Related
I was thinking maybe I could take off that bottom "HTC" cover and gently pinch the sleeve of the USB connector back together. Anyone successfully done this?
Thanks!
this is exactly why i use the dock & WANT the car dock..
It just pops off, Google for a tear down.
I'm in the middle of taking mine apart to clean dust from the screen. Can't get a warranty replacement cause the phone is rooted. The bottom piece is a real pain to take off, but can be done with some patience. Just make sure to use a plastic tool and not a screwdriver. I used the ifixit teardown guide and a youtube teardown guide.
Quick question, how long was it before you got dust under the screen? Also did you notice any signs such as the screen not being totally flush with the housing? I really need to know because I'd like to root my N1 but it's only been a month. Also from what I've seen around the forum there is a gentlemen that can help you get a warranty from HTC but idk about now that you've opened the phone
dhendrix11 said:
I'm in the middle of taking mine apart to clean dust from the screen. Can't get a warranty replacement cause the phone is rooted. The bottom piece is a real pain to take off, but can be done with some patience. Just make sure to use a plastic tool and not a screwdriver. I used the ifixit teardown guide and a youtube teardown guide.
Click to expand...
Click to collapse
Did you try to get a replacement and were refused because you are rooted or did you not try because you knew you would be refused?
mafaesto said:
Quick question, how long was it before you got dust under the screen? Also did you notice any signs such as the screen not being totally flush with the housing? I really need to know because I'd like to root my N1 but it's only been a month. Also from what I've seen around the forum there is a gentlemen that can help you get a warranty from HTC but idk about now that you've opened the phone
Click to expand...
Click to collapse
Had my phone a couple months before I noticed any dust. The bottom left corner (where there was dust) seems like maybe it's sealed as 100% as the other corners, but nothing obvious at all and no clicking sound type stuff that others have reported. I posted some pictures in the dust thread.
irishrally said:
Did you try to get a replacement and were refused because you are rooted or did you not try because you knew you would be refused?
Click to expand...
Click to collapse
I told them I'd rooted and they guy said my warranty was void. Said I could send it in and there's a chance that they would take it, but also that they could charge me for a board swap, which is $196. He couldn't give me a certain answer how it would be handled. Said that they take care of the warranty service in their Houston location, which wasn't where he was at, so he couldn't find out for sure.
I have dust on the side of my screen. One white speck just to annoy me. I wouldnt mess with taking it apart in fear that i might add even more dust underneath
dhendrix11 said:
I told them I'd rooted and they guy said my warranty was void. Said I could send it in and there's a chance that they would take it, but also that they could charge me for a board swap, which is $196. He couldn't give me a certain answer how it would be handled. Said that they take care of the warranty service in their Houston location, which wasn't where he was at, so he couldn't find out for sure.
Click to expand...
Click to collapse
I dont get why people are doing this. If it was me, I'd keep quiet about the bootloader's status and see if they notice.
It's not like you can hide the telltale padlock.. It's there for a reason. HTC made it easy too see if you voided the warranty.
Indeed you can't, but the technicians may not care, or even be paying attention when it boots up and miss it, or even not bothering to turn it on for something like a dusty screen.
Rusty! said:
I dont get why people are doing this. If it was me, I'd keep quiet about the bootloader's status and see if they notice.
Click to expand...
Click to collapse
I was told that if they notice, they'd likely charge my card $196 to replace the main PCB. The other alternative was that they'd call me back and tell me the warranty was void and send my original phone back and have me send back the replacement. Either way, I have to wait til that all plays out before I could root the replacement phone and get it set back up like my original. Instead, I spent two hours with the phone I've got and the screen looks like new.
dhendrix11 said:
Had my phone a couple months before I noticed any dust. The bottom left corner (where there was dust) seems like maybe it's sealed as 100% as the other corners, but nothing obvious at all and no clicking sound type stuff that others have reported. I posted some pictures in the dust thread.
Click to expand...
Click to collapse
I appreciate the response I'll check it out, I am just extremely worried. At the same time, I have never had my phone replaced. I usually just work on them myself for all those simple problems. I don't know that my screen is sealed properly, it clicks occasionally but hasn't been lately. But it definitely doesn't sit flush with the right side..
starkruzr said:
I was thinking maybe I could take off that bottom "HTC" cover and gently pinch the sleeve of the USB connector back together. Anyone successfully done this?
Thanks!
Click to expand...
Click to collapse
Maybe this would help , if you dont fix it ...
http://cgi.ebay.com/Nexus-One-Port-...ZViewItemQQptZCell_Phones?hash=item5886e20fb8
Good luck ...
