Database Users

MMS Inbox

I flashed my qtek 9100 with the latest 1.6.7 rom and the extended 1.6.7 rom also and let all the cabs in the extended to be installed. The device works like a charm now but I got no MMS Inbox. I have entered all the GPRS settings and intalled the MMS Server settings but no MMS inbox. Anyone else got this problem ?

The mms inbox in part of the extrom installs but I don't know which cab. Sorry can't be more help.

jdee246 said:
The mms inbox in part of the extrom installs but I don't know which cab. Sorry can't be more help.
Click to expand...
Click to collapse
That was what I also thought. But all the cabs in the extended are installed - I even installed them manually afterwards to see If I could get my inbox back.

Ok I think in my O2 Exec the cab that installs the mms inbox is called CAB-Shortcut-O2UK-22Aug05.CAB
I'm not totally sure though! Hope this helps.

easycure1974 said:
Anyone else got this problem ?
Click to expand...
Click to collapse
Please install Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB from Qtek_9100_1_6_7_ENG_Extended_ROM2.zip

Pol_pv said:
easycure1974 said:
Anyone else got this problem ?
Click to expand...
Click to collapse
Please install Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB from Qtek_9100_1_6_7_ENG_Extended_ROM2.zip
Click to expand...
Click to collapse
Tried that already

Did you do a soft reset after installing that cab? That can sometimes cause problems as WM5 takes a few minutes for settings changes to go from RAM to ROM.

jdee246 said:
Did you do a soft reset after installing that cab? That can sometimes cause problems as WM5 takes a few minutes for settings changes to go from RAM to ROM.
Click to expand...
Click to collapse
I did a softreset quite soon after the install - shall try it again and then wait longer !

easycure1974 said:
I flashed my qtek 9100 with the latest 1.6.7 rom and the extended 1.6.7 rom also and let all the cabs in the extended to be installed. The device works like a charm now but I got no MMS Inbox. I have entered all the GPRS settings and intalled the MMS Server settings but no MMS inbox. Anyone else got this problem ?
Click to expand...
Click to collapse
I had the same problem!! Went back to my original rom because of this.

so i have the same problem

miguelromerom said:
so i have the same problem
Click to expand...
Click to collapse
I tried everything, installing all cabs manually and looking in the registry. I gave up and did a re-flash and now it works again

MMS Fixed
I upgraded to the new QTEK ROM - really added some speed. Upgraded the Radio ROM - fixed some goofy no dial issues - but no MMS inbox.
So I re-installed the original ROM tried to copy the MMS related CABs to the extended ROM - got a "couldn't write error". I was very frustrated.
Really wanted the fixes that I got with the ROM - so I kept trying.
Ran the two MMS related CABs with a double tap. BINGO :shock: the MMS inbox was back. The CABs below are in the new extended ROM zip file
-EnableMMSDRM.CAB
-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB
I felt fairly goofy myself - simple answer.
Good luck. Still would like a way of writing them to the extended ROM - but this does for me now.

could you send my this files
[email protected]
Regards
MAR

MMS Files
Don't have to send them - they are on the FTP site. Here is the link:
ftp://xda:[email protected]/Uploads/HTC_Wizard/
Hope that helps.

thanks of new

i install it, but doesn´t runs
thanks
MAR

As I said, install in this order:
Copy the files in 1 & 2 to your SD card.
Then:
1. Run the file EnableMMSDRM.CAB
2. Run the file Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB
If you system is running as mine does - the MMS Inbox should appear.
If that doesn't work, do a hard reboot. As you finish the re-setup of your devise, just after the "Skip" option on the password and before the devise does it customization, press reset. This will prevent the loading of the on board extended ROM.
After the soft reset, complete 1 & 2 above.
If that doesn't do it - guess you got a problem larger than my answer.

i do a HR the next week, thanks of new

MMS!!!!
@benlane
Hi I followed your advice through, and after installing both of the cabs I get the mms folder,i left it for 10 mins then preformed a soft reset and it was gone, installed the cabs again and there it was!! lol but as soon as i preform a softrest it"does a runner"
guys any help would be appericaed.
im using the xda minis with orginal o2 rom and if i can avoid using o2 active that would be great!!

Instead of completely skipping the customisation step (where the Extended ROM installs), opt for Corporate Mode instead (code 0506). This installs a minimum subset of the Extended ROM, but DOES include MMS. That's exactly what I've got running on my O2 XDA Mini S and it works just fine (plus there's no nasty O2 Active stuff!)

