Related
Wazzzzzzzzaaa???
This is my first C# util!
It facilitates ExtRom update process. All you need to do is to put your cab files to Ext and run this utility, then the utility will create Config.txt at Ext with all cabs specified as "CAB: path2cab". If you need to get your original Config, then check ConfigOld at Ext
C# Programmers let's unite!!! ))
ps: the utility is not verbose one, so you won't see any messages & lame stuff. If you see something, then there is a problem
that's good boy! will try it l8r..
THANKS!
Man, wher z feedback?? Did u try it?
Yo,
boobee said:
that's good boy! will try it l8r..
THANKS!
Click to expand...
Click to collapse
Boy, hope you finaally tried it! And try this one also. This is my 2nd C# util
Shortly what it does:
UnZips your files with consecutive registry values (reg V4) import and splash writing
It means that you can zip all your files to one file called Setup.zip and place it anywhere (storage/ext). After hard reset, the utility is called and it extracts all your files and restores your favorite registry settings (saved to Setup.reg) and writes your splash.
btw: read za manual !
ps: the concept is the same, if u see somethin' then there is a trouble
Re: Man, wher z feedback?? Did u try it?
Attention!
The file was re-uploaded, so there mustn't be any CRC errors now
System Requirements
Regarding system requirements, the program needs old version of ER\Autorun.exe that understands ER\Config.txt
Program was not tested on XDA1! It was partially tested (w/o hard-resets on XDA2 / 1.72TM
Version 1.1
Wazzza!
Here is a new version of Restorator utility. The new features are:
+ now it deletes content of \My Documents;\Windows\Start Menu;\Windows\Startup folders (as people wanted
+ TimeZone offset is not resetted anymore
Note:
Make sure you have prepared your customized Start Menu (!!!) and Startup (!!!) folders, otherwise you won't be able to see Programs after hard-resetting your device. Please, check the attached sample to prevent yourself from having problems with this utility or use version 1.0 that don't delete anything
Umm... could anyone translate this into English for me?
I don't even understand the title of the thread.
In another thread, SP says that one of these downloads will retrieve data back on hard resets. Sounds like a useful tool, if only I understood what the hell these posts mean. :lol:
For Ben
sublimatica said:
Umm... could anyone translate this into English for me?
Click to expand...
Click to collapse
Here we go...
(assuming that you downloaded 'RestoreItV1_1_PPC.ARMV4.CAB' & installed it to your device)
This program is designed to restore your files, folders and registry settings from a ZIP-format archive and it can also write some splash screens
For this purpose, you need to make a ZIP-format archive with files & folders you want to get restored after hard-reset. Just run your favorite pocket zip archiver (for instance PocketRAR) and archive those files & folders that you want to see after hard-resetting device. Name your archive "Setup.zip" and place it to one of the following places: storage, storage card or extended rom.
Before doing further instruction make sure you have unlocked your ExtendedROM using ExtUnlocker.
If your rom is unlocked try to run the utility from \Storage\RestoreIt. If you had no messages after running it, then the utility installed itself successively. And your files & folders placed to 'Setup.zip' will be restored on next hard-resets.
If you're interested in restoring registry settings, then you need to get pocket registry editors that support exporting/saving to .reg files. After saving your favorite registry settings you will need to combine them to one .reg file and name it 'Setup.reg'. Then, you will need to place it to your archive's root folder (aka '\') So, you will have a file 'Setup.reg' placed to the root folder of your 'Setup.zip'. That's all folks
I strongly recommend you to see sample 'setup.zip' & 'manual.txt'
DON'T FORGET TO PUT YOUR CURRENT '\WINDOWS\STARTUP' & '\WINDOWS\START MENU' FOLDERS TO YOUR SETUP.ZIP!!!
You're welcome to ask me questions anytime!
Aaah, OK. That makes more sense
Sounds like a handy little tool then. Might have a play later.
Thanks, SP!
RAR-support
Is there anyone who is interested in rar-support for restorator?
