Related
Does anyone know a software that can toggle touch-screen feature on/off on Magitians?
I don't mean blanking the screenduring a call, but rather a program that blocks screen tapping. I want to operate my S110 with buttons without worrying about accidental screen touches.
Hi
You can always use TPenable.exe and TPdisable.exe from any Extended ROM.
Good luck
Thanks but... TPDisable.exe disables all buttons also. So, it doesn't work for me.
Hi, do a search for "mortsaver".
I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.
amed said:
I know MortSaver. This program turns screen off entirely, not only touch-screen feature. So, doesn't work for me either.
Click to expand...
Click to collapse
As far i understud, you can configurate it to do what ever you need:
"What is it good for?
MortSaver is a combination of screensaver, keylock, and a "stay off!" function.
Screensaver:
The display's turned off, but the PPC keeps running (e.g. for audio players). In spite to other tools, MortSaver turns off the dispay again if it's been switched on by e.g. an alert or the on/off button.
Keylock: All buttons (except the one necessary for deactivation, of course) are locked, as far as it's possible to me. A few programs sadly use some undocumented tricks, which allows them to get the button presses even if they're assigned to MortSaver in the system, or set themselfes as topmost window, by which the direction pad keys will be sent to this window. Disabling MortSaver can be done either with one button or a sequence of two buttons.
"Stay off!": PocketPCs are often switched on by themselves or accidentally - by alerts (appointments, SMS, ...) or accidental button presses in your pocket. In those cases, MortSaver can turn off the device again after a selectable timespan (so you recognize MortSaver's active and the device alive).
After power on or system-caused disabling of the screensaver, MortSaver shows a countdown until the screen or device (depending on settings, also see instructions), the button(s) to deactivate it, the time, battery level, a user definable text (e.g. owner infos), and on Phone Edition devices also signal strength and hints about missed calls and SMS."
Source Official mortsaver web page:
http://www.sto-helit.de/modules/edito/content.php?id=36
I am not saying that Mortsaver does not deliver what promises. Simply I am looking for something different.
To rephrase what I need in other words:
1/ having screen on (to see what is on the screen)
2/ having device making no reaction on screen taps
3/ having all button working (slider, power, application)
I've configured my S110 to operate and run everything I need on the run by one hand using just buttins. But quite often accidental touch by finger or cloth (when I pulling it of the pocket or putting it back) stops what I run or making a second call to the person I've just talked.
Ok, now i get your meaning. Perhaps yo can ask directly to mort developer as i did many times at his own email witch you can find at his web page.
Look for Pocketmax ScreenGuard works perfectly. Costs some money though.
ScreenGuard ( http://www.pocketmax.net/screenGuard.htm ) still locks the buttons, though? Except for the green call button - and then only when you also use their PhoneAlarm app.
ScreenGuard falls close to what I am looking to. But it locks buttons and couple of times it locked "too good" - I couldn't unlock my device and needed to HR.
maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...
nonentity said:
maybe u want to try this...
assign it to any button to lock....
to unlock, hold record button and calendar button...
i assigned it to record button for easy usage...
cheers...
Click to expand...
Click to collapse
But this one also turns screen off :-(
Hey guys... before I begin, heres what I have installed.
tcmp with various reg edits
Wisbar Advance2
Wisbar Advance Desktop
Null Keyboard
Here are my questions.
1. the volume slider no longer adjusts the system volume at the today screen. how can I fix this?
2. I was looking to have a big icon/object for the "Lock" function. How can I do that using Wisbar?
3. TCMP has enabled a secondary function for the 2 buttons below the screen--the left one for the "start" menu, and the right one for "close". After installing Wisbar, the right button still closes, but then after closing, it brings up the contact list, which is the primary function of that button (with a short press). How can I undo that?
4. The notification screen that pops up when I get a text msg, etc, is gone!(ever since Wisbar) I just see the icon on the top, but I want that screen back! how can I do that?
5. What is a good program to manually assign all buttons on the system to whatever function I want? (i.e. lock, changing the 2 buttons function, etc.)
Any help would be great!.
Hi all,
I use the BT A2DP profile to stream music through the media player and one of the 'features' that differs from the K-JAM (wizard) and is lacking in the TyTN is the ability to continue that stream even when the device is 'off' (useful for saving battery, switching off the buttons, etc.). With the TyTN whenever the device is turned off the stream also ceases. Does anybody know if there is someway of ensuring that the media player is not switched off along with the device (I'm guessing a registry setting or similar).
All help very welcome.
Cheers
I was wondering this also. My wizard was able to be "off" and still stream. ANyone got any brigjt ideas?