50 bucks for a standard micro USB port? That's daylight robbery, any electronics supplier will have for peanuts!
A prelude...
Right, the other day I dropped my DHD onto some concrete from about 2 meters... Predictably the glass digitizer shattered!
However, I have no insurance (because I'm an idiot) and HTC quoted a repair cost of £85. Yes, £85. So I hit ebay and bought a digitizer, and decided to do the job myself!
Before I start:
1) THIS WILL VOID YOUR WARRANTY
2) I am not responsible if you do anything wrong, or even if you do everything right and it still goes wrong, or if your girlfriend leaves you, or if your dog dies, or if... You get the point
Part 1: Preparation
What you will need:
Your hands
A little brute force
1) Turn your DHD off!
2) Remove battery door and battery.
3) Remove sim card cover and take out sim card + SD card.
Done! That was definately the easy part...
Part 2: Taking off the unibody cover
What you will need
A torx 5 and torx 6 (T5, T6) screwdriver (or a very small flathead)
A small flathead screwdriver
LOTS of brute force
Some brain cells
1) Remove the LED flash cover. To be honest im not sure if their is a way this is meant to be done properly, but I used a flathead screwdriver (a VERY small one) to force it out from the top. This of course risks damaging the unibody cover but I really cant see a better way of doing it! (Turns out there is a better way of doing it, but you need an 'opening tool.' Cool).
2) Undo the 5 T6 screws holding the unibody to the device, they are labelled in the picture below in purple:
If you dont undo the screw underneath the LED flash cover and try to pull the unibody off, you end up with this:
Yes, I am that stupid.
(Still works though!)
I actually used a small flathead screwdriver to undo the T6 screws, but this risks ruining the screw itself. Also, the screws are tiny so make sure you keep them safe!
3) Remove the volume strip, its just a piece of plastic that covers the buttons inside, pinch it and then gently pull it upwards. It is quite delicate so be careful!
4) Slide the unibody case off. This isnt as easy as it sounds, it involves some brute force and some shimmying around... Be careful though! When I did this I think I damaged the LED at the top that flashed when you are low on battery. To be honest I found it extremely irritating anyway so I'm quite glad...
Part 3: errr...
Ok, I must admit I haven't actually got any further yet, I'm in the process of peeling away the old glass digitzer. When the new one arrives on wednesday I will complete this guide, but in the meantime here is a picture of the beasts' insides! If you have any requests for anymore pictures please don't hesitate to ask:
Poor thing
man, i think you should remove "desire hd" from your signature! =o)
i just want to know a little more about power button and volume button, since i think i will need to change it someday! =oP
thiagodark said:
man, i think you should remove "desire hd" from your signature! =o)
i just want to know a little more about power button and volume button, since i think i will need to change it someday! =oP
Click to expand...
Click to collapse
Sure!
Power button:
It's the small grey square thing, the rest of it is attached quite nicely to the unibody!
Volume button/thing:
Looks quite flimsy the actual bit of plastic itself that comes off can be bought on ebay though!
Nice
Thanks for this but a fix guide from the manufacturer would have been great...
For peeling away old digitizer, put your DHD for 5min in oven previously heated to 60°C .
One guy do it with HTC Desire and it works. There is actually full guide from this guy how to change digitizer on HTC Desire (not DHD) but guide is in latvian and Google translate is not very accurate, so it will not help you But idea with oven heated to 60°C is usable.
And dont overheat it
I found a disassembly video on youtube.
Enjoy: http://www.youtube.com/watch?v=JfatoeWbMRk:D
thanks! Now I know how to open my phone when i want to mod it.
Robi-K said:
I found a disassembly video on youtube.
Enjoy: http://www.youtube.com/watch?v=JfatoeWbMRk:D
Click to expand...
Click to collapse
Good video... But that voice is the most irritating thing I have ever heard in my life!
any progress?
wao....who on earth will want to disassemble?
aivarss said:
For peeling away old digitizer, put your DHD for 5min in oven previously heated to 60°C .
One guy do it with HTC Desire and it works. There is actually full guide from this guy how to change digitizer on HTC Desire (not DHD) but guide is in latvian and Google translate is not very accurate, so it will not help you But idea with oven heated to 60°C is usable.
And dont overheat it
Click to expand...
Click to collapse
I Can help to translate from Latvian to English just give me the link of that guide.
Sent from my Desire HD using XDA Premium App
thiagodark said:
any progress?
Click to expand...