Extended ROM Unlock tutorial

Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General

GeneralPatton said:
Hi,
Can someone point me to a simple Extended ROM Unlock tutorial because I just can't manage to find my way through the Forum.
I'de like to place my favorite apps in ROM...
Thanx
The General
Click to expand...
Click to collapse
well general, depends on the OS you are using..
if you have rom version 1.6.x.x it won't work easy yet.
the pre 1.6.x.x roms are quite simple, download totalcommander for ppc, install it, run it, in the adress-bar type "\extended_rom\" without the " " 's, and voila, there they are..
good luck..
ps.
the search button on top of this page would give the oppertunity to search for words as extended rom in de wizard forums.. :wink:

Ok
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General

Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
There's a config file in there too (can't remember it's name off hand, but it's fairly obvious). This has a list of the cab files to install after a hard reset. I guess you'd need to add your cab files to that list as well as copying them to extended ROM.
Dox

Re: Ok
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.

On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?

jsnipper said:
On my Cingular 8125 the extended ROM is write protected, does anyone know how do I remove the write-protection?
Click to expand...
Click to collapse
Only way around is to flash an older rom into your handset..

Re: Ok
nmx77 said:
GeneralPatton said:
Thanx works fine with TC
Just a last question, all cabs i place in extended_rom will install automatically after hard reset ?
'cause I saw i had a autorun.exe file in there and some sutomization cabs that install after Hardreset ???
Thanks
The General
Click to expand...
Click to collapse
depends, some have a config.txt file, if you open this one and edit it to your
needs, the files you put into it will be installed after hard reset, if you
set the right parameters from the txt file.
other roms have the autorun.exe wich installs all the files in the extrom.
i'm not sure anymore if this is right, but i believe that if you rename your
cab's like this:
applicationX.cab -> Default_applicationX.cab
it will install without any problems.
if you have problems with unsigned cabs, you can use the signed.patch
wich can be found on the ftp.
Click to expand...
Click to collapse
Hi
Could tell us where on the ftp we can found signed.patch?
Bye
Herc. 8)

Here it is
i couldn't find it on the ftp anymore as well..
i'll put it there again, but here it is for you

if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.

Ray_jai said:
if it's that easy to get into extended rom, then why do people release the unlockers for extrom? i don't get it.
Click to expand...
Click to collapse
you can access the files on the extended rom, but you can't edit any of the information there. you have to flash a new extended rom image for any changes to take effect. I think those that are looking at the extended rom unlockers is for a different purpose. I think I read somewhere that it let some people use the extended rom space as extra storage (~10 megs), but it messed up applications on the phone, especially the camera.
in general, it doesn't seem to be a good idea to unlock the extended rom. most rom builders look like they are trying to learn how to edit this properly to add it o their rom kitchens.

can one's extended rom go curropt?
after i heard about this, i went into extended rom just to see if it works.
and it did. i exited total commander and started to gather my anti theif program to get installed.
now I go back into extended rom, and everything became gibberish!
and when i click on something it says "error 3 Changing to dir!"
WTF is going on!
can someone help me out?

Unlock Extended ROM

I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank

fmcgirt said:
I just discoverd that I cannot modify the extended rom (using Total Commander, etc.) How does one unlock it so tht it may be modified?
Thanks,
Frank
Click to expand...
Click to collapse
It can, just try again anad again, i did it on my 4th attemps
Cheers!

Thanks for the response but I haven't had any success after several tries. I tried installing the Wizard unlock cab file and afterwards with Total Commander, I can reset the Read Only bit on all the files and copy the files to my SD card. However, I am unable to delete any files. They appear to be deleted but come back after a soft reset. I would like to especially get rid of all the operator settings files. The rest of the stuff like Skype, Anti Virus and Backgammon I can get rid of using Settings>Remove Programs.
Frank

Isn't "ROM" short for "read only memory"?

hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?

