Hi
Has anyone found a way of pasting the network key in rather than type it?? I connect to a lot of different wireless network but store all the keys in a txt document and would like to type in each one.
I have tried PQz but doesnt help.
Hi all.
Our network administrator periodically changes the network key for our wireless access points for security reasons. Then our laptops are configured to use the new network key by copying and pasting the new key onto each computer using a flash disk. In my case, when I want to access the network using my Wizard, I have to physically input the new key in character by character each time (and it's usually quite a complex key at that!). I was wondering if any of you know if it's possible to paste the new key into the password field from a text file or email, since the usual tap-and-hold method of pasting text doesn't seem to work when inputting passwords.
Have you tried using the popup keyboard, ctrl v?
V
Hi all,
I've got a a wifi network with a full length pass phrase that uses the complete extended ascii alphabet (including characters not on the TyTn) and am wondering if there is a way to cut and paste the key into the network key field of the wifi configuration wizard?
Thanks
Same problem
Yes, I have the same problem as you do. I can not paste the long WPA key into the box. The Paste option is disabled. Did you find any solution?
Innovative said:
Yes, I have the same problem as you do. I can not paste the long WPA key into the box. The Paste option is disabled. Did you find any solution?
Click to expand...
Click to collapse
I use a free download called Hitchhiker which is meant for seeking out and making it easy to log onto networks. I've just tried and it allows pasting of the key into the box. If you then exit hitchhiker it says it will disconnect from the network, But don't worry as it saves the key to the appropriate place so when you log in again by the normal route it is already entered.
NB obviously you can save a text file on PC with the key on it and move it to Hermes but when pasting use ctrl v to paste on softkeyboard not usual press and hold the stylus as that does not give the paste option.
http://www.kasuei.com/hitchhiker/
Mike
I am using a KINm Two and am having issues with this crap software.
Problems with Browser:
-I cannot input more than 16 characters into a username field. The username im having trouble with is an email adress, which is why it doesnt fit within 16 characters. Any way to copy and paste without "the spot"
-Cannot watch youtube videos on home wifi. At a friends I canwatch youtubes, not at home. I still have connection and can surf at home
wifi problem:
-at school there is a secure wifi that all itouches can connect to. however when i try to connect i get a "try again later" error. i need a username and password to sign in to use it, but there are no input fields for those on the settings menu.
thanks in advance
kintworooter said:
I am using a KINm Two and am having issues with this crap software.
Problems with Browser:
I cannot input more than 16 characters into a username field. The username im having trouble with is an email adress, which is why it doesnt fit within 16 characters. Any way to copy and paste without "the spot"
-Cannot watch youtube videos on home wifi. At a friends I canwatch youtubes, not at home. I still have connection and can surf at home
wifi problem:
-at school there is a secure wifi that all itouches can connect to. however when i try to connect i get a "try again later" error. i need a username and password to sign in to use it, but there are no input fields for those on the settings menu.
thanks in advance
Click to expand...
Click to collapse
I have also experienced the problem with youtube. It usually goes away after restarting the phone. Also for the secured wireless network at school try to manually add it by pressing other in the WI-FI settings on your kin.
dezgrz said:
I have also experienced the problem with youtube. It usually goes away after restarting the phone. Also for the secured wireless network at school try to manually add it by pressing other in the WI-FI settings on your kin.
Click to expand...
Click to collapse
I have tried that. I have also tried messing around with the types of networks (wpeg and wpeg2 or somthing) but none of them give me a username and password box. Ive also found out that itouch users gotta plug in a port number too, is it possible to use the hidden menu to connect to this network?
Also, restarting my phone didnt solve the problem of no youtube on home wifi. It doesnt even buffer...
I want to automatically select the default network to which the device connects
(the first combo in Settings->WirelessControls->menu->Connections->Advanced->SelectNetworks -
See attached image)
My problem is as follows -
When I set up the connection to the operator -
it sets the default network to be <<3G Portal>>
I want to automatically change it to <<Internet 3G>>
(Or in the worst case -
Automatically delete the <<3G Portal>> -
making the <<Internet 3G>> the only available option -
which will force it to be default)
Does anyone know how to do this ?
(Even if some Cpp/C# code is needed - does anyone know the API ?)
Thanks
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
As I understand your Q, you wanna auto set the default network without having to manually change it everytime you hard reset / change roms?
Here's what I do for such things.
Get ceregistry editor, connect to your phone, export the registry to file, then, on the phone, change the default access point to the one you would rather it was, (possibly reboot phone here to be sure the registry has changed the default apn,) back into ceregistry editor, compare current registry to the snapshot, figure out which key changed, and to what value, then provision that reg key (via a cab, or provxml,) whenever you hard reset, after the network has been set up. (I have a cab with dozens of tweaks in it,you can just keep adding to it)
johnerz said:
Not a lot of sense there
Looking at the screen print
The phone is set up to access the web FIRST via the 3G portal (every phone needs a portal to get online).
The second option looks to me to be a WIFI connection. Wifi always take priority over gprs/3g/hspa
so unless you can make a bit more clear what your looking for......................
http://www.filesaveas.com/gprs.html
Of course, if you mean a different web access point get the APN settings and manualy add then from the settings menu - wireless and networks access point names - press the menu button - add apn
Click to expand...
Click to collapse
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Som30ne said:
Thanks for the reply.
Both connections are over the Cellular network.
The first one (3G Portal) is set up by the operator to go via some proxies and stuff, which block certain services/sites as they are not stored on this proxy.
The Second one is "unfiltered" internet connection over the Cellular network.
Whenever the network is detected and set up, the settings are automaticelly set to go via the "proxied" connection.
I want to change it to work over the unfiltered connection.
I would like to know the registry keys or any other place this information is kept, so I could automatically change it.
I tried searching the registry for these values but could not get to a definite conclusion about where exactly the "default connection" is stored, or if it is stored in the registry altogether.
(If it is stored in the registry - I do NOT want a complete registry import/export - just the relevant keys)
Many thanks in advance.
Click to expand...
Click to collapse
Try using Data Controller by Red Frogfish. With this app, you can turn on and off all of your different connections indvidually.
Since, I have T-Mobile, I have the following connections:
T-Mobile Data
T-Mobile MMS
T-Mobile Internet
And, Data Controller lets turn each on or off as needed/wanted.
Rob
samsamuel said:
Yes it is stored in the reg, but it stores an ID for each connection which is different for everyone, hence the method I suggested which would reveal both the key and the ID, I wasn't suggesting you import a whole registry, simply make a cab of just the one key. It would take about 10 mins to do, but I'm not running winmo so can't lookup the key for you.
Click to expand...
Click to collapse
Ok, thanks.
I will try this method.