Hi I'm running Jwrightmcps Crossbow 2.12.08 with radio 1.18
I'm experiencing a problem that every now and then the radio starts searching for a signal. Radio 1.15 also did this, but 1.18 is a bit more stable.
Rom is fantastic - what i need now is a stable radio!
Any ideas on how to overcome this problem?
Thanks
Calli
same problem!
I am also having this problem. I thought it had to do with the ROM update so i tried flashing a different one but i keep getting error messages. Anyone with any tips on fixing this radio problem.
No one seems to take notice of this Post.
Maybe they consider UNi past its sell by date? Yet it still has legs - if only we could get the radio right!
I had massive problems with Radio 1.18 and actually made the effort to place a post with description, symptoms and the resolution.
Please use the search and you will find it.
Basically, i downgraded to Radio 1.15 and have not had problems, since.
Cheers,
vma
Thanks I'll try to find it. The reason I went to 1.18 was that 1.15 gave me the same problems.
Related
Hi there,
Anyone tried just upgrading the radio stack?
My xda already has the latest UK rom version 3.14.13 (it was bought in March) and its Radio version is 4.08, so hence my question...
Can anyone offer any advice? - as it appears some people have had problems just upgrading the radio stack.
Common sense would dictate that this should work, but hey, we're talking Microsoft products! :lol:
just done it ok... the process goes smoothly, and doesnt seem to need a "cold" reset.
Hi derekcfoley
I've done it from 4.08 to 4.14 to 4.16. No problem.
I do not see much diffrence though.
I used always the rsu from the web.
:roll:
Hi, I've been using Uni with BL+ and Radio 1.17 quite a while and it worked good, but after I switched my operator to Orange PL i have noticed that my device often hangs, even on incoming call, making it impossible to answer, mainly the phone module seems to work ungood and hangs the whole unit... what can I do? Should I flash my radio to another one? If yes, which one would you recommend? 1.15, 1.18 or 1.09? (or something else)?
(Videocall doesn't work either, it worked with my previous operator.)
the 1.18 is very bad radio 1.15 very good 4me thats main which rom you have you must be tested all on your rom
Ok, I just picked up this phone and am having major problems with the Radio reception.
Peoples phone calls either go straight into my voicemail, or I receive the call put reception is broken, I can hear a word or two every few seconds, and the other person cannot hear anything.
I'm on Rogers in Canada, anyone using this phone in Canada or on Rogers can advise which radio rom to use? I have flashed at least 6 already, even the Murata one and still no success... any help or suggestions would be great.
Just flashed the original back WWE_3.13.405.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe and its a tiny bit better, where it doesnt go straight to voice mail, but reception is horrid still, inaudible.
try flashing radio 1.59.44.02... then hard reset see if that helps
Hi Lokosis,
Your signature does not give an idea of which ROM you are using. However how's the reception on your other phone (elfin)? Are you using it on the same network? Since you have already used 1.59.44.02; try going back to 1.60 ROM and a Murata Radio.
Hi 02xda2, well I'm using the PDAVIET Rom, which is 3.18.457.46, which I thought I had in my signature. The reception on my Elfin is 100% and have never had a problem, but when using the same sim card in the Polaris I'm having those major issues. The Polaris is CID/SIM unlocked already using Oli's HardSPL. I'll try flashing the 1.60 right now with the Murata and reply with results.
tvrtim said:
try flashing radio 1.59.44.02... then hard reset see if that helps
Click to expand...
Click to collapse
That's actually the first Radio I had installed, and had no luck at all with it.
UPDATE #1: Just tried the with PDAVIET V30 CE OS 5.2.20748 (Build 20748.1.4.0) along with the Murata 1.58.21.23 Radio, same problems as mentioned before. I'm also going through Settings>Phone>Band and changing it to GSM, but still the problems remain.. any suggestions?
UPDATE #2: I'v flashed the RUU_Polaris_HTC_RUS_1.25.411.1_radio_sign_25.65.30.04_1.58.21.23_polaris_murata_Ship.exe rom as suggested in another thread, and managed to get perfect sound received, and decent sent. Unfortunately I can't read Russian, so I managed to get the RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe which is the WWE counterpart to the RUS version, tried it with the stock Radio and no luck, flashed the Murato Radio onto the WWE and it was back to horrible.
UPDATE #3: So the only solution right now is the RUS rom, but I can't function with that as I don't read Russian. So running the HTC RUS update with radio, then flashing a new WWE rom without radio on top will work. Also atl4ntys's suggestions (below) most likely is worthy of a shot as well .
This phone being a bit aged and maybe out of warranty, how is HTC with their warranties/repairs?
hey Lokosis, have u tried c_shekhar's rom? its extremely stable, its wwe and also includes radio. u find the link in my signature. if the radio that comes with it doesn't do the job 4u then upgrade to the latest 1.58 available: http://forum.xda-developers.com/showthread.php?t=479306
If still bad signal then the only thing I can say is to falsh the original spl rom and radio and send it in for repair.
