I've searched a bunch, but I can't find the answer. I usually flash from an sd card and I wanted to know which file is the radio image. Is it Special_4350.nbh or is it within the RUU_signed.nbh? Please point me in the right direction. Thanks.
I'm not sure but someone has already posted download links on ppcgeeks to the rom, radio and extended rom.
swinn said:
I'm not sure but someone has already posted download links on ppcgeeks to the rom, radio and extended rom.
Click to expand...
Click to collapse
Yes, I saw Vetvito's post there. I installed the new ROM by downloading the windows installer pkg, unzipped it and put the two .nbh files on my SD card. It seems it updated with no problem. What I am wondering is if I omitted any important files other than the new .prl. Are the dll files necessary when flashing by SD or are they included in the .nbh files?
Related
Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.
PublicITI said:
Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.
Click to expand...
Click to collapse
Try flash this rom:
http://forum.xda-developers.com/showthread.php?t=437630
after this hard spl try to flash wm6.5.1. I have flashing this wm6.5.1 from sd card http://forum.xda-developers.com/showthread.php?t=559307 and work gooood.
This is NOT development related. Please post on the correct section next time.
PublicITI said:
Hi everyone.
Yesterday I tried to flash a WinMob 6.5.1 ROM.
It failed. After flashing 3%, the USB disconnected and that flashing assistant told me, that the image file is corrupt.
I used different .nbh files from www.thewingster.com.
I tried this: http://forum.xda-developers.com/showthread.php?t=561086
What I did was the following.
I installed 3 .cab files (a.k.a. HardSPL I think)
I extractet that RUUKitchen Thing and put the .nbh into the Folder and started the Program (with admin rights).
Is that all I have to do, or did I forgot to do something or did something wrong?
Thank you.
Click to expand...
Click to collapse
Well you can see if you're HardSPLed by going into the bootloader, and looking at your SPL, I believe. It should be 4.7 or something.
If you're hardSPLed, then the ROM you're flashing probably requires you to flash through the storage card, NOT through USB!! You'll find instructions on how to do that on one of Mr. Ill's ROM pages. I wrote the instructions up, they should work for you.
I am wishing to attempt a hspl on my T-Mob uk hd2, the procedeure requires me to copy the existing RUU file to my storage card in the eventuality that I need to restore it to it's original settings. Please explain where the hell I find this file?
What? I think your confused, check out my thread in my sig, use it to help you but at the start there are links to other useful threads on using it. Also I have a small glossary to help you.
the .exe file you downloaded is actually a zip file. so rename it .zip instead of .exe and now when you run it it will open to show you a list of files,one of which is ruu signed.nbh
oh and it isn't part of the flash.only if the flash goes wrong.
Thanks guys, I understand how to flash a rom but am unsure about backflashing my stock T-Mobile (UK) Rom is there one available?
There is deffinately a T Mo uk rom, ive seen it mentioned several times. Look hard in the Official Roms thread and you will find it.
Hey everyone...not sure where I'm supposed to ask this, so I put it in general.
As I am on a Mac and use HardSPL to flash ROMs, it is not possible for me to upgrade to an official ROM because it is in .exe format. So, I need someone to post the RUU_SIGNED.nbh from the official ROM update (WWE: 1.66.405.2).
I'd greatly appreciate it if someone could help me out and provide the NBH file or point me in the right direction. Thanks
im not aware of any fix with your issues but to use bootcamp and use Windows OS.
You can also try Parallels or Vmware Fusion. Im just not sure if it's gonna work.
i would say maybe. =)
now, regarding .nbh, you can probably post a holla down at the Rom developments section.
jabbawalkee said:
Hey everyone...not sure where I'm supposed to ask this, so I put it in general.
As I am on a Mac and use HardSPL to flash ROMs, it is not possible for me to upgrade to an official ROM because it is in .exe format. So, I need someone to post the RUU_SIGNED.nbh from the official ROM update (WWE: 1.66.405.2).