Click to collapse
The reason I havent progressed any further is that I dropped the damn thing again whilst it was in pieces so its completely wrecked...
Open circuit board + wooden bedroom floor = £500 down the drain!
If anyone wants me to finish the guide I can, I got as far as getting the LCD off.
Keep Going
If its toast then please keep going, anything your able to document will help the next one of us that ends up having to take our phone apart.
Yours may be dead but you can help save others!
cool guide ))
now i know
EDIT
"meyourchum" has provded a link to get offical disassembly instruction with lot more information.
Check it for yourself
Hello folks,
I had a chance to work on my friends arc who bought a Rogers version and dropped it. He had it totally mess on the case and needed the full housing replacement.
I hope that doesn't happen to anyone. I didn't take any photos but I am trying to explain everything as it was to help anyone with this.
General Note:
- Anywhere you got stuck, watch some X10 Disassembly video
- Be very gentle to your phone in this process
- Besides all the screws the rest of the phone is put together with glue(Sticky Back) and snap(plastic for main board)
- Using this information on your own risk as I don't take any responsibility if anything happens to your phone.
Instruction
1) Remove the back battery cover. Thats the easiest part
2) Need star shaped screw driver[Trox](I bought the set for $5) there are 4 screws like that and two which opens with phillips screwdriver(tiny) This is what I bought
All the above we all have seen them
3) After removing the 6 screws remove the front fascia of the phone with a guitar picks, something skinny but sturdy*
* I recommend not using anything other than rubber or plastic in the whole process.
4) Main board is snapped in with plastic to the body which easily can be opened.
5) Little board on the bottom is glued(sticky back @ top) which you can remove with pulling little hard but make sure you don't break it.
6) Majority of the wire you see connected to mainboard can be discounted (snap in wires)
7) Removing the screen: from outside of the phone (like you are looking directly to screen like you normally do) you need to put something under neat and raise up the screen. This part has glue as well and its hard to lift but I did it and it should be possible.
8) if you are doing a full housing replacement, then there are stuff here and there that you need to remove and re-use it on the new housing(Like 3.5 mm jack, HDMI lid, etc.)
Good Luck and let me know if you have any questions.
1st time... ehm.. taking the Arc apart, that is!
Helluw there
Just read your post, and thought I wanted to share with you, that I might be opening one of these slick little things. My friend broke his display, and the ISP is talking about some 'off the scale' repair prizes.
...So, he asked me to do the job
Told him I didn't have any experience on the disassembling of this phonetype, but he trusts me it seems
I might return with some questions in case of problems, is that OK with you Nimche?
Greetingz
Hope u have the courage to make a video next time
Sent from my Arc using XDA premium App
xelion said:
Helluw there
Just read your post, and thought I wanted to share with you, that I might be opening one of these slick little things. My friend broke his display, and the ISP is talking about some 'off the scale' repair prizes.
...So, he asked me to do the job
Told him I didn't have any experience on the disassembling of this phonetype, but he trusts me it seems
I might return with some questions in case of problems, is that OK with you Nimche?
Greetingz
Click to expand...
Click to collapse
Sure, no problem. I would be more than happy to answer. Lets see just some general stuff...
Note: anywhere you got stuck, watch some X10 Disassembly video
Note: be very gentle to your phone in this process
- you remove the back battery cover. Thats the easiest part
- you need that star shaped screw driver(I bought the set for $5) there are 4 screws like that and two which opens with phillips screwdriver(tiny)
All the above we all have seen them
after removing the 6 screws
note: besides all the screws the rest of the phone is put together with glue and snap(plastic for main board)
- remove the front fascia of the phone with a guitar picks, something skinny but sturdy*
* I recommend not using anything other than rubber or plastic in the whole process.
- main board is snapped in with plastic to the body which easily can be opened. I change full housing and not sure if you have to remove the hard key button from the bottom end of the phone too or not but that little board on the bottom is glue which you can remove with pulling little hard but make sure you don't break it.
- All the wire you see connected to mainboard can be discounted (snap in wires)
- There is a big one which goes to the screen you have to dis-attach that before removing the screen
- Removing the screen: from outside of the phone (like you are looking directly to screen like you normally do) you need to put something under neat and raise up the screen. This part has glue as well and its hard to lift but I did it and it should be possible.
Good Luck and let me know if you have any questions.
Can you answer this??? It get's hot here (and also in the same spot on the front.. so what's inside at this point??
CPU is right behind the second cover. I wish I could take some photos.
Nimche said:
CPU is right behind the second cover. I wish I could take some photos.