Attention: Restorator v1.0 & 1.1
Attention: Restorator v1.0 & 1.1 are originally supported by I-Mate 1.72! All you need to do here is to use Extended ROM unlocker prior to running the utility
Feedback
Any feedback so far?
SP,
Restorator seems like a winner!!! I have been hitting my head on the rocks for a while trying to script a recovery using nscriptm as a scripting tool to call cab files which I keep on a storage card. Looks like using your tool a lot of the tedious scripting can be simplified by simply copying the files where they need to go. The challenge is knowing exactly what to copy & where... Is it possible to add the ability to call CAB files to your already excellent utility?
I am imagining putting all the CAB files in say a folder like \CABs in the Setup.zip and then having Restorator calling them one by one after finishing off with all else that it does. Can this be done? Additionally can you add ability to call registry imports at two points? You may wish to call registry import at the beginning and once more at the end after all cab file execution has been completed. This would be useful to restore application settings etc which the cab execution would overwrite to default. You would obviously need to keep two .reg files in the zip file. Does this make sense?
Thanks once again for all your efforts. Regards
Hi Mate
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
SP, thanks for continuing to work on this utility. I am waiting eagerly for your next update. I will set it up and test it with a hard reset so we can see real outcome. Let me know when ready please. Thanks
Re: Hi Mate
SP said:
k_kirk said:
SP,
Thanks once again for all your efforts. Regards
Click to expand...
Click to collapse
Thanks for your motivating feedback.
I'm planning to put your features in 3 to 5 days...(hope to get some free time on these days).
And more ideas and recommendations are welcome!!!
SP
Click to expand...
Click to collapse
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Re: Hi Mate
Hi SP, this utility sounds great. Does it work with the XDA I as well????
Click to expand...
Click to collapse
Unfortunately I don't have an XDA 1 device at my disposal and I'm unfamiliar with its tech info.
What happens when your xda1 is hard resetted? Does it install cab files? or does it run any configuration software?
If there is a such software (on XDA2 it is autorun.exe placed at ExtendedROM), then you must specify in the runner (which starts on hard-resets) the call to the restorator utility
Looking forward to assist you in porting restorator for XDA1 devices
Cheers
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Restorator V1.2
k_kirk said:
Hi SP. Just dropping by. Any news on new version of Restorator? Cheers.
Click to expand...
Click to collapse
Sorry for the delay...
I'm having lack of time now, thus I couldn't test it very well . Just let me know if you found some bugs...
Now you can create "\CABS" folder and place your cabs there. They will be processed after extraction and before registry import. So, you don't need to have two .reg files then.
I'm looking forward to your new ideas!
ps: another attachment is a set of registry settings splitted by .reg files. I'm using them to get my setup.reg. Just change what you need, delete some of them and run "make.bat". It will create setup.reg with all your settings.
btw, check out "Usher_-_Yeah_[44k].wma" & "Maroon5_-_This_Love_[64k].wma". Home-made ringtones ;-)))
for those who hadn't used Restorator before. !!! DON'T FORGET TO PUT YOUR "START MENU" & "STARTUP" FOLDERS TO THE SETUP.ZIP !!! AND READ DA MANUAL!!!
Cheers
SP,
I tried the Restore-It utility today and found that the earlier functionality of copying files & importing registry etc from setup.zip works quite well.
The \CABS folder was also restored onto my device so I guess thats an indication that my setup.zip file was contructed properly. I am sad to report that none of my cab files were triggered by Restore-It though. I think there is a small bug thats holding back this behaviour.
Your kind assistance to check & correct this will be most appreciated.
Thanks & Best Regards
the way to OS Localize your Universal
*****the files and tools you need*******
*imgfs_tool by mamaich
*boot_hv_tool by mamaich
http://forum.xda-developers.com/viewtopic.php?t=34171&start=0
*HTC-64 Encodetool by bal666
http://forum.xda-developers.com/viewtopic.php?p=191164#191164
*hex editor (i used Heiw32 accroding to suggestion of Mamaich)
*NotePad in Windows
*Other high performanced Editor(if you have)
*Resource Hacker or PE Editor + Resource Tunner to edit mui
*Signcode.exe and sign with certificate
-----sorry can not write all in here,,, pls go to link---
http://www.asukal.jp/WM5_MUI/the way to OS Localize your Universal.mht
***********additional information 2006-May-15**********
regarding to initflashfiiles.dat and initboji.dat
i tired to write initflashfiles.dat in Japanese chalachtor, but not in CODE,
seems to work.