I'd greatly appreciate it if someone could help me out and provide the NBH file or point me in the right direction. Thanks
Click to expand...
Click to collapse
usually on PC you can extract exe whit winrar or 7z, i think there is mac version to
huggy_72 said:
usually on PC you can extract exe whit winrar or 7z, i think there is mac version to
Click to expand...
Click to collapse
I'm not trying to download Bootcamp, Parallels or anything else like that...I just want someone (who has a PC) to grab the RUU_SIGNED.NBH file and post it here. I will send a paypal donation to the person that does so. Thanks
Please can someone post the RUU_SIGNED.NBH from the officially 1.66.405.2 WWE ROM update? I will compensate!
the exe file is actually a zip file. No need to run it. just change the extension to .zip instead of .exe, open it with any decent zip tool (winzip winrar or whatever) and extract the RUU_signed.nbh
download an file archive programme and open the official EXE file with it and you can do it yourself!
samsamuel said:
the exe file is actually a zip file. No need to run it. just change the extension to .zip instead of .exe, open it with any decent zip tool (winzip winrar or whatever) and extract the RUU_signed.nbh
Click to expand...
Click to collapse
I just tried using winrar and it did not work. It will not extract the files. Are you on a PC? If so, it would only take you 2 minutes to grab the file I need and post it here. Thanks.
jabbawalkee said:
I just tried using winrar and it did not work. It will not extract the files. Are you on a PC? If so, it would only take you 2 minutes to grab the file I need and post it here. Thanks.
Click to expand...
Click to collapse
its a 200 meg file, so sorry no it wont 'just take me a minute'. I can promise you (as can everyone else here) that the .exe file you download is just an executable zip, and we all generally right click it, choose open with winrar, and it opens to show the ten or so files inside, one of which is RUU_Signed.nbh. Then drag n drop the file from there.
If you really are getting an error, you should maybe download it again, something isn't right.
I'm on a Mac also, but I always flash via XP on a Bootcamp partition. I just leave all the flashing stuff there, and only use it for that.
You should also be aware that if you flash the 1.66 rom from sd card you will overwrite your SPL to version 1.6 which means you may have trouble installing HSPL later.
samsamuel said:
You should also be aware that if you flash the 1.66 rom from sd card you will overwrite your SPL to version 1.6 which means you may have trouble installing HSPL later.
Click to expand...
Click to collapse
I don't care about that so much. I'm trying to sell the phone and want to sell it as stock as it can be. I'll just flash 1.48...thanks for everyone's help. I'll stick to Android
samsamuel said:
You should also be aware that if you flash the 1.66 rom from sd card you will overwrite your SPL to version 1.6 which means you may have trouble installing HSPL later.
Click to expand...
Click to collapse
Exactly. By happy luck/accident, I was unable to do so before I knew this when I first got my HD2, now I have (thanks to everyone here) HSPL installed....but I realize now that If I had been able to install it, I probably would have, not knowing any better, and given myself a lot more difficulty in the process. This is the best source of phone info anywhere on the planet.
samsamuel said:
the exe file is actually a zip file. No need to run it. just change the extension to .zip instead of .exe, open it with any decent zip tool (winzip winrar or whatever) and extract the RUU_signed.nbh
Click to expand...
Click to collapse
Thanks for the info it really helped me out.
The search button really does work.
samsamuel said:
You should also be aware that if you flash the 1.66 rom from sd card you will overwrite your SPL to version 1.6 which means you may have trouble installing HSPL later.
Click to expand...
Click to collapse
I am installing T-Mobile_HD2_RUU_signed_3.14.531.1 from the sd card, will i be able to get hspl back ?
craig540 said:
I am installing T-Mobile_HD2_RUU_signed_3.14.531.1 from the sd card, will i be able to get hspl back ?
Click to expand...
Click to collapse
that rom will set spl to 3.03.0000 if flashed from sd card, and you would use hspl4 to re apply hspl, should you want to.
I already have hspl to 3.03.0000 and can not load anything when connected to USB, I was trying to go back to hspl 2.08 so i can load recovery. Is there another way.