Click to expand...
Click to collapse
Thanks for the clarification. I was also suspecting since this area gets damn hot when playing games and even at charging (sometimes).
So seems like they move the CPU from behind the battery in X10 to near to the camera in Arc .
Can I change only the front faceplate around the screen without removing the mainboard? How easy would that be? I want to change mine to Misty Silver as Rogers only carry the Midnight Blue.
Also, for glued parts, do I have to glue them back on the new housing?
hellocng said:
Can I change only the front faceplate around the screen without removing the mainboard? How easy would that be? I want to change mine to Misty Silver as Rogers only carry the Midnight Blue.
Also, for glued parts, do I have to glue them back on the new housing?
Click to expand...
Click to collapse
Glue part, they are more sticky than glued. You just simply stick it back where it was.
Where is the silver face you found?
This is retarded from them...
Digitizer and screen(one part) are sticked to the front face. In order to for your to change the faceplate only(front) you may have to go through the whole process because the wires from digitizer are going through a big hole to the main board. You don't want to mess around with $700 or $800.
Inside, everything is small. really small. I thought I totally screwed up the whole thing. Technology has gone forward alot since I was a kid putting radio together.
Good Luck
prathaban said:
Thanks for the clarification. I was also suspecting since this area gets damn hot when playing games and even at charging (sometimes).
So seems like they move the CPU from behind the battery in X10 to near to the camera in Arc .
Click to expand...
Click to collapse
Yes, there are two board one above battery and one below batter @ bottom of the phone
On top is the main board
on bottom is the board for hard keys.
Nicely put together but they could have done a better job there....
Are there three parts to the housing? I assume there is the front plate, middle housing with the chrome, and the battery cover. The mainboard should be in the middle with the chrome. So I can't just detach the screen front the front plate? What is holding the three pieces of housing together? The six screws?
There are silver housings on eBay from time to time. Though, blue is a lot more common.
Three pieces. Back battery cover which is nothing.
Then there are two main pieces.
Chrome which is more like a holder of the fascia.
If I remember correctly, the front Fascia is the one holding all the board on it including that metal look piece(aluminum probably)
I will take photos and upload here...
Uploaded photos to the first post...
Hey, I'm looking to replace the chrome piece which has a few nasty chips in it, after removing the second back cover, how easy is it to take off that chrome piece?
Great post
How can I replace digitizer? I dropped my phone and the glass cracked
anyone know where i can get the tiny screw driver? I cant seem to find the correct one. they are either too small or too big.
how easy is it to replace the front cover, ive cracked the top of it and chipped a bit out the side (surrounding the screen) i presume it'd be simple enough. And does anyone know where i can get a good quality/genuine front cover replacement?
soldiers33 said:
anyone know where i can get the tiny screw driver? I cant seem to find the correct one. they are either too small or too big.
Click to expand...
Click to collapse
Sorry, you could have sent a private message.
I bought the screw driver here at local tool shop. Home Depot sells them.
Its called Trox Screw Driver and I bought exactly this one http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=100087664&langId=-1&catalogId=10053&ci_sku=100087664&ci_kw={keyword}&cm_mmc=shopping-_-googleads-_-pla-_-100087664&ci_gpa=pla&locStoreNum=618
I don't have the packaging but they should be standard.
Good Luck
mps83 said:
how easy is it to replace the front cover, ive cracked the top of it and chipped a bit out the side (surrounding the screen) i presume it'd be simple enough. And does anyone know where i can get a good quality/genuine front cover replacement?
Click to expand...
Click to collapse
You can find the whole housing between $30 to $40 but the front cover is that actual main piece that holds all the internal components + the screen.
If the crack doesn't bug you much, I would not do it since you have to replace the sticker behind you battery as well, which is not easy to peel off + you have to take the screen off the old front fascia which is glued and kind of hard to take off.
Downside of the whole thing for me was the sticker. I have to find an alternative for this problem.
Hey everyone my HTC HD2 got the Non-Responsive screen problem a week ago, & did a lot of research and found out that it was most likely a hardware problem with a cable..... So a lot of people would tell the people with the problem that the "Touch Screen Digitizer" is dead (like the cable), or it needs to be cleaned... pretty well go out and buy a new one... BUT I have never found evidence that someone has done this and it has successfully "cured" their HTC HD2 Non-Responsive touch screen problem...
So I was looking for anyone on the forums that could confirm this is a solution or give me any tips on what I should do.... AND no I don't have enough money to get a new phone, nor do I live in the USA so I can't send it in to fix it...