*write initflashfiles.dat in Japanese to specify Japanese Localized shell folders and Japanese re-named Short cuts. then add into rom.
also deleate both of 2 old dat files from rom.
then flash it back to my Uni, the localized shell folders were created!
this can save a lot of time to create the Localized ROM :shock:
But,,, still testing that ROM can work correctry.......or not.
<some appurication buttons can not assained if without initboji.dat>
*************2006-May 22 aditional********************
@ to edit the dll or exe from AKU2 rom, they have some difference.
Strings can be edited only with Platform Builder now.
pls reffer to this thread
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
Can I have your instructions?
Hi Asukal(sama):
I'm trying to localize my Universal to my local language.
I'm stuck now before boot set-up process after hard reset.
So, I would like to ask you several questions.
Could you show me your instructions / suggestions?
1) Certification Store (way 2-1)
You said I have to take out CertificationStore from registry file.
I could not find any key of "CertificationStore", so I compared my registry before and after SDK_Cert installation.
I found there are some differences in registry file, which are:
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\SPC\Certificates\XXXXX] –- 3 keys
HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities\Certificates\XXXXX] – 3 keys
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Unprivileged Execution Trust Authorities\Certificates\XXXXX] – 2 keys
I removed "\" that locates on each line of hex data and write these keys on default.hv file.
However, the start-up process just after hard reset didn't start...
I also found some other differences on registry files, which seems certification file update time.
Do I have to put update time keys on default.hv file?
Or am I still missing something?
2) MUI (way 2-2)
I could sign *.mui files with SDK_Cert.
You said PE header must be corrected if I cannot sign *.mui.
In other words, you mean I don't have to correct PE headers because I can sign my *.mui?
As far as I checked my *.mui files, it seems OK.
3) iniboj.dat (way 3)
I could dump iniboj.dat and initflashfiles.dat and translated them to my language.
Of course I saved in Unicode (UTF-16) and removed the first 2 byte "ff fe".
When I run "delfile.exe", I noticed "delfile.exe" showed the error message that "delfile.exe" could not find iniboj.dat.
But I could add iniboj.dat with "addfile.exe".
Is this a normal message from "delfile.exe"? FYI, my base ROM is Qtek's AKU2; 1.30.77.
4) *.hv files (way 4)
I think the following is the keys that I must change.
[HKEY_LOCAL_MACHINE\System\Explorer\Shell Folders]
"StartUp"="\\Windows\\StartUp"
"Recent"="\\Windows\\Recent"
"Programs"="\\Windows\\Programs"
"Favorites"="\\Windows\\Favorites"
"Desktop"="\\Windows\\Desktop"
Even I changed these keys, I cannot start my start-up process...
Are these keys enough to start start-up process?
I appreciate any suggestions / supports / instructions!!
Thank you.
hi! Camrade!
Re Qeuestions
1;certificate sotre. 3 entries are correct.
@But i am not sure what you removed???
i did not remove any thing and copy it to HV.
@yes update time must be in HV also.
like follows.
without this. no work as sertificate authentification.
[HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates\Privileged Execution Trust Authorities]
"UpdateTime"=hex:\
00,e0,46,50,1c,96,c5,01
2;if your mui can be signed, they should be workable.
but i am afraid your mui of core-dll Strings Table were broken.
PLS reffer this thread about that!
http://forum.xda-developers.com/viewtopic.php?t=49423&highlight=
if you are not sure, pls send me one of them to check it.
3:re-iniboj.dat, as you told me the eror message of delfile.exe will notice you, because i doesnt exisit in rom files. it was in XIP area.
But dont mind that. procceed it!
4;Shell folders; that is enough in hv, to just specify the loaction of Shell folder.<this also discribed in shellres.dll.