[Q] o2 HTC HD2 Latest ROM
..... Ignore........
Is it possible for someone to post the newest ROM upgrade with the extracted renamed nbh file? I don't readily have access to a computer, will be flashing from the micr sd card. Thanks!
Are you sure? If you flash a stock ROM via SD it will overwrite the SPL.. just fyi.
Yes...
Yes, my current ROM is giving me the fits, so thought for now, a stock version would have to suffice. Coupled with no computer access, my last choice seems to flash the latest TMOUS LEOIMG.nbh from the micro-sd card. Having trouble locating such a file...
Try downloading PocketRAR or even most file explorers (resco and I think TC) can extract zips.. then just extract the nbh and rename it leoimg.nbh. I would upload it for you but don't have the time right now.. sorry :/
Thanks...
I have tried installing PocketRAR to no avail. Resco file explorer can't seem to extract the necessary file(s). If there is someone out there that can provide some information on how to perform such action, or even post the correct LEOIMG.nbh file, it would be greatly appreciated.
Thank you!
Hi,
i would like to know how i could get my stock rom from my N4, like a .zip file. Because i tried nandroid, but i would like to modify the rom with the kitchen, and i don't know how to do if i don't have a zip file... Thanks !
AutruiP said:
Hi,
i would like to know how i could get my stock rom from my N4, like a .zip file. Because i tried nandroid, but i would like to modify the rom with the kitchen, and i don't know how to do if i don't have a zip file... Thanks !
Click to expand...
Click to collapse
You should be able to extract the boot and system images from Google's factory image.
https://developers.google.com/android/nexus/images#occam
I wasn't aware that the kitchen worked with the Nexus 4 as its still listed as one of the unsupported devices but the thread hasn't been updated since October of last year so maybe that changed.
this is copied from dsixda's kitchen thread (http://forum.xda-developers.com/showthread.php?t=633246 post #3):
How do I import a ROM into the kitchen to use as my base?
(The instructions below are for HTC devices in general. For other devices, please visit the appropriate thread.)
From a shipped ROM:
First, find the shipped ROM for your device, usually from htc.com or from searching xda-developers (check the Wiki or sticky posts under your device's sub-forum).
This link may help: Various devices
Please don't ask me for links, as I don't know everything or own all devices.
The shipped ROM can be found in three different formats. Identify the type you have downloaded:
If the shipped ROM is in a .ZIP format, then simply copy it to the kitchen's original_update folder.
OR if the shipped ROM consists of system.img and boot.img files, then copy those two files to the kitchen's original_update folder. If the ROM also includes a lib.img (found in some newer HTC ROMs), then copy that as well!
OR if the shipped ROM is in an .EXE format, then do the following:
In Windows, run the shipped ROM's .EXE file till it gets to the first dialog. Stop there but don't close the window yet.
Go to Start->Run and type: %TEMP%
When the folder opens, search for Rom.zip (use the "magnifying glass" Search button)
Copy Rom.zip to your kitchen's original_update folder
OR from a cooked/custom ROM:
Copy the update.zip (or equivalent ZIP file) to your kitchen's original_update folder
OR from a Nandroid backup (under /sdcard/nandroid) [NOT RECOMMENDED FOR NON-STOCK ROM BACKUPS]:
Copy the system.img and boot.img files from the backup folder to your kitchen's original_update folder
Hm, i see. But the problem with the dev links for Google is that it's 4.2.2 and not 4.2.1... I would like to stay to an older version for the moment, with those problems with bootloaders, kernels etc... I will try with system and boot img, thanks !
Sent from my Blade S using xda app-developers app
Well, i tried to use the tutorial about shipped rom, but my system.img and boot.img files aren't recognized by the kitchen... So i don't know how to do Halp ?
In this thread you have posted link to factory image with android 4.2.1 http://forum.xda-developers.com/showthread.php?t=2145848
Great !! Thanks a lot eskeyy !