Change Bluetooth Profile - Tilt, TyTN II, MDA Vario III Accessories

I have bought a Plantronics 815 Voyager Headset. I have paired it with my tytn2 but the only profile that I can choose is Hands-Free!
The headset doesn't ring with the phone melody, only beeps. The volume is very low compared with tytn volume. When I pick up on the phone, not the headset my ear is going to explode, becouse the volume is set to highest level.
1. How can I change the bluetooth profile, so that my Headset rings like my phone!
2. How can I set the volume in my Headset to be as loud as my phone!
3. Why does it take ca. 5 sec after picking up the headset, to start a conversation! ()
I have tasted this Headset on Nokia 7373 and the Headset rings like the phone and after picking up the conversation could start immediately.

alop said:
3. Why does it take ca. 5 sec after picking up the headset, to start a conversation! ()
I have tasted this Headset on Nokia 7373 and the Headset rings like the phone and after picking up the conversation could start immediately.
Click to expand...
Click to collapse
i have a jabra bt500 and have the same issue. I don't know if its phone realted or headset related.

Related

Making the phone ring while BT headset is connected

I am using the Bluespoon AX with the JasJar. It uses the hands-free profile.
The most annoying thing is the phone does not ring when the headset is in connected mode. It makes the headset ring, but that requires me having it in my ear all the time.
Is there a registry setting or something that will make the phone ring as well?
I'm using a Jabra BT200 and my headset rings as well as the phone when I receive a call, which is effectively what you're looking to do.
Anyone else have theirs do this already?
I have the Moto HS850 - phone rings as well as headset with an incoming call

No Ring Tone when Using A2DP - Bug or By Design?

Greetings,
I'm using a Sony Ericsson HBH-DS970 stereo Bluetooth headset with my TyTN and so far I have only one gripe - when the headset is connected, the ring tone somes through the handset only, not the phone itself, which means that I'll miss any incoming calls if I don't have the earbuds inserted.
Also, the ring tone sometimes does not start until about 20 seconds after the display has started to announce the incoming call.
I tend to have the earbuds hanging from my neck if I'm not listening to music, and the ring tone is not loud enough to be heard that way.
I suspect this may be by design, because it's assumed that a stereo Bluetooth headset is always in/on the ears when connected to the phone, but I want to use the 970 as my only headset even when I'm not about to listen to music.
Is there any way to get a ring tone from both headset and phone?
/POL
?
Anyone figure this one out yet? I have the same problem...
same here, anyone find a solution please post, I think I can change it from the registry I will check it.
Can I ask you folks a question relating to the use of the headset Sony Ericsson HBH-DS970 with the HTC Hermes...do you get all the functionality ie caller ID, the ability to accept and reject the call, compatible with mediaplayer etc.
I have a concern that with the headset not being a HTC product, perhaps some of the Sony functionality may not work with the handset.
Thx
From my experience the ringtones will not come to the speaker if you use the headset as wireless stereo. I only use the headset as handsfree, which makes the ringtones go through the phone.
I used the DS970 for two week with my O2 Trion,feature like Caller Display is No any problem,But when using media player sometime it may out of control, like cann't accept call and control volume or stop.
And the sound quality is acceptable,but it will stop few second after 1 or minutes, I have change the regedit.
May I know is there any way to fix it?
Still no solution?
Anyone come up with a solution to this problem? It really bugs me not to get a ringtone from the unit itself, just thru headset... Works just fine with my old mono handsfree, would be great to have it in the stereo heaseat to...
i have the same problem
hello i have the same problem
the ring sound is only on my headset i have tested with 1.13.097fr and now 1.13.234fr if anybody have the ring on the phone with a headset stereo a2dp cang give us is configuration rom and other soft for the bluetooth.
thank and sorry for my english
juste a little frenchy
There seams as if there's no solution in sight, I got the exact same problem, also with HBH-DS970 and with Jetware Mobile's "Hands-free extension" installed.
I'm still running WM5, anyone who have tried WM6?
/Fluff
Same "design feature" here with my HBH-DS970 and HTC S710 WM6 Smartphone, so it's not ROM, device or OS version specific. I would suggest this is by design.
I'm pretty sure this is by design since thats how it works on my BT8010. Its stereo so it seems to make sense all sounds go through headset although it would be nice if it was an option. The BT8010 has a button on the headset to take it out of music mode so then they will go through the phone but I guess that doesn't help any of you out much.
Another option would be to just uncheck wireless stereo in the pairing and just check it back when you want to do wirelss stereo.