This is what I was going to buy for it:
http://www.ebay.ca/itm/NEW-OEM-HTC-...781?pt=LH_DefaultDomain_0&hash=item519a3d2e45
Thanks for taking the time to read my Thread, its much appreciated!! I hope I can find a fix!!
PS: If anyone wanted to know what it looks like out of curiosity I posted 3 pictures with RED circle HIGHLIGHTING the problem when I try to touch something....
My digitizer has been a bit dodgy for the past few months. It's ironic that when I finally found out what the issue was and called HTC, my factory warranty had ended exactly 4 days prior to the call.
Fast forward 3 months and my phone has now been unresponsive for 3 hours despite my prying and tweaking various hard parts.
I disassembled the phone down to the main board just to see how hard the install is, but it's a bit intimidating once it's time to start pulling all the film and ribbons. A bit too tight and small parts for my liking.
Time to hit CL to see if I can find a cheap replacement.
Good luck with your repairs. I may be following in your footsteps if I can not find a good deal.
Yeah I will see how well it goes... if anyone has useful info, i will be more than grad to hear it
Thanks
Many people attempt to replace a digitizer, but I simply don't recommend it, we see enough of do-it-yourselvers who created problems in addition to the original ones.
What I do recommend, however, and I stated it on many threads already, is to get an LCD+DIGITIZER assembly. Simply because it is easier to fit. Not saying the overall fitting is easy, always depends on your overall skill, so ensure that you are familiar with the procedure BEFORE you begin. But you will save yourself a lot of trouble by getting the whole thing, as opposed to the digitizer only for the sake of a few bucks.
However, if anyone still feels intimidated by the whole thing, I am on the lookout for working main board. Advertised a few times in the marketplace with limited success. So if anyone smashed their baby and will be looking to replace, rather than repair - drop me a PM. I am in NZ. Will pay by Paypal.
Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!
cheeselump said:
Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!
Click to expand...
Click to collapse
How much did the set cost?
cheeselump said:
Mm i've replaced my HD2 screen just last night. Trust me it's among the most complex phones around.
Unless you've done a few phones before i wouldn't advice you DIY. Otherwise you can look carefully at the Leo Ds. and Leo As. guides on youtube. those helped me!
Mm i killed my LCD in the process of removing the digitizer as it's stupidly glued on to each other and the LCD glass is thin as hell.
Get the set, it'll save you your time
Mm i got mine of ebay, from the seller goodgoodsecho. It works perfectly well for me!
All the best!
Click to expand...
Click to collapse
Thanks I will check it out, hopefully it won't be to hard and I hope I can repair it!! oh and could you post a link of the youtube & manual you used to replace your screen?? Thanks
Oh would anyone suggest then just calling HTC and sending it to them to repair?? or does that cost to much??
Thanks everyone for the help
One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.
GnatGoSplat said:
One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.
Click to expand...
Click to collapse
Yah I was looking at the video's and they were taking off EVERYTHING... it looks really hard to do.. I don't know whether I want to do it anymore.....
oh and are you talking about the digitizer itself or the LCD+digitizer for your method?
Thanks
Heronization said:
Yah I was looking at the video's and they were taking off EVERYTHING... it looks really hard to do.. I don't know whether I want to do it anymore.....
oh and are you talking about the digitizer itself or the LCD+digitizer for your method?
Thanks
Click to expand...
Click to collapse
Yep, there is absolutely no reason to take off everything like some people seem to think is necessary.
The way I'm talking about requires removing LCD+digitizer. In fact, I think you'll always have to remove both because the connector for the digitizer is under the LCD. Anyway, the way I did it, I went from removing the the phone insides from the rear housing straight to separating the LCD+digitizer assembly from the frame. No removal of any boards or flex cables. The only cable to be disconnected is the LCD+digitizer assembly one. Getting it disconnected and reconnected does require unplugging the front button flex and removing the screws for the bottom logic board to loosen it, but that's all.
GnatGoSplat said:
Yep, there is absolutely no reason to take off everything like some people seem to think is necessary.
The way I'm talking about requires removing LCD+digitizer. In fact, I think you'll always have to remove both because the connector for the digitizer is under the LCD. Anyway, the way I did it, I went from removing the the phone insides from the rear housing straight to separating the LCD+digitizer assembly from the frame. No removal of any boards or flex cables. The only cable to be disconnected is the LCD+digitizer assembly one. Getting it disconnected and reconnected does require unplugging the front button flex and removing the screws for the bottom logic board to loosen it, but that's all.
Click to expand...
