How to remove udk's boot screen ??? - Touch Cruise ROM Development

I just upgraded to udk's latest rom...but i didn't like it so much...
So I decided to change and upgrade to A.Serg latest ROM (and radio 1.64)..it's the best rom..
But..... When I finished the upgrade, i saw that previous rom boot screen was still there...when the device is booting the first thing i see is udk's boot screen..
How can I remove that?? Please?
I like udk's ROM's but now I installed A.Serg's ROM...so it is not fair .....
Please help....

You have to install an other splash screen!
http://forum.xda-developers.com/showthread.php?t=375980
This is not about fair or not fair.
Simply, UDK's rom has spash screen, Aserg's rom has not.
There is nothing in it to overwrite udk's splash screen.

This is the original smart mobility 1st splash.
But watchout : hard resets your device.
http://rapidshare.com/files/96564915/CRUISE_flash_1st_splash_original_watchout_hard_reset_occur.rar

Use UDK's custom RUU to avoid HR!
http://forum.xda-developers.com/showthread.php?t=376119&highlight=customRUU

Dr.pee tell me--->flash official ROM and then flash the ROM u want.

fktsndr said:
Use UDK's custom RUU to avoid HR!
http://forum.xda-developers.com/showthread.php?t=376119&highlight=customRUU
Click to expand...
Click to collapse
so use this one:
http://forum.xda-developers.com/attachment.php?attachmentid=97556&d=1215366061
It only says "Smart Mobility"

Related

Any Rom on polaris

If i install hard spl on my device,can i then use wich rom i desire then?? Not so familiar with this so i would be fine with a tutorial,on how to flash rom in norwegian mode. See there is a lot of roms that i would like to try, but i dont dare. Do i have to change the radio or not. If i install hard spl,will i then be able to use any rom on this forum??
And at last : will i be able to get my orginal rom back if i desire by an hardx reset?
Best regards
Bjørn
NORWAY
Hi,
If you flash Hard-SPL, you can flash any Polaris ROM.
You can't flash ROM's for other devices like Diamond or something else.
Greets
mutant92
vaktmester1 said:
If i install hard spl on my device,can i then use wich rom i desire then?? Not so familiar with this so i would be fine with a tutorial,on how to flash rom in norwegian mode. See there is a lot of roms that i would like to try, but i dont dare. Do i have to change the radio or not. If i install hard spl,will i then be able to use any rom on this forum??
And at last : will i be able to get my orginal rom back if i desire by an hardx reset?
Best regards
Bjørn
NORWAY
Click to expand...
Click to collapse
Like mutant92 says, after HARDSPL you can flash any rom you like, just follow the instructions that goes with it in its first post. Afterwards you can get back to the original rom. I'll tip you to look around some more on this forum under 'Polaris upgrading etc.'. All your questions will be answered there.
There's one thing: make sure the HARDSPL works by testing it.
If you want it strictly Norwegian use this one.
Greetz, Steady Ron.

New Manila 2D for Iolite WM6.1

Can we install (eg. with a .cab file) the new Manila 2D (see attach picture - Weather/Flipclock) on our orginal WM6.1 ROM ?
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
it doesn't work!
Frank Caarls said:
Hello Treo, try this thread.....http://forum.xda-developers.com/showthread.php?t=541750
It will work. However I would recommend you to install first hard SPL and than a new WM 6.5 rom with this theme.......is much more complete, smoother and functional....
succes.
Frank C.
Click to expand...
Click to collapse
it doesn't work!!!! i try it right now...
i can't change original rom before a year because i could lose italian guarantee...
The thread is verry confusing me and it isn't entirely coordinated on the Iolite.
When I update a non-HTC ROM I will lose the guarantee, So I preffer an installation of Manila with a kind of .cab file.
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Blubster said:
After you install the HardSPL, you can always restore the original SPL to your device, if you have an issue with it... And then send it back for guarantee...
Click to expand...
Click to collapse
But how to restore our stock rom ?
You can dump it from your device before you flash a custom rom, and then rebuild a "stock" rom with the dumps with ervius kitchen...
Then if you need to send it back for warranty, you can flash the stock rom, then the stock spl, and you are good to go!
That is IF you can flash back, ie your screen and your usb port are still working...
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
rorrism said:
I have this running and it works fine, the only problem is that the default blue O2 background is still behind the flip clock. Any ideas how this can be fixed???
Mark
Click to expand...
Click to collapse
How and what did you installed ?

