Related
I have seen numerous posts on this and alot of depressed people trying to get VOIP working with 3G on their trinity, after alot of forum reading and testing I have found a bulletproof solution. It lets you configure your SIP settings, you can make calls and receive calls and hear and people can hear you over wifi and 3G. However, I cannot get incoming calls to ring at all when using 3G only (it works with WIFI flawlessly). So basically unfortunately VOIP as it is now with wm6 only lets you make VOIP over 3G (you cannot receive calls as it just doesnt ring, I suspect it is a firewall issue as over wifi it doesnt ring till I open up ports on my router).
First install the first VOIP file, it has sip config built it. YAY lol
Now you need a cab extractor program like wince manager, which you can download for free [SIZE=-1]www.ocpsoftware.com/products.php?nm=cecabmgr
Now extract the rtc.dll file in the second cab I have attached and copy it to your windows folder and overwrite the one currently there. Without the dll file VOIP works but u cannot hear anything when the other party talks. Once you overwrite this dll, and u have to use Resco file explorer or similar, then VOIP works 100%. Ofcourse you have to run sipconfig, and enable VOIP over 3g and put in your SIP settings
Thats it. Pretty easy fix right
[/SIZE]
tks
Thanks my friend.
Nadavi
Thanks firstly
The second cab isnt containing any dll
Dear mcq3000
Can you share with us which VoIP provider you tested this method with, and can you post your dialplan?
Thanks
I did everything that is described in this thread.
On the today-screen it says my accountname and available. But how can I make a voipcall then?
I use MUNs 2.01 TE ROM.
ulischultz said:
I did everything that is described in this thread.
On the today-screen it says my accountname and available. But how can I make a voipcall then?
I use MUNs 2.01 TE ROM.
Click to expand...
Click to collapse
Just click once on the today plugin and "available" will change to "selected"
Then make a call as usual and you'll see your voip network name instead of the gsm carrier.
Thanks!
I reinstalled the files from above now, and now it only says on the today-screen:
"Internet Calling: No Service"
It seems, that voip does not connect at all now.
When I click on this line, it opens the Internet Calling settings page of the phone.
where is the interest of VoIP over 3G ? i think about cost ...
how many data is used for a conversation with VoIP over 3G ?
extenue said:
where is the interest of VoIP over 3G ? i think about cost ...
how many data is used for a conversation with VoIP over 3G ?
Click to expand...
Click to collapse
In Saudi Arabia, you can get unlimited HSDPA for 100 dollars per month.
Why I can't find any dll inside the wm5voip.cab ?
with skypho.net it doesn't work, it tells me "Skypho:no service", and if I make a phone call him it activates the gsm Does someone succeed us?
the rtc.dll was not cancelled but I has glued him above, this ok?
thanks for any suggestion
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
mcq3000 said:
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
Click to expand...
Click to collapse
in fact I have used wince cab manager,
can be that with Skypho.net it has in anymore this configuration stun?
Dominio voip.eutelia.it
Sip Proxy Server voip.eutelia.it
Sip Proxy Socket 5060
Stun Server stun.voip.eutelia.it
Stun Server Socket 3478
also tried with Stun but nothing.
and also activated the door 5060 from the register on 1 in voip sip.
Do I have to change telephone manager?
thanks still
alishankiti said:
In Saudi Arabia, you can get unlimited HSDPA for 100 dollars per month.
Click to expand...
Click to collapse
I've got unlimited HSDPA for 7 euros / month In the Netherlands
Floriz said:
I've got unlimited HSDPA for 7 euros / month In the Netherlands
Click to expand...
Click to collapse
Hotdiggididaaaaaaaam! That is pretty cheap!
mcq3000 said:
I have seen numerous posts on this and alot of depressed people trying to get VOIP working with 3G on their trinity, after alot of forum reading and testing I have found a bulletproof solution. It lets you configure your SIP settings, you can make calls and receive calls and hear and people can hear you over wifi and 3G. However, I cannot get incoming calls to ring at all when using 3G only (it works with WIFI flawlessly). So basically unfortunately VOIP as it is now with wm6 only lets you make VOIP over 3G (you cannot receive calls as it just doesnt ring, I suspect it is a firewall issue as over wifi it doesnt ring till I open up ports on my router).