Click to collapse
Wow that sounds pretty simple! and for you it all works perfectly now?? no calibration needed or problems?? Maybe I will try it after all..... but what screw drivers to I need to dissemble it?? the screws look different from normal..
Heronization said:
Wow that sounds pretty simple! and for you it all works perfectly now?? no calibration needed or problems?? Maybe I will try it after all..... but what screw drivers to I need to dissemble it?? the screws look different from normal..
Click to expand...
Click to collapse
Well, it's not that simple because simply getting the HD2 insides out of the rear housing is difficult if you've never done it before. I believe the screwdriver you need is a Torx T-5. Once you get the screws out, you will need a plastic opening tool to go between the digitizer and rear housing frame. They look like this:
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
I found it comes out much easier if I use the tool to make a gap along the top edge and then slide the entire end of a scrap credit card into that gap, then that makes the whole assembly easier to pry out along the sides with the tool. I know on one of the vids, the guy takes forever doing this part and I can understand why, but once I figured out sliding a credit card into the top gap as far as it would go, I was able to get it apart much easier.
I can't answer whether the phone will work properly, because I just ordered the new digitizer over the weekend and haven't put it back together. I did remove the LCD+digitizer assembly and then re-connected it and put it back, then powered on the phone just to make sure pulling the LCD didn't hurt it - it didn't, everything worked as well as it did before. I did manage to crack the digitizer more when I tried to get the insides out of the rear housing before I figured out the credit card trick, so fortunately I was not trying to save my digitizer as it was already cracked. If you are just wanting to try to clean or fiddle with the connection, then you're going to have to be a LOT more careful than I was because it was all too easy to crack the digitizer!
I'm guessing yours probably needs replacement though. I sent my HTC Surround in for a funny acting digitizer, and the digitizer was replaced.
Oh, and if I would have bought an LCD+digitizer pre-assembled unit, that would have been super easy to replace. However, I opted to save $50+ by buying just the digitizer. Not too sure how I'm going to prevent dust getting in it, and I've read thickness of the adhesive is critical. I may regret it later!
GnatGoSplat said:
Well, it's not that simple because simply getting the HD2 insides out of the rear housing is difficult if you've never done it before. I believe the screwdriver you need is a Torx T-5. Once you get the screws out, you will need a plastic opening tool to go between the digitizer and rear housing frame. They look like this:
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
I found it comes out much easier if I use the tool to make a gap along the top edge and then slide the entire end of a scrap credit card into that gap, then that makes the whole assembly easier to pry out along the sides with the tool. I know on one of the vids, the guy takes forever doing this part and I can understand why, but once I figured out sliding a credit card into the top gap as far as it would go, I was able to get it apart much easier.
I can't answer whether the phone will work properly, because I just ordered the new digitizer over the weekend and haven't put it back together. I did remove the LCD+digitizer assembly and then re-connected it and put it back, then powered on the phone just to make sure pulling the LCD didn't hurt it - it didn't, everything worked as well as it did before. I did manage to crack the digitizer more when I tried to get the insides out of the rear housing before I figured out the credit card trick, so fortunately I was not trying to save my digitizer as it was already cracked. If you are just wanting to try to clean or fiddle with the connection, then you're going to have to be a LOT more careful than I was because it was all too easy to crack the digitizer!
I'm guessing yours probably needs replacement though. I sent my HTC Surround in for a funny acting digitizer, and the digitizer was replaced.
Oh, and if I would have bought an LCD+digitizer pre-assembled unit, that would have been super easy to replace. However, I opted to save $50+ by buying just the digitizer. Not too sure how I'm going to prevent dust getting in it, and I've read thickness of the adhesive is critical. I may regret it later!
Click to expand...
Click to collapse
Ok thanks I think thats what I am going to do, first dissemble it then try to move the cable around because, just yesterday it started to work again and then today it isn't working. I will contact you if I have a problem or get stuck, if that is ok with you
Thanks a lot
Heronization said:
Ok thanks I think thats what I am going to do, first dissemble it then try to move the cable around because, just yesterday it started to work again and then today it isn't working. I will contact you if I have a problem or get stuck, if that is ok with you
Thanks a lot
Click to expand...
Click to collapse
Yeah, no prob. I can post a pic of the digitizer lifted from the frame which shows where the adhesive tapes are that you have to go through, if it would help.
GnatGoSplat said:
One word of advice I have, is just remove the LCD/digitizer module assembly and don't remove anything else.
