I need a little help with WMWifiRouter please.
phone: xv-6800
rom: dcd 3.0.4
radio: 3.35.04
I downloaded and installed the trail version of WMIWifiRouter. I have gotten it to the point that it starts up cleanly, my laptop see's the connection and the laptop says it is connected.
I can not browse any websites from the laptop. I did not install any other hacks to make this work, I didn't make any registry changes, etc, etc, etc. Is there something else I need to do, I've never even did tethering with this. Ultimately I want this to work so my PSP and iTouch can use the connection.
WMWifiRouter Fix
You didn't give the version of router SW. I'll assume it's the newest. I had a problem with this new version from the get-go. I reverted to version .91 and it works like a charm. Make sure you have ICS (internet connection software) installed. You're running DCD's so it should be there. I'm on the stock rom Rev A and .91 works perfect for me.
I was using the latest trail version, I have now uninstalled it and installed the .91 version. I am running into the same problem, it connects then sits on Acquiring Network Address for a long time and then I end up with 169.254.101.184/255.255.0.0 which does nothing for me.
I've tried it with and without "Use DHCP Allocator" and I've tried it by browsing the wireless connections available as well as making an adhoc computer to computer one from the laptop.
Wireless see's the SID, and when connected it says "Unsecured computer-to-computer network. ICS appears to be running and connected and WMWifiRouter appears to be running/ready.
Try this.....
You must have the wifi switch turn on and enabled for the program to work.
Related
I used to be able to tether using my old ROM as well as the "un-official" new ROM versions prior to the recently released ROM update dated 4/09/07.
I use Missing Sync (ver 3.0.2) on OS X, and it would allow me to tether the 8525 using internet sharing set to USB. Now the only way I am able to tether is via the Bluetooth PAN, and even then the connection is spotty at best.
Did the official ROM change the way Internet Sharing works? This is very annoying and any assistance or ideas would be welcome.
I downgraded from the CUSTEL 2.5 WM6 ROM due to Missing sync's inability to sync with it as well as an inability to tether my Mac. Vista using Bootcamp works but Vista isn't my cup of tea...
Soon...
In a couple of weeks time you will have a solution to your problems with Apple OS X and Microsoft Windows Mobile. (Hint: it's not free.)
I am assuming that this would the much anticipated Missing sync update. If only I could shorten the wait... oh well.
Thanks.
Not really. Trade your 8525 for the iPhone!
bluetooth pan
something must be wrong with your phone because I use Bluetooth pan with internet sharing at work, in my car, at home and it works just fine. I even thought about ditching the Internet at home
neomuzic said:
something must be wrong with your phone because I use Bluetooth pan with internet sharing at work, in my car, at home and it works just fine. I even thought about ditching the Internet at home
Click to expand...
Click to collapse
I do it too. All the time. Is AWESOME from the car, especially in a a 3G area. (Parked, not driving.)
i can't even connect my 8525 to my mac via bluetooth. it worked once and now the phone won't open up the passcode screen to connect.
edit: my rom is version 1.34.502.3. should i update to a newer one?
I think its the location that I am at that may be to blame. I have a really slow connection via Bluetooth PAN. The same isn't true when using Vista and Internet sharing via USB - that connection is much faster (though it too blanks out at times).
As for connecting to OS X: simply start the Bluetooth setup assistant on the mac and search for "any device". Then select the phone and pair the two. At the very end of the process the Mac will list the services that are available via the phone. One of them will be the shared network.
ranjeetsodhi said:
I think its the location that I am at that may be to blame. I have a really slow connection via Bluetooth PAN. The same isn't true when using Vista and Internet sharing via USB - that connection is much faster (though it too blanks out at times).
As for connecting to OS X: simply start the Bluetooth setup assistant on the mac and search for "any device". Then select the phone and pair the two. At the very end of the process the Mac will list the services that are available via the phone. One of them will be the shared network.
Click to expand...