First install the first VOIP file, it has sip config built it. YAY lol
Now you need a cab extractor program like wince manager, which you can download for free [SIZE=-1]www.ocpsoftware.com/products.php?nm=cecabmgr
Now extract the rtc.dll file in the second cab I have attached and copy it to your windows folder and overwrite the one currently there. Without the dll file VOIP works but u cannot hear anything when the other party talks. Once you overwrite this dll, and u have to use Resco file explorer or similar, then VOIP works 100%. Ofcourse you have to run sipconfig, and enable VOIP over 3g and put in your SIP settings
Thats it. Pretty easy fix right
[/SIZE]
Click to expand...
Click to collapse
Sorry - just looking for solid confirmation - been tearing my hair out to get this working. I install the VM VI Black VOIP & Config.CAB on my phone and replace the rtcdll.dll file once extracted from WM6VoIP.CAB using resco explorer. when you refer to fist and second files - it's better to specify file names to be sure we're all singing from the same songsheet!
mcq3000 said:
to open the cab and extract the file you need to use wince cab manager program. You cannot just open cab with winrar to see contents, those arent the real file contents. Get Wince cab manager and install it and open cab with that program and you will see dll and you can extract dll.
Click to expand...
Click to collapse
Thank you, I did use winrar
OK I did anything well, I can make a call, am heard speak but I cant hear what the recipent says. On other tries I hear him for 1 second. I also have too much noise on the speaker. While on the other side the recipient hear clearly
Could somebody post the rtc.dll from the WM6VoiP.cab???
I don't know how to extract this...
Thanks!
ulischultz said:
Could somebody post the rtc.dll from the WM6VoiP.cab???
I don't know how to extract this...
Thanks!
Click to expand...
Click to collapse
Here it is. As for me, this solution only worked for one call, then no cigar after that.
I was not sure where to post this and who would find this usefull. I hope that the Mods will either place this post where it Belongs or merge the threads.
[APR. 10, 2009] T-Mobile Hotspot Login 2.6.1 (U.S.A) Now works with Starbucks!!
I was browsing through the T-Mobile website and found an update for ATLAS (aka WING).
As some of you may know (those who have the T-Mobile total internet package); You were once able to walk into any STARBUCKS and log into it as a T-Mobile HotSpot and get free WiFi. Then they decided to use ATT as their WiFi provider leaving us T-Mo customers very confused... at least I was.
The fact of the matter is that you can still use your T-Mo login at STARBUCKS and everywhere there used to be a T-Mo HotSpot and now ATT. You just have to log in as a roamer.
Now, You can use tis cab to bypass PIE and connect quicker without wasting so much time.
After trying to install it on my MDA (Wizard) I realized that it would not install on 6.1 (got a message that it was not a supported device)
So I decided to experiment.
I made a new cab out of the packages (it was a cab with 2 cabs inside it all of which were platform dependent)
Now it should work on all ppc devices and maybe smartphone too.
WHAT YOU NEED:
T-Mobile HotSpot Login ID and Passcode
Download the cab from this post: http://forum.xda-developers.com/showthread.php?t=502674
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
mate, u can just ask the mods to change the title of the other topic....
AirwolfUK said:
I wanted to bring this workaround into its own thread to make sure that people see the great solution posted by c0rnholio -
http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35
I can confirm that it works and works well despite some initial installation issues.
Click to expand...
Click to collapse
Thanks for your workaround and I managed to get my BB Connect working on my Touch Pro 2 and I am using BIS.
Blackberry Connect is Working on HTC TouchPro2
Dear All,
Rejoice HTC TouchPro2 owners. Blackberry connect for working on HTC Touchpro 2 now. Just follow http://forum.xda-developers.com/showpost.php?p=4150074&postcount=35 this web-link and you will achieve your intentions.
Can't get it working for long on mine
I have followed the instructions given in the link, and can get BBConnect 106 to work on my TP2, but only for a while ...
The BBConnect 106 loads, I get BES connection, email, contacts, calendar, notes and tasks downloaded ... manage to send and receive a few email, then it all stop ... with some very strange behaviour.