PS: Make sure u flash without the micro sd card in it and hard reset as soon as u see the config screen after u flash. good luck!
I have installed this radio and now under command manager I can't activate wi-fi since the button is now greyish. Actually the wi-fi works if activated from setting but it's still annoying. Is there a way to fix it or is just a radio issue?
Rom: Kostas244_ROM3g_23016_FINAL_B1
First say hello for your first post and give us more detail about your configuration.
SPL ? ROM ? old radio ? version ?
Oh, sorry about that. I registered some month ago so I though I had alredy made some post here...Let's start all over again
Hi everyone this is my first post here and I need some help.
I just upgraded my Polaris from 3LIT3 VI (Windows 6.1) to Kostas244_ROM3g_23016_FINAL_B1 (Windows 6.5). Everything was working fine until this morning when I upgraded my radio from 1.65.30.09, that was included in my old ROM, to 1.59.46.12.
The problem is that I can't activate wi-fi from the command manager anymore because its button is now disable but if I use the connection settings to activate it everything works.
Any idea to fix this issue?
Known problem, which might sometimes occur. Try to Hardreset
once or twice and most likely the Wifi button will be available
again as sudden as it greyed out. Once it's working it will
stay working.
Olioaglio
Thank you!
After one hard reset I got back the wi-fi button. Anyway I think a sticky thread about radios with their problem and feature would be great .
What is the diffence between these two radios 1.59.42.15 (my current) and 1.59.46.12? I read that 1.59.46.12 was newer but is it recommended to upgrade? Are there any benefits to signal strength or the like?
loggie1 said:
What is the diffence between these two radios 1.59.42.15 (my current) and 1.59.46.12? I read that 1.59.46.12 was newer but is it recommended to upgrade? Are there any benefits to signal strength or the like?
Click to expand...
Click to collapse
You can upgrade and see for yourself what radio version is best for you and your location....From 1.59.46.12 you can downgrade easily to your previous radio if it's not good for you.
kostas244 said:
You can upgrade and see for yourself what radio version is best for you and your location....From 1.59.46.12 you can downgrade easily to your previous radio if it's not good for you.
Click to expand...
Click to collapse
I'll give it a try so. Thanks Kostas
Hello,
I have a question and I could not find the answer in seach thread
I have bought Touch HD 3 months ago and since then I can not make or recieve phone calls outside or indoor, but it works always good when I am only at home don't know why? Currently I have (SPL 1.56 / Radio 1.10.25.25 / Energy Rom 6.5 sense 2.5)
I have tried tons of diffrerent rom versions and also radio versions but did not fixed my problem. Friend of mine have same phone and his works every where he goes without any missing calls or any other problem, and we both are with same service provider in Canada (Fido). Some one said it could be my SPL version problem with olinex 1.56 and suggested that I have to revert back to 1.54 with stock OS as well. IS THIS TRUE?
Please reply how can I fix this problem?
Thanks
If i were you, I would defenitely us a newer radio than 1.10. Are you sure 1.17 doesn't work better? As far as I know, your Rom doesn't have much to do with reception problems. My knowledge on this is limited, but from what I understand your rom should have a rillphone installed that matches your radio. More information on this subject here. Most roms these days have a rillphone that matches radio 1.14/1.17.
What radio is your friend using btw?
I really appreciate your suggestion, I will definately check with my friend for what radio version he is using in few hours, and I will post it shortly. I have never heard about rillphone? I will definately check your link and all the help from any one is really appreciated. I really like this phone and want to get it working.
Thanks
Can I copy my friends HD rilphone.dll file and replace it with my one in windows directory? Will that brick my phone? As I said in my first post that his phone works fine with same network provider.
Thanks in advance
My friends HD radio version is..
R 1.13.25.24
G 52.62.25. 34U
D 1.59.48753
Windows 6.1
I have tried Rilphone 14 and radio 14 but same problem presist, can't really make calls (works 3 times out of 10) also hard to recieve calls, However text messaging is got better, I am missing only 1 time out of 10.
Any help is really apreciated.
Thanks
Could you flash the same version of radio & rilphone as your friend's. This way you can rule out any possible hardware problems? - just a thought.
Thanks Surfwarrior for your suggetion,
I downloaded radio same as my friend's (1.13) however i could not found the working Link for 1.13 Rilphone. The Rilphone 1.13 link in the raido rom thread is not working.
Any idea where else can I get 1.13 rilphone?
Thanks
I have tried flashing Radio 1.17 and Rilphone 1.15 but same problem presist.
I also tried x1 radio but did not let me flash
I am still waiting for someone who can tell me where can I download Rilphone 1.13 cab. The original link for rilphone 1.13 cab is not working
Thanks