But no start up menu if there were localized Shell folders by failed initialized 2 dat files.
@the os can boot even the shellres.dll.xxxx.mui is not worked,
just missing Programs in StarMenu.
Now i am afraid your shellres____mui is read by OS, but it was incorrect.
@to change the Dr.Johnson screen to Japanes one, replace "stylus2.192.gif" and "stylus1.192.gif" with ones from JP os.
But the fisrt sentence before Stylus work for Dr.Johnson is from Shellres.mui, so your are failed in to read shellres_mui if it was still english.
Good luck!
Almost completed
Thank you, Asukal!
With your responses and instructions, I can finally boot my Universal with my language from boot screen!
I’ll make init*.dat file and try to make more localized ROM.
It seems a little difficult (complicated) to make initflashfiles.dat file translating to Unicode character code. But I’ll try!
Again, Thank you very much!!
shugoh
pls try to write iniflshfile.dat in Katakana, instead of Code,
i did try this some part of them just now.
Seems to be worked. But not sure .........didnt test all of in this dat,
just a part of it.
if the Katakana written dat was workable, it will be so easy to create
the Shell folders in Japanese................ :lol:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
chris_khho said:
Hi Asukal,
I also want to join but I don't have the hex editor....the process is so complicated and the "key" is we have you on this website that do cook the ROM for us. Thanks a lot again.
If you have invented some easy installation files that want me to try, please let me know. I tried to edit the latest O2 ROM but unsuccessful....
Cheers,
Click to expand...
Click to collapse
free hex editors can be downloaded.
many kinds of hex editors were in web.
Anyway, if i need something need test, i will call u! :lol:
Hi, Asukal:
This my be very stupid question...
I could translate html portion of shellres.dll with your instruction.
However, I still cannot do of tapres.sll and tshres.dll.......
Maybe this is because the type of resouce is different from shellres's.
So I tried to move html of tapres and tshres to another resources using PB because the other tools I have doesn't work...
When I wanted to save modified resource on PB, PB said I could not save the new resource because PB could not load resources from executable file...
I know this question is the basic one if I want to use PB.
But if you can show (a) hint(s) to me, I would appreciate your support very much.
Thank you!
shugoh
i guess PB can only save the files as "*****.exe" or "******.dll",
but not as a "******.dll.xxxxx.mui"
so you must save it as "anyname_you_want.dll" with out xxxx.mui to other folder.
then go to next step, because files edited with PB can not to be signed.
To enable to be signed, go following steps.
1;Open "any dll" or exe which havs correct PE header with Restorator.
2;Dlelete all of resources from this dll or exe.<make empty dll>
3:On another window of Resotrator ,
Open "anyname_you_want.dll" edited and save by PB
4rag and drop all resources exept "255" resource from
"anyname_you_want.dll" to "empty.dll"
5;save this empty.dll filled with resources of "anyname_you_want.dll",
as the name of your tagert xxxx.mui
6:Close all windows of resotrator.
7;try to sign on that mui, you may able to sign on that!
Good luck
Thank you for your instruction about PB and html.
however, I still cannot save modified file even though I put file name with *.exe or *.dll.
As my test, I opened x86 file and modified its file and I can save the modified. But still cannot tapres and tshres.......
I also tried some WM5 files, but not succeeded in saving it...orz
I installed all PB functions but for MIPS or SH4, which should not necessary for WM5.
The attaced is the error massage appreared when I wanted to save modifed WM file. (I installed Japanese PB, so error message is in Japanese)
"ta.dll" is only a temporary name for modified tapres.
I appresitate your any comments.
Thank you.
shugoh
I did it!!
Asukal:
I finally can make localized tapres and tsh with your recommended tools!!
Please see my blog at your convenience!
I'll try to localize folders with init*.dat files!!
Thank you very much!!
(If I have difficulties on making init*.dat files, I may ask you suggestions after I make every effort I can make,)
Thanks again
shugoh
Hi, Asukal
I can localize init*.dat file according to your post on May-15.
As you said, it seems OK that we can describe folder names on both *.dat file, not Unicode Code #.