I have no idea why these videos and manuals have you pulling circuit boards, flex cables, and disconnecting stuff just to remove the LCD module. All you really have to do after removing the rear housing is to cut through the double-sided tape holding the LCD module to the main frame, being careful to know where the flex is and not to go too deep there. I used a credit card for that, but anything similarly flat and thin should do.
Click to expand...
Click to collapse
Hey lolz I need your help already, I just took off the back housing and now Im lost on what to do... It looks to me as if you do have to remove the cables from the motherboard to get to it?? and what is the double sided tape? and isn't everything connected to the lcd?? lolz this is my first time doing any phone disassemble.. Thanks
added a picture of what I was thinking of doing... or am I doing this all wrong... because you did say we don't need to remove any flex cable or wires and stuff
Thanks!!
Heronization said:
Hey lolz I need your help already, I just took off the back housing and now Im lost on what to do... It looks to me as if you do have to remove the cables from the motherboard to get to it?? and what is the double sided tape? and isn't everything connected to the lcd?? lolz this is my first time doing any phone disassemble.. Thanks
added a picture of what I was thinking of doing... or am I doing this all wrong... because you did say we don't need to remove any flex cable or wires and stuff
Thanks!!
Click to expand...
Click to collapse
Nope, I didn't disconnect anything except the circled connector on the far right of your picture. You will need to do that to remove the LCD flex cable from the logic board.
I've attached a pic of the LCD module loosened from the frame. What you do is use something thin and flat to separate the adhesive tape holding the LCD to the frame. You will need to lift some of that black fabric tape on the edge to see where the LCD module meets the frame. Near the top, you will probably have to slide your separating tool all the way through to separate the tape (I used a scrap credit card). Avoid the area where the LCD flex cable is, because you could damage it! It's on the lower right of the LCD if you are looking from the front. When the LCD is loose, lift up from left to right (when LCD is facing you), pretending that there is a hinge on the right side. This is because you don't want to put any force on the LCD flex.
Once you've got your phone looking like my picture, you can remove the "captain" (orange tape), unlatch the LCD flex from the top, remove the button flex from its connector, then loosen the bottom logic board from the frame just enough to pull the flex out of the connector.
I hope that makes sense! It probably helps to know that a very strong double-sided sticky tape is all that holds the LCD+digitizer assembly to the frame, and there is only one flex cable connecting LCD+digitizer assembly to the rest of the phone.
GnatGoSplat said:
Nope, I didn't disconnect anything except the circled connector on the far right of your picture. You will need to do that to remove the LCD flex cable from the logic board.
I've attached a pic of the LCD module loosened from the frame. What you do is use something thin and flat to separate the adhesive tape holding the LCD to the frame. You will need to lift some of that black fabric tape on the edge to see where the LCD module meets the frame. Near the top, you will probably have to slide your separating tool all the way through to separate the tape (I used a scrap credit card). Avoid the area where the LCD flex cable is, because you could damage it! It's on the lower right of the LCD if you are looking from the front. When the LCD is loose, lift up from left to right (when LCD is facing you), pretending that there is a hinge on the right side. This is because you don't want to put any force on the LCD flex.
Once you've got your phone looking like my picture, you can remove the "captain" (orange tape), unlatch the LCD flex from the top, remove the button flex from its connector, then loosen the bottom logic board from the frame just enough to pull the flex out of the connector.
I hope that makes sense! It probably helps to know that a very strong double-sided sticky tape is all that holds the LCD+digitizer assembly to the frame, and there is only one flex cable connecting LCD+digitizer assembly to the rest of the phone.
Click to expand...
Click to collapse
Awesome I will try it now, I do need to heat the screen some for the tape to get sticky so I can pry it off right?? and I am guessing once you have removed that tape you can't "just stick it back on together and it will work right?? right??
Heronization said:
Awesome I will try it now, I do need to heat the screen some for the tape to get sticky so I can pry it off right?? and I am guessing once you have removed that tape you can't "just stick it back on together and it will work right?? right??
Click to expand...
Click to collapse
You could try heating; I didn't, but maybe it will come apart easier if you do. In the HTC factory service video, they mentioned putting the whole phone into the oven to loosen the tape. I didn't know if it would be a good idea to do that complete with all the circuit boards or not.
No, without heat, the tape is definitely ruined and I will need to replace it. I was planning to use some leftover tape I have from fixing iPhone digitizers so I didn't even attempt to salvage the existing tape. Not sure if it's even possible to salvage that tape considering you need to stick some kind of tool in there to separate it.