I have tried everything I can think of to get it working consistently, but can't manage it. I get the impression that the BBConnect is being loaded some place where it should be ... not very technical I know, but thats the way it appears.
The TP2 I have is a Hong Kong English Language version ... WWE ... not sure if that makes a difference.
ROM and Radio version ...
The version I have on my TP2 are
ROM 1.19.721.3 (51489) WWE
Radio: 3.44.25.27
And to correct my typo in the previous note, I think the BBConnect is being loaded shmewhere it shouldn't be loaded, which is causing other features and functions of the phone to mis-behave ... as an example, I was unable to search for new networks manually ... lost the Roaming flag on the top of the screen (small triangle sign), was always displaying GPRS connection, even when not connected to the network (so E (edge), or G being displayed ...)
I also tried version 104 of the BBconnect, just to see if it was version 106 specific, but this didn't make a difference.
Apart from that, the phone is close to perfect, for me at least ... particularly like the way the screen blanks when you are making a call and put it close to your ear, then comes alive again when you move it away so you can see it and access it. With the TP, I was always putting calls on hold when I put the phone to my ear ... also like the way the speaker phone is activated automatically when you place the phone face down.
Now if I could only get BBConnect to work, it would be perfect
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
HeavyComponent said:
Question!
Why use BBConnect for emails? What's wrong with the way the emails are already on the HTC? What is the difference exactly?
Just curious because this sounds interesting.
Click to expand...
Click to collapse
My company disables sync with Exchange and I can only get work email with Blackberry service. I think it's a common problem.
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
BB CONNECT Messenger?
Can BB Messenger be used with BB Connect?
Windows Mobile 6.5 and BlackBerry Connect
Guys, I would like to hear from someone who understands the 6.6 environment whether you think upgrading into WM 6.5 will allow me to still use the BBerry Connect. has anybody tried upgrading a Rhodium and then try the BBerry?
Quophi said:
Yipee mine works too . only problem is sometimes the BB connect tells me radio blocked or in use especially when i use MSN chat or go online with another application on the phone. is there any option i need to tweak ?
Click to expand...
Click to collapse
rsacipher said:
I did get it working, I couldn't get SetModelID.exe to run with the reg string, I have Memmaid that allows you to set programs to run and I put SetModelID.exe in there and I have email!
Click to expand...
Click to collapse
RSACIPHER: I had same problem. could not change Model ID. What is Memmaid and how did that work?
Also
C0RNHOLIO: maybe you should look into why this is happening so that your solution works all the time. Mine is a T-Mobile Rhodium.
Thanks to both
And what about a HTC Rhodium with WM 6.5? Try it but didn't get it.
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
AirwolfUK said:
Running the latest NRGZ28 6.5 ROM with manilla 2.5 and BBC works fine
Click to expand...
Click to collapse
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have been running BB on my TP2 on 6.1, 6.5 and 6.51 roms with Sense 2.1 and 2.5. They all work, and no, I cannot have multiple data streams so when I use the browser my BB connect shows no connection. If I disconnect data, sometimes BB automatically connects but generally I have to run BB connect, disconnect and reconnect (so I added a shortcut to it on my programs).
For me, using 6.51 and 2.1 gives the least trouble. I dont know why.
BTW I keep getting reminders that there is a new BB Desktop update (5.01).
good idea on adding the shortcut. I have found that it rarely reconnects and I had to turn off the auto update for the weather or I would start missing emails. I hope someone gets a fix for this soon as this is the perfect email phone...
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
I have two streams (BB & Contract Internet) running at the same time.
I am on UK Vodafone contract so that probably makes a difference
mumboender said:
Are you able to have multiple data streams? Or does Blackberry Connect shutdown when another data stream is present and you have to restart it? I can't seem to get multiple data streams to function on any ROM even with some of the old tricks from the 8525 and Raphael....
Click to expand...
Click to collapse
Having concurrent connections two 2 APNs simulatiously only works for GPRS (as far as I have observed on all my past and current devices).
So if you want to have BBC and Internet at the same time you need to switch to GPRS only and disable auto band switching for 3G. If anyone knows a way to get concurrent connections working on 3G, please post how.