Click to collapse
yeah, it stalls after i select it from the device list. the screen where it gives me the passcode to connect it, it seems like my phone doesn't receive it. not sure. but you think i should upgrade the rom? looks like mine is kinda old.
I'm posting with OSX using my phone right now
delete the bluetooth pairing on the osx machine and on the phone
from osx bluetooth assistant and select any device
if it asks about using the phone as a headset disselect that
if the phone once pairs asks about a serial device do not select that
verify if bluetooth still is on on the phone
goto internet sharing
bluetooth pan
connect
make sure its actually connected to the internet
on the osx machine click the bluetooth icon again and select "join network on ___your phones name____ "
thats it!
sometimes give it a second
if it still doesn't work make sure you don't have some kind of crazy firewall setup
using Custel's 2.5 rom (windows mobile6)
juicychus said:
i can't even connect my 8525 to my mac via bluetooth. it worked once and now the phone won't open up the passcode screen to connect.
edit: my rom is version 1.34.502.3. should i update to a newer one?
Click to expand...
Click to collapse
Hi,
Some weeks ago I tryed to use MissingSync for internet sharing with different WM6 versions without success. With official AKU3.3.1 version it works with the USB cable. But battery life is very short with this version.
Regards.
Yes, missing sync does not yet support WM6. Try the "normal" bluetooth pan method described above.
Anyone tried doing OS X tethering with newer versions of the WM6 roms?
I'm currently running vp3G 2.0 (WM6), rom date 5/15/07, radio 1.40.30.00, protocol ver. 32.73.7020.16H
Because I'm working offsite tomorrow, I was hoping to use my phone to tether my laptop to work with VPN on the laptop... and then I can login and out of the timeclock, etc. But trying it from work tonight before I leave, I can't get the bluetooth on my 8525 to connect to the PC.
Followed Neomuzic's instructions to the letter, but Safari isn't getting things working. Any assistance would be appreciated!!!
Nevermind... I'm a dork! Figured out where Internet Sharing was on the phone, and all is well. Having a little trouble connecting to my work proxy server... but messing with that now.
todd_jg said:
Yes, missing sync does not yet support WM6. Try the "normal" bluetooth pan method described above.
Click to expand...
Click to collapse
As of August2007, Missing Sync 4 supports WM6.
I'm also using bluetooth pan right now to post
Hello all,
I usually dont post much since i rarely have anything to contribute, but this time I do. I am running a macbook connected to my cingular 8525 thru the bluetooth pan and have zero problems. I upgraded my rom to the new vp one with all the latest settings and love it. No more looking for a hotspot for me. I dont use safari broswer on my mac, i use firefox. Thanks to everyone on this forum with the knowledge and time for helping the rest of us.
What i do is connect my JasJam to xp running through parallels, start internet sharing and it installs the drivers(first time of connecting it) and then it works perfectly everytime. Only in xp though.
I have installed the latest missing sync but havent tried internet sharing on mac osx but now that u guys say it works thats awesome! Will mess with it later (knowing me i won't attempt to get it to work until i'm off in some foriegn area with no internet connection and will need to download drivers that i'll struggle to get through pie/opera on my jasjam...) i fail to plan ahead with things like this! lol
Delete post
Delete post?
Tethering 8525 to MACBOOK. HELP.
I tried several different approaches to tether my 8525 to my MACBOOK, with no success.
I have specific scripts from the web installed into the modem scripts folder. No luck with any of them. I believe the scripts aren't the problem but the COM ports are the culprit.
I recieve an error message that says," Failed to open RFCOMM serial channel. Check if authentication needs to be enabled in your device"
This is after pairing the 8525 to the MACBOOK and completing the blue tooth setting in the Network folder in the System Preference folder.
The pairing is successful because I can "send files" to the 8525 via blue tooth icon.
I read somewhere that the MACBOOK should allow me to set and choose COM ports but I haven't found the option.
My question is where do I find the COM port option in the MACBOOK because I believe that is where my problem is.
MACBOOK C2D, OS 10.4.10.