So far I have no trouble with these *.dat files.
Thank you.
shugoh
Glad to here that!
You have done! you r a MAN!
Keep on going Dark Side!
Hello, Asukal
I'm back...
I have had a strange problem. As a matter of fact, I haven't solved this problem even though I could make Universal ROM in my language.
When I make my Universal hard & soft reset, I always see 2 white bold lines above and below "Windows Mobile" on 2nd splash screen.
I found these lines don't appear when I change mui regional setting. I mean no white lines on 2nd splash when I change:
1) shellres.dll.0411.mui to shellres.dll.0409.mui
2) shellresapps.dll.0411.mui to shellresapps.dll.0409.mui
(I'm trying to change English ROM to Japanese.)
0411 and 0409 have exactly same contents; I just change their name and place them on "windows" folder.
3) Change mui setting both of the following from 411 to 409.
[HKEY_LOCAL_MACHINE\MUI]
"SysLang"=dword:00000411
[HKEY_CURRENT_USER\MUI]
"CurLang"=dword:411
With these changes, I can boot my Universal without white lines and Uni seems working well. (Of course, all letters except for the ones in these 2 mui are in English. But I suppose I can see Japanese if I change all 0411.mui to 0409.mui. (Haven't tested)
I also noticed I didn't change the region code in init*.dat. (i.e. LOC_0409_DIRWINDOWSHELP, not LOC_0411_DIRWINDOWSHELP)
So I changed init*.dat files and made new ROM with 0411.mui (incl. shellres & shellresapps).
However, there were still 2 white bold lines on 2nd splash...
I haven't added:
[HKEY_LOCAL_MACHINE\Security\ColdInit]
"Locale"=dword:00000411
"ColdInit2Done"=dword:00000001
"ColdInit1Done"=dword:00000001
Because my Uni has always stuck before the initial setup (screen alignment and Dr. Johnson etc.).
This time, I added these keys per your instruction, but I'm stuck again...
Do I have to add [HKEY_LOCAL_MACHINE\Security\ColdInit] ?
This would not directly relate to my experience, but I think I can find where I made mistakes.
I appreciate your response.
Thank you.
on my rom, i changed
LOC_0409_DIRWINDOWSHELP, to LOC_0411_DIRWINDOWSHELP
also i added folows
HKEY_LOCAL_MACHINE\Security\ColdInit]
but i dont think those are not reason of your problem,
did you tried to edit new one from versin nbf??
i guees the ROM was crashed,,, i never happend,
you think some reason of registry,,,
how about htis,,,
[HKEY_LOCAL_MACHINE\ControlPanel\Stylus\192DPI]
"FontArray"="500,600,900,1000,1200"
"CurFont"=dword:384
this is the for Screen resolution.
But in my case,,without this,, not happend problems like you,,,,
strange,,,,
Hi, Asukal:
I finally find the root cause of 2 bold lines on welcomehead screen!
the mui file taking charge of screen alignment on start-up set-up process causes this problem. I made the new one with PB and solved this problem!!
(I made the previous one with another tool...)
I'm very glad to inform you this and appreciate your supports very much!!!
P.S. However, I'm still stuck with Coldinit... But this is not an issue.
I know how to convert an HV to an RGU and edit it and convert it back, but the process is less than perfect... I'm looking for someone to program a direct HV editor, but unfortunately, I'm no programmer. Anyone have any interest in something like this?
Try RGUEditor - http://rapidshare.com/files/62976220/RGUEdit.1.1.2.rar
The program has the English interface.
Forum in Russian - http://4pda.ru/forum/index.php?showtopic=49125
This program does not work directly with HV files, but this program converts an HV to an RGU and converts it back automatically.
The good program.
Alexx~ said:
Try RGUEditor - http://rapidshare.com/files/62976220/RGUEdit.1.1.2.rar
The program has the English interface.
Forum in Russian - http://4pda.ru/forum/index.php?showtopic=49125
This program does not work directly with HV files, but this program converts an HV to an RGU and converts it back automatically.
The good program.
Click to expand...