Total commander does not work with the jamin in my case anyway.
Tried several time with no results.

shahzadkhan15nov said:
hi, I am using Buzz's unlocker for Wizard... it made the ExtROM visible but still it is read only
I need to find how can I delete and add files to it.
Any challenging minds out there?
Click to expand...
Click to collapse
hi,
unlocker for wizard is not mine...
buzz

...well, if anyone can give me a dump of Prophet's bootloader + clean registry export, i can take a look at it..
buzz

Buzz,
Thanks for the great offer.
I can give you the clean reg but how can i get you the first part, bootloader thingie?
Regards

I have used the Wizard Extended ROM unlock program to unlock the ROM on my Prophet. I now have a copy of the Extended ROM on my SD Card. I'm not concerned about erasing the Extended ROM files, I just don't wan them installed, so I did a Hard Reset and just when it says that it will start installing the additional prorams in 3 seconds, I did a soft reset.
OK, now I have a Prophet without extended ROM. I can now install the stuff that I want.
Most of the cab files I've figured out, Does anyone know what the following extended ROM cabs do? This is from the latest Imate Jamin ROM.
Default_CAAVPPC_IMEI_2.6.77_range.CAB
Default_Imate_PPC_SA_V5.5.03.cab
Default_MP_Shortcut_MMS1_JAVA_VOICE_CV_051213.CAB
Default_PP_TSK.CAB
Default_PP_UAString.CAB
Default_PT_Signed_IconDll.sa.CAB
Default_PT_Signed_Patch_SD.sa.CAB
Thanks heaps,
Matterhorn

Default_CAAVPPC_IMEI_2.6.77_range.CAB is the anti-virus app which used to play havoc in slowing down the KJAM. Maybe this version is better but I uninstalled it using Remove Programs. About the rest I am not sure. At least you don't have Skype, backgammon and the Operator Settings files so I expect you will gain a fair amount.
Frank

you can use wince cab manager to see the content of the cab file.

Still nothing? Guess I will go the way of Matterhorn when I need to do a hard reset. Several others have not installed the Extended ROM at all and have reported significant speedup in the JAMin.
Frank

That would be me. I haven't installed one thing off the extended rom and my speed is really pretty good. You can see a video review at the link below to compare the m600 and the jamin (with no extended rom). Keep in mind I don't use mms, skype, antivirus anyway....so no big deal to leave off the ext rom. I also use adobe and don't need the clearview .pdf. Hope the video helps
http://www.howardforums.com/showthread.php?t=849592

Thanks, Mike. I don't use the stuff either except MMS once in a while but can just as easily use email for that. I presume Voice Dial is in the Extended Rom but rather have MS VC anyway and things like Connection Manager, Messaging, etc., that I want are not in the Extended ROM so I should be fine.
Now to find time to do a hard reset and re-install my apps.
Frank

Everyone has diffrent issues, I was able to delete the files from there (verified by refreshing the dir, and I recieved no read only error) but I was unable to write files to it, which I thought was very strange, I am using APA_ext_rom_unlock.exe and it does NOT give me the success msg it acts like it hasnt even ran. I updated my ROM to teh test one that was floating auround 2.8.7 whatever, and I realized too late that aWizard has no way to reflash teh extended ROM so I am without all my Cingular apps and I have all the 2.8.7 Extended rom stuff with the 1.8 Cingular OS ROM which I reverted back to. Any suggestions how I can replace my extended ROM ?

any luck so far?
Hi guys,
Are we getting any hope/luck to unlock Ext ROM for JAMin/Prophet?

I don't know how you guys are doing it. I have tried several times to delete items in my extended rom using total commander, at least 10 times and the result is the same. After the hard reset all that was deleted was re-installed after the reset.
I have contacted TC a while ago, and have not heard anything, maybe they are working on it.

Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:

mikewchandler said:
Just curious....as I'm new to this ext rom stuff....but why don't you just "not install" the ext rom. Then use gsfinder to install whichever .cabs you want? If any? Just curious as I may be missing something. :roll:
Click to expand...
Click to collapse
No, I think the end result would be pretty much the same. For me I would like an Extended ROM for the JAMin that includes exacty what I want installed - no Backgammon, AntiVirus, Smart Dialing, Skype and a single Operator Settings file for TMO USA. Then when I hard reset I don't have to mess with anything else, just let it go. I had my KJAM setup that way and I would like the JAMin to be the same. I would also be as close to an OEM install as I can get (without the junk) so I don't have to worry about proper default settings not being there because of some file I didn't install or installed in the wrong order. Having said all this and thinking about it more I am sure you would get to the same point doing your procedure and then installing the required .cab files in the proper order.
Now I have a question:
Wonder what would happen if I did a hard reset, then did the soft reset to stop the Ext ROM install, installed the required .cab files in order, soft reset and then restored from a Sprite BU file. Wonder would I be restoring any files that could cause problems due to an imcomplete ROM install? I guess I will have to try that first since I do hate to re-install a bunch of apps and especially have to re-enter all the reg codes.
Frank

Automatic-install to SD after hard-reset

Hi,
I noticed I don't like the extended rom feature (as far as I know it installs everything to the phone RAM).
Is there a program/way to have a group of cabs, automaticaly installed to my SD-card after a hard-reset?
btw. is there an easy way to make my own cab files ?
Thnx,
Bartus

Helo,
i a m like U !
Are you find the solution ?

