given any other info than that, but maybe the files from the Prophet devices may hold some more hope than the other windows mobile 5 devices?
HTC also state that the only ones they claim to work are the following:
Sandisk-SDWSDB-256
Socket 802.11b SDIO WLAN Card
SyCHIP-WLAN6060SDX
and apparently they work on the AKU 1.1.2 and AKU 2 roms
rhedgehog wrote:
HTC also state that the only ones they claim to work are the following:
Click to expand...
Click to collapse
wow where did you hear that! HTC dont often state much about anything!
do you have a link?
we just got the scandisk card working on the charmer btw: http://forum.xda-developers.com/viewtopic.php?t=42144&postdays=0&postorder=asc&start=50[/url]
I am able to send files, but when browsing for services on my Prophet I seem to miss the FTP or OBEX bluetooth options.. Anyone having the same problem ?
Config : Qtek S200 with PDAMobiz_Prophet_WM5AKU3.2_v3231.exe
ROM: 2.26.10.2 WWE
Radio: 02.47.21
pkrielen said:
Config : Qtek S200 with PDAMobiz_Prophet_WM5AKU3.2_v3231.exe
ROM: 2.26.10.2 WWE
Radio: 02.47.21
Click to expand...
Click to collapse
Do you have the same problems with the correct ROM that came with your PocketPC ? I seriously advise people for not reporting issues with non official ROMS.
Spatzm said:
Do you have the same problems with the correct ROM that came with your PocketPC ? I seriously advise people for not reporting issues with non official ROMS.
Click to expand...
Click to collapse
I seriously think that this is THE place to report results of the non-official roms. If I would use the official ROM , I would just bring the phone back to the shop and let them fix it ...
Hmm, I have tried multiple roms and didn't have any problems receiving files.
I just send something to my device and something pops-up if I want to accept the file yes/no. Didn't need to set anything up, just make the device discoverable.
But I'm only sending from other phones or a computer with the standard MS bluetooth stuff installed. Perhaps it could be different with other drivers?
Hallo, I have the same problem. I use a bleutooth dongle and windows xp installed somer driver. It lacks the OBEX option. I can not find the software that came with the dongle. Maybe you have the samen problem???
How are you trying to send a file? I never had to set anything with OBEX or other options when sending via the MS bluetooth driver. (which is: go the systray where there is the bluetooth icon, right-click on the icon, send file. Then search for device, select the file to send and voila, it sends).
Or does it say after that it cannot send because the device is missing a service?
When I search for services on my device it only has the DUN service available, nothing else. Yet it receives files just as it should.
try this...
go to settings - connections - beam , make sure you enable the "Receive all incoming beams" then try back sending files using your bluetooth ..
Make sure you have the following RegKey enabled to recieve files over BT from your device:
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?
Anyone has some idea?