TyTN II and the Jabra 320s Stereo BT Headset

Well, just got my TyTN II. For me it is worth the upgrade from the TyTN.
I have only one issue. My Jabra 320s headset is about 30% lower in recieving volume than it is on my TyTN I. On the original TyTN, the volume was just about right, any lower and it wouldn't be usable, but now that I am running it on the TyTN II it is un-usable at such a low volume.
My question is this?
Is this issue fixable through software/registry etc...
And does anyone have any idea how I can fix this?
JB
That's the big question, low BT headset volume when calling is a consistant issue with most headsets on Kaiser vs Hermes. Time to email HTC support, it's a bug.
lol no problems here. Using Plantronics Voyager 510SL.
Even if it's a bug with the Kaiser, (Probably software) we won't see any fix from HTC anytime soon. That's why I am asking the pros over here at XDA if there is a software/config workaround/fix that can be implemented.
JB
nuclear said:
lol no problems here. Using Plantronics Voyager 510SL.
Click to expand...
Click to collapse
ditto... while i'm not using the 510SL, i am using the 510 and it's quite loud with my Kaiser..
I found my problem and fixed it...
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Buzz313th said:
Ok, I'm an idiot... I fixed my bt headset issue with low recieving volume. Through my haste to try and fix the volume issue, I missed one key setting... I forgot to click on the small speaker icon on the top right of the screen and push the volume sliders to max.... Apparently, I only tried to use the jog wheel alone to raise volume and that works, but seems to work seperately from the volume icon levels.
So for me... I have the same volume levels I had as before with the TyTN I.
JB
Click to expand...
Click to collapse
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
Yes.. I had the same problem...
This may sound rediculous on how I fixed it, but it worked.
I paired my laptop and the Headset and then tried to listen to stereo music, and also paired the phone with the laptop and then it would pair correctly with the Jabra bt320s.
It seems to me that the kaiser has a few BT bugs that need to be worked out, and that different pairings will change either reg settings or configs that arent available to the UI...
JB
RemE said:
Sorry, this raises the volume in the BT headset for all "system" sounds like voice dial confirmation talkback to the headset, but the in-call volume remains lower than Hermes once you are connected, the slider has no effect. To be clear, if you adjust the slider while NO call is in progress, the volume in the headset will be affected, but after connection the sound volume remains low, no matter how you left the slider from before.
Click to expand...
Click to collapse
]
You are correct and I am still having low BT call volume, but at the time I was having low BT stereo volume as well. The sliders fixed the stereo problem, but didn't fix the BT call volume.
I haven't tried the fix yet, but I believe someone claims to have fixed the BT call volume with a cooked rom or a modified rom...
I'm not worried that we will have this fixed sometime soon.
JB
ronaldlokers said:
I have another problem with this headset, I don't get the "stereo" service. The only thing my kaiser recognises is the "handsfree" service.
Does somebody now how I can make it work?
Click to expand...
Click to collapse
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
jspohn said:
I am using my Motorola HT820 BT headset without any issues since day one. I simply paired them, and made sure Stereo Headset was selected in the bluetooth options, and they just work. Volume and Track changes from the headset also work great. One thing I never liked about the HT820 was it's range, just about 20 ft. I used to have it paired with my laptop, but no longer since I have 4G of music on my phone....
Click to expand...
Click to collapse
I bought a plantronics pulsar 260 and that one works too. In the shop they told me that jabra has much problems with their bluetooth headsets!
pepeto2001 said:
how long does the kaiser battery last listening mp3 throught bluetooth headset?, anybody tried it?
will it drain battery MUCH faster than using included headset?
Click to expand...
Click to collapse
I don't really have any idea, since I charge it nightly. I normally leave the BT on all the time anyway.
Strange problem with handsfree mode
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
HasC said:
Hi guys,
I have just purchased the Jabra 320s and was happy with the stereo quality and apart from the low volume issue on handsfree calls were handled quite well through the device.
Once, When the phone rang, it was answered by my wife using the phone answer key instead of the Jabra's answer button and since then I cannot answer calls through the Jabra. I have tried the options on the Kaiser whilst on a call to have the call transfered to handsfree but that also does not work, I have tried resetting and re-paring both devices and it still does not work for calls on handsfree (once paired, I have the handsfree option and stereo selected). The stereo is however working fine without any problems when playing mp3's.
Any ideas?
Click to expand...
Click to collapse
Did you solve this problem, I just bought the 320s and am experiencing the same issue?

Wing and Jabra JX-10 Bluetooth Headset

OK I just bought the most expensive bluetooh headset man can find the Jabra JX-10 hoping that I will not have the same problems I have had with all other plantronics and other head sets.
The headset paired and (I guess its connected, there is no indication on the screen)
Here is the problem:
When I make a call, I see the headset logo on the dialer screen. The voice however comes from the phone, not the headset. Then I have to I push the CALL button on the headset to TRANSFER the call. (If my timing is not perfect and I push the button "before" the call is actually CONNECTED and there is someone talking, the phone will simply HANG UP.
Can the phone just send the calls to the headset at all times (unless I am in my car that has bluetooth?)
THANKS FOR ALL THE POSTS!!
I uninstalled touchflo and un-paired and re-paired the headset and it is working properly now.

Still same sound in BT headset

Hi guys,
I have a question about BT headset.
I have a JABRA BT 8040 connected to my HD2. When my phone is ringing I still hear the same sound in BT headset( like ..turut-turut..) doesn't matter how the phone is ringing/what ringtone I using. I also using this headset with my workphone Nokia 3110c and on that I hear the same tone in BT like its coming from phone speaker.
Any idea where is the problem? Why can't hear the HD ring sound in my BT headset?
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
starstreak said:
I think the sound you hear is the Microsoft Voice Command ring sound. I use the MSVC ALOT so I don't want to turn mine off, but try and turn off yours and see if that changes the ring sound in your earpiece.
Click to expand...
Click to collapse
How can I switch off the MSVC ??? couldn't find any option for that.
I have a Energy ROM and I just can't see that

Categories

Resources