8525 ROM: 2.15.502.3
abubasim said:
Not really. Trade your 8525 for the iPhone!
Click to expand...
Click to collapse
had iphone not nearly as good as my tytn until its fully hacked but think bout what your saying befor you speak lol
kidding
Been having issues all along getting wifi tethering to work properly, I've had success sharing the connection over USB, I don't care if it gives me a single user tether or an mobile wifi hotspot, I just need it to connect with my lenovo x201.
It's a rooted incredible with the latest build of skyraider, I did the leaked OTA radio update to get that, which I assumed would fix this issue... guess not!
The laptop recognizes the network, but is now getting stuck at identifying, sometimes it will get an IP address assigned but will display no internet access (this is windows 7 ultimate)
Anyone else able to replicate this issue or know of a potential fix? I've tried several of the solutions for other wifi problems I found around the web and here (where applicable)
I live on campus and I get internet through residence...
I set up connectify on my computer so that I can use Internet on my phone as well.
Has anyone tried this??
On my x10, it says it's connected, but I can't load any pages (Web page not available...says the browser) and when I look at the connectify panel, under Connected Clients - 1, it's got sony logo and says <Connecting...>
I'm not sure if it's because my wifi card doesn't support it? (but it says all do..hmm)
or if it's my phone? My phone's always had problem with wifi 'outside home'.. Like the only wifi I would be able to use would be a secure wifi through my home router. I haven't been able to connect to any 'public wifi' like at cafe or restaurants...
If anyone's used this and knows how to fix the problem it'd be great... thank you!!!
(or it could be that my school's lame and they block any internet connection through personal hotspots )
Same happened with me on my network. I have tried it on my friends laptop and it worked just fine but i wasn't able to connect using my own laptop( on my home connection which got a windows server machin ).
I'm just guessing it was caused by my windows server machin and some firewall setting that i couldn't adjust.
By the way i just the exact same problem as yours, phone keep showing that it's connected and couldn't open anything and Connectify keep saying connecting.
sorry for my bad english.
I had the same issue, it was a firewall thing. I emailed Connectify and was told
"At a minimum, DualServer.exe (ConnectifyNetServices.exe in 2.1 Beta 1) needs to be allowed to access the network, and ports 67 and 68 for DHCP, and port 53 (DNS), as well as 1317, 1318, and 1303 (internally used ports for DHCP and DNS), need to be open. Connectify 2.1 Beta 1 will try to configure Windows firewall to open all necessary ports."
Currently i have just disabled windows firewall and all works fine (I have a hardware firewall between me and WAN).
I had the same problem with my x10. It kept saying connecting. I contacted the developer, they asked me to use beta. I just installed beta and every thing is fine now...
h**p://www.connectify.me/download/2.1/ConnectifyInstaller_2.1_Beta_3.exe
replace ** with // as Im not allowed to link...
07ee17 said:
I had the same problem with my x10. It kept saying connecting. I contacted the developer, they asked me to use beta. I just installed beta and every thing is fine now...
ConnectifyInstaller_2.1_Beta_3.exe
replace ** with // as Im not allowed to link...
Click to expand...
Click to collapse
this version didnt work for me but the 2.2 version works for me, My phone is Xperia x10 mini 2.1
Using HP Pavilion DM4, I can use connectify and my X10 gets internet access...not sure what's your problem though.
I use Connectify on my Win7 PC too, sometimes, out of the blue, while I am connected and loading pages, it stops, even though it is still connected.
I find that killing the app and the process on my PC and then opening the app again, fixes the problem.
Connectify is very buggy but incredibly useful when it works right, imho.
Just that. Wifi or USB tether doesn't function. The phone says it's connected, but the laptop says no network connection.
There any replacement apps that might help? I flashed the latest radio and that fixed a GPS problem I was having, but didn't fix the tether. Suggestions?
Its not clear, were you able to tether before, and now you've lost that function. Or is this the first time you've tried it?