Bonusbartus said:
Hi,
I noticed I don't like the extended rom feature (as far as I know it installs everything to the phone RAM).
Is there a program/way to have a group of cabs, automaticaly installed to my SD-card after a hard-reset?
btw. is there an easy way to make my own cab files ?
Thnx,
Bartus
Click to expand...
Click to collapse
The apparent consensus among folks who know more than I do including some folks who have written programs like "settings savior" and mortscripts to do automated cab installs is that you still have to process the cab "manually" if you want it to go to storage card..there is no automated method...

WM6 (Crossbow) for Typhoon + Flashing Guide! [Ready for download]

All you need:
http://www.geocities.com/gggbitonti

SORRY! fixing the link.. the site will be on line back WORKING! in 10 minutes!
thank you for segnalation
regards!

i followed the guide.
but when i turned the phone on for first time to load.
its loads slow and stays freezed...then i get an error
"Unknown SIM status.(Error 262144)
i think my radio rom maybe wrong.
if u know where to get a bin file..which i can upload via mtty1.42.exe
because i think my radio rom is old and i update to wm6 with old radio rom.
also it was a locked branded orange phone.
however before i proceeded with your tutorial i done the neseccary procedure such as regedit,,,super cid change and unlock sim
using spv services tools etc
so if you could help please i would much appreciate it..
because atm the phone is in operable and i would like to at least flash back to another rom or whateva....but it looks like i will have to do it through UI and mytt142.exe as these are the only things i can access via phone and pc.
thanks

...works fine with my sda music...only this horrible joysticbug

sandman: the .bin file for mTTY is on the last download link in the archive with WM6, here you can find mtty 1.42 to load the rom.. but to load the rom you need my SPL i share.. i don't know why it say you this sim problem rom.. the only tip i could give you is try to restart the procedure! my starting test was on a Typhoon WM5 updated.. but with the initial procedure you erase any old SPL... so, retry procedure step by step it work, i tested it 3 times before share and there are people who had success good luck!

...is there a way to solve this joystick-bug?

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
could my make this work for htc monet

It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.

weikey said:
It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.
Click to expand...
Click to collapse
yessss t-mobile SDA (imate sp3i) rom update bad error joystic
keyboard dll problems wm6 rom not using

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Thank you so much I followed your instructions ang got a wm 6.0 typhoon ..its so cool dude...thxxx
but could be better I think if someone who know how to improve this wm 6.0 stuff...thxx

is there a way to application unlock in wm6
other than that it seems to work fine

works on imate sp3 now..

double blah

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Hi, thanks for the guide.
I am following the below steps in order to upgrade my untouched SPV C500.
Go to the folder where you extracted files from TyphoonNBFTools_0.3_SPL1010064_SPVServices.zip and run TyphoonNBFTools.exe
In menu select File > Open NBF... and load SPL1010064.nbf.
Right click on SPL1010064.nbf and select 'Emergency Flash' in popup menu.
Click to expand...
Click to collapse
Now, after loading SPL1010064.nbf, I am unable to proceed further. The reason is there is no SPL1010064.nbf visible there, so that I can right-click it... Could you please advise?

Never mind about previous post, I now got it to work. Looks fantastic so far, thanks a lot!
My mistake was I hadn't application unlocked the phone before.
This phone had been in a drawer for 2 years, and I believe it will again be in my hands, at least on week-ends.

Mega GREAT WORK !!!
It runs smooth on my dutch SPV C500
Who would have thought that WM6 on C500..
grtz!

didnt work for me. failed at first step with reliability test failed. Perhaps its cause i'm using vista.

I Have Application And Sim Unlocked My Phone But I Do Not Know If I Have To Do Something With The Cid Tool

FLORINOX, you have to SuperCID your phone

Hi to all...
I have flashed wm6 to my SPV C500 but my miniSD card is not working now...
???
EDIT:
I try other one and everything is ok....