GnatGoSplat said:
You could try heating; I didn't, but maybe it will come apart easier if you do. In the HTC factory service video, they mentioned putting the whole phone into the oven to loosen the tape. I didn't know if it would be a good idea to do that complete with all the circuit boards or not.
No, without heat, the tape is definitely ruined and I will need to replace it. I was planning to use some leftover tape I have from fixing iPhone digitizers so I didn't even attempt to salvage the existing tape. Not sure if it's even possible to salvage that tape considering you need to stick some kind of tool in there to separate it.
Click to expand...
Click to collapse
Alright thanks I have to go and don't know when I'll be back, but I will try it tonight and hopefully I don't break anything...
Thanks for the help!
this goes out to people who have had any experience taking the hd2 apart, not interested in other comments thanks,
Basically im gonna rip it open tonight and attempt to fix my micro usb charger port, phone isnt being used i have a sgs2 now, so its no hassle if it dont work ill claim on my insurance, so looking for tips and advice on what to and what not to do when taking this beast apart please.
thanks in advance
cant send it to HTC because they already sent it back to me,
These are the YouTube videos I followed when I swapped my digitizer/LCD.
http://www.youtube.com/watch?v=cL-jnUKufC4
http://www.youtube.com/watch?v=t8Q7mXdcJ54
The only thing I encountered with my TMOUS HD2 is that one of the four torx screws that you have to remove to get into the unit has a "VOID" sticker that is exactly the size of the screw head and it came apart when I attempted to remove it. I don't know how this will affect an insurance claim if you pursue this yourself.
Also, pay close attention when moving/pulling wires. You have to put them back in the right order and pathways so that the phone closes properly. The volume up/down button is also a bit tricky when reassembling. I found it easiest to place it in the housing and keep it level so it doesn't misalign when putting the housing back on.
Good luck!
With the VOID stickers if you are extremely careful and steady handed you can remove them with a toothpick. What I did is take a toothpick and run it around the edges of the stickers to kind of loosen it up. If you are very careful you can kind of push the sticker around a little just enough to loosen it up then you can get the toothpick under it and pull up the sticker without tearing it. Just take your time it is not that easy but it isn't that hard either.
Aww man bsbokc, I wish I had you around when i worked on mine. I tried with a safety pin and I guess it was too sharp and it just tore right through it. I didn't think to trace the edge, I simply tried grabbing an edge and pulling across it. Fail.
A little heat might help soften the adhesive too. Just not too much to damage the phone though!
apalileo said:
Aww man bsbokc, I wish I had you around when i worked on mine. I tried with a safety pin and I guess it was too sharp and it just tore right through it. I didn't think to trace the edge, I simply tried grabbing an edge and pulling across it. Fail.
A little heat might help soften the adhesive too. Just not too much to damage the phone though!
Click to expand...
Click to collapse
I personally won't do anything with heat with my phones. But since I am posting here I guess I will ask you guys a quick question so I don't have to open a thread. Do all of the TMOUS HD2's have just one void sticker on the bottom right hand screw or are there two stickers each on the bottom screws?
I have a phone I have to send into HTC and I pulled one sticker from my myTouch but I thought there were two stickers on the HD2 can someone please look and tell me?
Just follow the videos carefully and pause often. Make sure you have all equipment and take
your time..
good luck
Thanks for the video links they were a great help
Sent from my HTC HD2 using xda premium
bsbokc said:
I thought there were two stickers on the HD2 can someone please look and tell me?
Click to expand...
Click to collapse
I've worked on mine and two of my friends' TMOUS HD2s. It's always been one void sticker on the bottom right (volume button side).
The simplest way of taking you phone apart.... Get a credit card... American express proffered because it is hard..... Use a rzor blade and remove void stickers careful.. Open scrues gently... Makesure not to leave any mark on the screw...... Take the credit card and force it in the joint on the right side of the headphone part... Then gently push borax from battery compartment area.... Also help you self a bit by prying the lcm with the credit card... Once it is out a bit... Do same thing for other side... Don't slide it to the other side... You may damage you head phone..... Once it is out a bit from top... Slide the card the sides until it opens up... Warning don't. Slide near the keypad.... You might damage the copper connector for antenna. And whether phone is out... You volume key will pppout too :F
Sent from my HTC HD2 using XDA App
Well guys I got it apart and back together,
little damage to the case trying to open it as it never went back together properly when it was sent away last time.
I would say, make sure you have a stiff plectrum (guitar pic) so much easier
take your time,
and if you get stressed take a break.
I got it all back together again, couldn't get a new micro usb connector on as the main board is screwed.