EDIT: The infos in the follwing post should do the job:
http://forum.xda-developers.com/showpost.php?p=2382465&postcount=37
If I want to be able to download and install Telenav from T-Mobile's wap site do I need to go back to the original ROM that came with my phone or is there another way to make this work? Right now I get an error message about my phone not being comaptible or something to that effect.
I am using the Fusion ROM and have been completely away from WM phones for a long time. Glad to be back but I can't give up my BlackBerry until everything works like it does...reliably!
Do you mean using the 5.99 T-Zones to get online? That's what I'm doing now just fine no problems. And even if you can't get Telenav to work there are plenty of other good programs like iGo, Tomtom, and Garmin.
I am referring to actually accessing T-Zones itself to download from T-Mobile's service/software offerings. I only want Telenav but that appears to be the only way to get it...I wish I could save it as a cab when downloading from the original ROM then open it up and install on this ROM...
Would that be possible?
pinhead said:
I am referring to actually accessing T-Zones itself to download from T-Mobile's service/software offerings. I only want Telenav but that appears to be the only way to get it...I wish I could save it as a cab when downloading from the original ROM then open it up and install on this ROM...
Would that be possible?
Click to expand...
Click to collapse
If you have a t-mobile account you can log into your online manager and use the help to configure the T-Zones. Or you can call T-Mobile customer support and they will walk you through it.
NEW IMPROVED CABS : POST 3
A very Special Thanks to tucahara, Schap, Jaap de Wolf, Dridder
Note : For HTC devices only, please read 2nd post -below-for non HTC devices.
- 3G, WLan, GPRS Capable
- GPS Works
- Recent Drivers
- Updated Registry
- All Major Codec compatible[ a-law, u-law, GSM ask provider to enable ]
- Integrated with Phone and address Book
- VOIP and Carrier sellectable on today screen
- SIP Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- Dial Plan Tool [ Start Menu WM6.5 or Start Menu-Programes Wm6.1 ]
- NAT Enabled
- Echo Canceller
- For WM6.1 and WM6.5
- Tested and working on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K], Xperia X2
- No sound from earpiece ( Please install cab from previous thread but that is only for HTC devices )
INSTALL ON FRESH OS and PLEASE POST YOUR RESULTS GOOD OR BAD. Thanks
THERE IS NOTHING WRONG WITH THESE CABS, SO PLEASE DO NOT COMPLAIN ABOUT CABS. IF THESE CABS WONT WORK, PLEASE READ DIFFERENT POSTS IN XDA AND FIND OUT WHY. MOST COMMON REASON IS DEVICE OR OS NOT SUPPORTRD MEANING DEVICE DOESNT HAVE FILES NEEDED FOR THESE CABS TO WORK.
These cabs are tested, working with different providers-devices and are not for noobs, if you have come across this before, you will find out, these cabs are the best among them.
Outdated Cabs HERE
For non HTC devices, do the following
- Install one of the cabs post 3 matching your OS.
- Fill all required information in setup voip.
- When you try to save you will get a error
- Close it and Run your GPS program.
- Your GPS with get a lock in few minutes as normal.
- Once you find out your GPS program can see satellites, close it.
- Copy and paste dnsapi.dll into your windows folder
- Restart your device and you will have your gps and voip/sip working
- Make sure to fill information in setupvoip again
New improved cabs
New improved cabs with changed dll. Note : Only for HTC devices. For other non HTC devices, please refer post 2 along with these cabs for optimum results.
Reserved for future2
Reserved for future3
Reserved for future4
Calls hang up immediately after being answered
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
nickdo said:
Voip calls hang up immediately after being answered. No matter which direction.
(Using Omnia 2, WM 6.5)
Any ideas?
Click to expand...
Click to collapse
Samsung WM6.5 drivers not compatible with dlls. Please look at outdated cabs link above and go to last page for omnia solution. It works fine on my omnia with Wm6.1. I have tried on WM6.5 on Omnia with same results as yours.
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
nickdo said:
So the only possible solution for Omnia 2 is to downgrade to WM 6.1?
Click to expand...