Later, Lew
Have you tried just turning the screen off? PocketPlus has a utility called "Screen Toggle," which does just that.
When used in conjunction with the Button Lock (leaving only the power button active), you just might be able to solve your issue...
goestoeleven said:
Have you tried just turning the screen off? PocketPlus has a utility called "Screen Toggle," which does just that.
When used in conjunction with the Button Lock (leaving only the power button active), you just might be able to solve your issue...
Click to expand...
Click to collapse
Yeah...what he said!
That what I do.
I really miss this feature to.
So there is no way to do it on the Hermes?
Its not particulary elegent to have to perform multiple steps to turn the screen off. it was much eaiser just to hit the off button and listen away...
I'm using VjDeviceLock wich is what you want, I think.
After you've installed it you should create a new shortcut in c:/windows/startmenu/programs/vijay555/vjdevicelock. You can copy an exiting one in this directory and edit the parameter. What you want is "-displayoff". I bound this to my Videocall-Button, cause I don't use video telephony.
If I listen to music I just have to press my Videocall-Button and VjDeviceLock turns off my screen and locks all Buttons except the power on/off one.
Also VjDeviceLock is just great to save money
If you get a sms or a call the device turns on itself. I once didn't notice this and called a random person out of my adressbook, because I had my trion in my pocket and were moving all the evening and somehow started a call.
This cannot happen again, because I started vjdevicelock with parameter "-install". Now everytime my trion turns on itself it gets automatically (re)locked.
thats a fantastic solution and it works really well!
what program are you using to remap the buttons?
Hi,
Does anyone else suffers strange key problems when using VJdevicelock;
After using -displayoff or -displaytoggle and resume back to normal, phone buttons (call/disconnect,videotalk) doesnt work anymore, it need to be softreseted before the buttos work again?
-Kha
EDIT:
just found out that when resuming from -displayoff, after pressing windows and ok softkeys, dialbuttos work again!
I'd appreciate if somebody here could advice me on how to map VjDeviceLock to VideoCall button on my TyTN (I have original TyTN ROM and the VideoCall key is functional ). I couldn't remap it using Buttons configuration utility in Settings.
as I said you have to create a Shortcut in your Startmenu. Shortcuts in Startmenu are shown as available possibilities in Start - Settings - Buttons (Perhaps it's called a bit different. I'm using a german version where it's called 'Tasten')
This is how I remapped it. I don't use a special program.
I use the device lock on today plugins.
S.K.
silent_killa said:
I use the device lock on today plugins.
S.K.
Click to expand...
Click to collapse
This does not turn off your screen AND your device is sometimes getting unlocked when you receive calls or sms.
Remapping VideCall button
sn00x said:
as I said you have to create a Shortcut in your Startmenu. Shortcuts in Startmenu are shown as available possibilities in Start - Settings - Buttons (Perhaps it's called a bit different. I'm using a german version where it's called 'Tasten')
This is how I remapped it. I don't use a special program.
Click to expand...
Click to collapse
Thank you very much for your instant response. I did all you mentioned in your message and I remapped the VideoCall button (is it the Button between Buttons 4 and 5 ? ) but pressing it still doesn't activate VJDevice. Any other suggestions?
Is the device locked when you click on the shortcut?
If not: edit an existing shortcut, let's say "VJDeviceLock About.lnk". Make it point to: \Programms\vjay555\VJDeviceLock\VJDeviceLock.exe" -displayoff
It is right that there is only one "
When I open my shortcut in a text editor the content is:
Code:
64#"\Programme\vijay555\VJDeviceLock\VJDeviceLock.exe" -displayoff"
Yes. The device locks when I click on the shortcut itself but when I press VideoCall button, to which I had previously mapped the link, the Dialpad pops up.
sn00x said:
I'm using VjDeviceLock wich is what you want, I think.
After you've installed it you should create a new shortcut in c:/windows/startmenu/programs/vijay555/vjdevicelock. You can copy an exiting one in this directory and edit the parameter. What you want is "-displayoff". I bound this to my Videocall-Button, cause I don't use video telephony.
Click to expand...
Click to collapse
How can you do this? Are you using a third party app? I see no way to bind anything other than 5 buttons on my device...
I bound it to "Button 5".
Anyone know how to disable the hardware buttons for the incoming call screen?
I only want to answer/reject calls with the slider, not the hardware buttons as I sometimes touch them by accident while getting the phone out of my pocket.
I've tried PocketShield but didn't like it, although it was able to disable the hardware buttons. Any other suggestions?
Have you already tried s2u2? The slider can receive/reject incoming calls and you also have options to disable the hardware buttons. Works great on my elf.
