When i pair my phone to my bluetooth car radio i get handsfree and bluetooth stereo working. when i turn off the radio and put it back on, the handsfree function is still available but no more bluetooth stereo.... si when i want to listen to my mp3's on the phone, i have to pair it each time again.
i work with the standard shipped rom and i got the options in the comm manager set to "handsfree" and "bluetooth stereo"
any help would be appreciated!
Ok, found the solution....
it seems if you go to bluetooth settings, press long on the paired device, it brings up a menu where you can "set as wireless stereo". in that way it stays as handsfree and wireless stereo!
Related
i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
Hi! I need an help from you! Do you Know a tricks, shortcut or software that directly start up the bluetooth earphone like wireless stereo device? I each time would like play music via bluetooth must activate the bluetooth, go to comm manager, bluetooth settings, device, tap&hold on the device and tap setup wireless stereo!
Tnx
Stefano
isnt there anyone?
Well on my BlueAnt X5 buletooth stereo headset I just turn on the head set and then press the power button again and it automatically connects straight up. Maybe u have a connect button somewhere on your headset too.
Of course this is after setting up the pairing when I first bought it... and with bluetooth swithed on.
I've got a BT stereo headset (HTC S100) and also BT in my car (Ford). I'm not trying to use them simultaneously (no point), I just want the headset to work properly when I'm using that and then when I get in my car I want the Tytn to connect to my car BT and to work properly with that. At the moment if I want to use my headset I have to go into BT settings and untick "Handsfree" for the car BT device and soft-reset, then I have to do some tinkering on the headset and make a phonecall before it will kick in and behave. Then when I want to use it in my car I have to DELETE the headset from my BT devices (unticking the boxes is not enough), check the "Handsfree" option under the Ford BT device and then soft-reset before it will work.
Why the hell can't the phone just use the headset properly when that's on and connected and then when I'm in the car use the Ford BT properly? Why does having two devices configured interfere with eachother when they're not actually being used simultaneously?!! It's ridiculous, I reckon it's the MS BT stack, what a load of $hite!
Any ideas what I can do? I've tried the JETware handsfree extension, has made no difference.
Hi,
it's easy to find a bluetooth toggle button out there to put it on the HD2 homescreen - neverthelees it only turns bluetooth on (or off). Normally I use only one bluetooth connection - my stereo headset. Is there anything I can do that the toggle button not only turns on the bluetooth but uses my headset as standard connection, so automatically connects to it with some settings?
Thanks,
DW!
Nobody?
If you are having an issue with the headset only connecting as handsfree when you turn bluetooth on there is an option in the settings to have stereo headsets connect to both handsfree and headset at the same time ...
It would be in the bluetooth settings under that devices main properties ...
I use one and it connects to both when toggling bluetooth on or off ...
But even without that all you have to do normally is hit a "media" button on the headset , something other than talk/play or volume, and it should connect ...
Hope that confusing mess helps ....