Click to collapse
you are right
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
That is not right. I have an Omnia 2 i8000 windows mobile 6.5 and I am able to use voip on my phone.It works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. AutoAudioRoute V2.0
4. Copy paste dll in windows folder.
My PDA is i8000NXXJJ1
jukefox said:
Hi dhillonbros,
thanks for your new cabs. But now I am even not able to setup my SIP configurartion with Windows Mobile 6.1 on my Omnia II (as you know it is exactly the same ROM you have).
When trying to save the settings I always get the error message you can see in my attachments. What is going wrong here?
At least storing the settings worked for me with the latest outdated cab for WM 6.1. Do you think you can provide a fix?
Click to expand...
Click to collapse
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
bbuhas said:
that is not right. I have an omnia 2 i8000 windows mobile 6.5 and i am able to use voip on my phone.it works great )!
1. Don't forget to follow the instructions from .txt file
2. I instaled portgo m
3. Autoaudioroute v2.0
4. Copy paste dll in windows folder.
My pda is i8000nxxjj1
Click to expand...
Click to collapse
----------------------------------------------------------
this is not the integrated solution sir. Thanks for time.
----------------------------------------------------------
dhillonbros said:
Add this file in your windows folder. Thanks
Attached: dnsapi.dll
Click to expand...
Click to collapse
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
jukefox said:
OK. Thanks a lot. Settings could have been applied now. But the error after submitting a call is still the same that I had before with the previous cab version.
See the message from the attached screenshot. I tried calling numbers like +491231234 as well as 00491231234 and 01231234 but the error is always the same.
What to do now?
Click to expand...
Click to collapse
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
dhillonbros said:
There is nothing wrong with these cabs by looking on your images. either there is a problem with your local network or its your internet provider who doesnt supports or block voip packets. you only need one codec out of three, your phone wil self configure with provided codec. Can you untick SIP ALG service in both modem and router you may be using. If its not that then change your provider to voipvoip.com(US based). Let me know your results
Click to expand...
Click to collapse
My phone works great with other not integrated solutions like PortSIP or AGEphone Mobile, so my network is fine. And there should not be a problem with the codecs as well as PortSIP (I don't of the codecs AGEphone uses) uses G711U, G711A and GSM as well (I know of them because theses codecs are configurable over the GUI).
I use AVM FRITZ!Box 7390 as modem / router with its own SIP registrar. That means my Omnia II is configured to use my FRITZ!Box as a SIP server whereas my FIRTZ!Box is connected to my VoIP service provider (the popular German internet provider 1&1) and redirects the VoIP packets to them. It is totally transparent to the SIP client therefore no STUN / ALG (I never heard about ALG before) is used between the SIP client and my FRITZ!Box.
I am not willing to create an account at voipvoip.com because I definitely want to use the phone numbers I got from my ISP but I may provide you credentials for testing purposes to use a phone number from my ISP if you like.
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
jukefox said:
PortSIP runs with the codec G711U as well as G711A with my provider 1&1. GSM does not work.
Moreover I tested a different VoIP configuration on my Omnia II against pbxes.org as an alternative to my routers SIP registrar with the same result.
I still assume a problem with the cabs. I really want to invite you to try to reproduce my problem by connecting against pbxes.org either by creating an own totally free account with registration to a SIP provider of your choice (I may help you with the configuration at pbxes) or by running against my own account at pbxes.org with a number of my ISP.
Please let me know whether you are interested then I will PM you the settings you need for temporary usage. Of course I will donate for your help.
Click to expand...
Click to collapse
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
dhillonbros said:
Thanks for testing it out. On my omnia ii it is working with no problem with great voice clarity. I have changed few setting and tweaked for a-law. My provider is 2talk.co.nz. I still believe there must be some setting which needs enabling in your modem/router. can you bypass your routing by using differnt modem/router without server. Thanks
Click to expand...
Click to collapse
Hello again,
I already bypassed my router by configuring my pbxes.org account, didn't I? Anyway I now switched my router with integrated telephony services support by an older FRITZ!Box 3130 without telephony services to exclude any conflicts with reserved ports or somewhat else. And you know it: Same result.
Last but not least I tried a connection over 3G by activating that option within the configuration. But I failed already with selecting the service. The search action did not succeed.
I'm running out of ideas. What now? Shall I setup an account for you? I really wanna see whether you are able to reproduce my problem or not.
Thanks a lot.