I tried it some days ago, couldn't get it to work the way I wanted it to, mainly because I don't want to use the locking part. I always lock my device with the power button and I only wanted to have the ability to disable the hardware buttons for incoming calls.
After your message, I decided to install it again and give it another try. Changed some of the settings and I think I finally managed to get it working the way I want to!
It's a bit of a memory consuming app for just disabling the hardware buttons for incoming calls, but hey, it works
Thanks!
If anyone finds a solution without using S2U2, please let me know!
Ok, I have uninstalled S2U2 again. Even though it did do the job, it was also a memory consuming application just for disabling the answer/reject keys during incoming calls and I want to keep my device as clean as possible.
I have searched for hours trying to find a solution to this what I think is a very common problem. How many of you have accidentally accepted or rejected calls because of the hardware buttons? In my opinion, HTC should have thought about this and provide a solution for it.
Anyone with a better solution than S2U2?
Thanks for your input!
New version 1.40 of S2U2 uses MUCH less battery. I almost don't notice, it's running. Great program at least for me.
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
can you tell me how you have set your settings for just disabling the hardware buttons for incoming calls in s2u2 ? Thanks
I've used AE Button Plus to disable the 'Answer Call' an 'End Call' hardware keys as I had the same annoying problem of accidentally rejecting a call when taking the device out of my pocket. This works well for me and have now enabled the keys to turn wifi and bluetooth off and on with 3 taps.
Thanks everyone!
I wasn't aware of the latest S2U2 version and I almost gave it another try until I read Anfloyd's post.
I did look at AE Button Plus before, but didn't think it was capable of doing what I wanted: disable the hardware buttons during incoming calls, but still have them functional when there isn't an incoming call (such as showing the phone dial screen which it does by default).
When I looked at the AE Button Plus website, I noticed I couldn't configure the buttons based on the current active screen/program. So, even though I knew I could disable the hardware buttons, I thought I would then loose the whole functionality of them..and that would make the answer and reject buttons on my device useless.
BUT, after reading your message Anfloyd, it got me thinking..I don't need to configure it based on the current screen/program. I can just disable the buttons for 1 tap..and assign programs for them for 3 taps for example.
So, now I have this:
- 1 tap: do nothing. This way, both the answer and reject buttons are not working during incoming calls and I can only use the slider to accept/reject calls.
- 3 taps for answer button: start the phone application.
- 3 taps for reject button: nothing yet, but I'll find something
This is a solution I can work with! I have only tested it for a short time, so if it turns out that AE Button Plus is causing problems I'll give the latest S2U2 another try, but so far this seems to be working just fine.
Thanks again for your input!
ChrisVDD, those options can be found in the S2U2 settings. I don't have S2U2 installed anymore so I don't remember the exact settings. I just disabled all locking features that I didn't need, selected to disable the hardware buttons and chose to use the slider. Give it a try, you should be able to sort it out. If you can't, let me know and I'll install S2U2 again to see what settings you need.
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
PhaseIV said:
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
Click to expand...
Click to collapse
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Click to expand...
Click to collapse
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
GryphonLeon said:
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
Click to expand...
Click to collapse
Thank you for your fast reply, now It works like I wanted it to do.
Is it possible to end call using red hardware button but not to ignore it before answering? I tried AEBplus and it works like it should but that's not all I needed.
danum said:
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
Click to expand...
Click to collapse
The problem I have with s2u2 is that I cannot mute incoming calls... The voulme buttons are locked... the touch screen is locked and mute on face down also does not work....
Maybe A_C will allow us which buttons to lock in the next release...
Hi all,
I have a HTC HD mini and i want to prevent anyone to see what SMS (or how many) I receive when phone is in lock screen. HD Mini users know that when the phone is in lock screen and receive one single SMS anyone can see the text of SMS when press power button. Is there any way to set up this?
And I want to change the button who wake up the phone when is in standby, default is power on, I want to press power on and vol down for example.
Thanks.
anybody?
No answer?
I also have this device and i really don't know of any mod that can be done in the lockscreen so it won't preview SMS. An idea is to stick to the default winMo lockscreen with the slide to unlock from center to left or right.
Now, to be able to power on the device with a combination of buttons needs deeper investigation. You need to mod some things and some registry entries for sure = complicating. But here is an app called "shake and wake", with which you can wake your device by just shaking it. You can google it if ur interested.
10x man.
I tried already wm lockscreen but that one does not work with pasword. I need something to keep pasword on unlock.
Try Throttle Lock, not so much a password as a pass pattern but it works for me.