Click to collapse
If you were a girl, I'd kiss you and get in trouble with my fiancee. lol THANKS!!
Hi Folks really need some help here!!!
i have managed to hex edit the LG Menu.exe to link to the app i want and have been trying to edit the text in the dll.
every time i install the edited dll on the windows folder the app crashes.
the today buttons don't link to the menu and all if the text dissapeers from the menu.
can reinstall the orig with no probs but really would appreciate a pointer as to what i have done wrong???
have included zips of the orig string and the one i have edited if anyone would have a look i would be very grateful
the only 2 bits i need editing are Video Camera to Video Player, and WMplayer to Audio Manager
can't understand why this keeps failing???
many thanks in advance
Chris
you need to unsign it, edit it and then sign the dll again, otherwise it will not work
do you mean i need to seperately sign the dll?
dferreira said:
you need to unsign it, edit it and then sign the dll again, otherwise it will not work
Click to expand...
Click to collapse
dferreira you are a STAR
worked a treat!
many thanks for taking the time to advise
chris
hello fellow chefs
i am looking for a way to dump my phones register
i wanna make some changes in the rom when you flash it by default but i cant seem to find a way i can dump and then read the reg on my compuiter
when i start up my camera it isnt set to full screen and superfine mode
so i wanna dump the reg and storer it on my computer
then i wanna make the changes and dump the reg of the phone again and compare it with winmerge to see whats changed
have done alot of google yesterdya but couldnt manage to find it
i did try wince reg editor but without succes there:S
thanks in advance for any tips
miniterror said:
hello fellow chefs
i am looking for a way to dump my phones register
i wanna make some changes in the rom when you flash it by default but i cant seem to find a way i can dump and then read the reg on my compuiter
when i start up my camera it isnt set to full screen and superfine mode
so i wanna dump the reg and storer it on my computer
then i wanna make the changes and dump the reg of the phone again and compare it with winmerge to see whats changed
have done alot of google yesterdya but couldnt manage to find it
i did try wince reg editor but without succes there:S
thanks in advance for any tips
Click to expand...
Click to collapse
Have you tried with ceregeditor?
Search the forums for a tool called "Kheb" it can take full registery dumps and diffs if you want to track changes.
Stick the task manager in windows, then run the shortcut. You need this folder, otherwise the dump will go to my docs (-storage card-my backups-registry). The registry will be dumped as a text file. You can edit the path in the shortcut. The task manager has to have the correct name, or else it won't work.
48#\Windows\dF_TaskMgr.exe /regxpall \Storage Card\My Backups\Registry\Full Registry Export.txt
airxtreme said:
Have you tried with ceregeditor?
Click to expand...
Click to collapse
yep i have tried it
i wrote the name wince regeditor
thought it whas the same name
played half hour with it without succes
MusikMonk said:
Search the forums for a tool called "Kheb" it can take full registery dumps and diffs if you want to track changes.
Click to expand...
Click to collapse
thanks i will give it a shot
Farmer Ted said:
Stick the task manager in windows, then run the shortcut. You need this folder, otherwise the dump will go to my docs (-storage card-my backups-registry). The registry will be dumped as a text file. You can edit the path in the shortcut. The task manager has to have the correct name, or else it won't work.
48#\Windows\dF_TaskMgr.exe /regxpall \Storage Card\My Backups\Registry\Full Registry Export.txt
Click to expand...
Click to collapse
much appriciated
also gonna give it a try to see wich one is easier and faster to make the register dumps
Hi Miniterror,
I've dumped the full registry using Registry Workshop form the PC.
It's really easy to use and allow you to change the registry easily from the PC via Activesync.
ypsmav said:
Hi Miniterror,
I've dumped the full registry using Registry Workshop form the PC.
It's really easy to use and allow you to change the registry easily from the PC via Activesync.
Click to expand...
Click to collapse
thansk mate this one worked for me
the other i couldnt get working:s
Usefull tools/applications you need for cooking you can find in the stickies, including Registry Workshop plus Dotfred's Taskmanager.
Sous-Chef's Kitchen Utensils & Appliances Review