If its the first time, ATT has blocked this function with the intent that you pay for the extra tethering fee.
But a simple reg edit works around this:
http://forum.xda-developers.com/showthread.php?t=569953
Also, there is a free WiFi sharing app on this site, if you do a search. There are also paid apps, like Walking Hotspot, that also work.
Keep in mind, tethering without the tethering plan is a violation of ATT's terms and conditions. They reserve the right to levy big per kb fees or cancel your service.
That said, I've done it from time to time while on business trips (no excessive data usage), and its never been a problem.
I'm an idiot, I forgot to update my sig. I'm not running stock anymore, sorry. I actually forgot which rom I switched to, but it was one of the lighter ones. had wifi router, office, and everything basic on there though. What option do I have if I don't remember which ROM I used?
The custom ROMs I've used (Energy, simplicity) support tethering by default without any modification or settings to change. Or the WiFi router will basically do the same thing.
I still don't know if you have been able to tether before, and suddenly can't; or this is you first time attempting it.
If its something you've been able to do before, some computers can be finicky (for no very ovious reason) with the Internet Sharing function. Try a different USB port, or to reboot your system. Also, you need to have Active Sync installed on your computer (or Windows Mobile Device Center, in the case of Vista or Windows 7). This was a big "duh" moment for me one time. I was trying to get tethering up on my work laptop. Then I realized that I had never installed Active Sync since my work gave me a new laptop.
Tether/Internet Sharing via Bluetooth should also work, if you computer has Bluetooth.
I apologize again. With this ROM I've never been able to tether, and I just reinstalled windows and installed activesync. I can do activesync and file transfers and everything else. What else can I do? Maybe it's a driver issue between windows and the phone? I'unno.
This is what happens.
lordxiagan said:
Just that. Wifi or USB tether doesn't function. The phone says it's connected, but the laptop says no network connection.
There any replacement apps that might help? I flashed the latest radio and that fixed a GPS problem I was having, but didn't fix the tether. Suggestions?
Click to expand...
Click to collapse
Ok, if you connect to the internet from the phone, and once connected you then hooked it in the PC, then you wont be able to connect tether. So turn off any phone internet connection, and then hooked it up to the PC , then connect.
I don't think he is talking about being connected to the internet. When you start Internet Sharing, it will say on the phone whether its connected to the PC over USB, or not. That is what I think the OP is talking about.
just update your rom... go to one of the energy roms that has wifi sharing built in and you'll be ready to go.
Probably the easiest thing you can do to get this working.
What I'm trying to....
redpoint73 said:
I don't think he is talking about being connected to the internet. When you start Internet Sharing, it will say on the phone whether its connected to the PC over USB, or not. That is what I think the OP is talking about.
Click to expand...
Click to collapse
What I'm trying to explain is that, if you have data running in your cell before connecting IS, and connect it to the PC it wont tether, you need to first end Data Connection, connect IS and then HOOK THE USB to the PC.
I really tried to find this answer before posting!
My Simple Touch was working fine with my home wifi until I rooted it. Now it can't connect. The signal is fine; the nook is right beside this computer which is connected fine. It says the signal is good. It just never connects.
I tried forgetting it and adding that network again.
Suggestions?
ravenrose said:
I really tried to find this answer before posting!
My Simple Touch was working fine with my home wifi until I rooted it. Now it can't connect. The signal is fine; the nook is right beside this computer which is connected fine. It says the signal is good. It just never connects.
I tried forgetting it and adding that network again.
Suggestions?
Click to expand...
Click to collapse
What firmware version are you running? B&N made a number of improvements to wifi in later versions. You might upgrade to a later version and see if that work better. If you want to completely reset to factory, there are instructions for doing so.
Also, sometimes it depends on your router. Mine had trouble connecting because it didn't send it's SSID. (this problem persisted with all versions.) Check your router settings (or get your parents to) and see how it's configured, and be sure it is compatible with the nook.
some router is better, my nook2 wifi is OK in my home but does not work in office