Urgent..please help

Hey guys.. I havent tried flashing any of the cooked ROMs before. Which do u guys think I should try out? There's just too many of them. Im currently on the 1.665 WWE official ROM
Hi,
Wellcome!
I'm using and recommended Miri's ROM :
March 11, 2010 02:27 AM
Miri HD2 WM6.5.X (23545) ROM :: Sense 2.5 with Swype :: V 8.0
Is there a greater difference than the stock 1.66?
6.5.x has the (IMO rubbish) new buttons at the bottom - if you want stock looks then go for the WM6.5 version I've got on my sig...
Yes but in terms of performance and visual effects, is there really a big incentive as to switching to cooked ROMs?
Julian2103 said:
Hey guys.. I havent tried flashing any of the cooked ROMs before. Which do u guys think I should try out? There's just too many of them. Im currently on the 1.665 WWE official ROM
Click to expand...
Click to collapse
Hi
Make sure you have the HSPL on your device before you try any cooked roms. Also there are SSPL, Goldcard available . You have to read the sticky threads before you try to flash. You are warned without above you might brick your device.
good luck
I think im gonna try the artemis 5.5. Good feedback on that? Yes ive done the app steps
quick tip - never use the sd card method to flash a phone, you're more likely to brick it or, worse, put an SPL that can't be rolled back. ALWAYS use HSPL and flash via ActiveSync/WMDC
KAV2010 keeps deleting HSPL as soon as I unzip it. Geez..
I flashed a cooked rom thru the Spl method. Now my phone is unable to boot. I am unable to perform hard rest. What should i do?
Julian2103 said:
I flashed a cooked rom thru the Spl method. Now my phone is unable to boot. I am unable to perform hard rest. What should i do?
Click to expand...
Click to collapse
It depends on the ROM you have installed but is more like you have to install radio 2.08 or 2.07 the 2.10 roms are radio dependant.
Regards,
Me
How do I do that now that my phone cant boot?
Please keep the questions in 1 thread. This makes 3 now.
ClydeB1 said:
Please keep the questions in 1 thread. This makes 3 now.
Click to expand...
Click to collapse
He is desperate bro..
Julian2103 said:
How do I do that now that my phone cant boot?
Click to expand...
Click to collapse
If you've got HSPL on, just turn your phone off, battery out if necessary. Then replace battery, hold down volume down button and press the power button (end call). It will boot into bootloader, then you can use custom RUU to put another radio on, try 2.08.50.08_2 That is a guess as to the right radio, but might help you out.
PS Sternas says he uses 2.06.51.07 radio in his Artemis ROM, so try that one.

[Rom] winmo6.5 build 21889- Stock apps fully loaded with liitle customization

Dear All
Link updated.....Solved the error of ONBL
I am Tahir, an OPAL owner from India
To all the OPAL lovers here I present my first 6.5 ROM based on build 21889
I know its a quite old build now, but I liked it the most & have been testing it for past 10 days
My special thanks to my friend Sumit also K/as Krazy about Technology from Gene forum who is my Guru to this windows mobile world. he has been a tremendous support to me for all my queries & setting up the basics for this ROM.
Some of the EXT packages & folder customization have taken from Sumit's ROM for Gene.....by the way I myself own a New Gene
This ROM is free of bugs to my best knowledge rest I leave to you all my freinds
Feedback is most awaited & I hope you would like this release
Feature
- Based on original stock ROM of OPAL OS version 1.35.0.0
- EXT replaced with Mega ROM to reasonable extent
- With all stock drivers from OPAL
- Highly stable....( although you people will give more feedback)
- Unlike other ROMs, home settings tab now working fine
- Customized folder & few apps taken from Sumits ROM have been added...Thanks to Sumit
- Plain Winmo 6.5 look....no customization
- Registry tweaked to enhance battery life
- 65-69 Mb free RAM at startup & 128 Mb device storage
- Soft key menus & selection bars specially edited to make them more finger friendly
- Idea Operator flash logo removed...( as its irritating for people abroad)
- List of packages included
AdobePDF
Advanced_Configuration_Tool_v3_3
HTC Album
Arcsoft_MMS
AudioBooster
AudioManager
Battery Tweaks
BootLauncher
ClearTemp
GoogleMaps
JBed_3dMod
LockStreamDRM_1_1_080625_O9_02=True§
EzInput_Western
PhoneCanvas
PictureEnhancement
PIM_Backup_Dotfred
RandomAccess
RingtonePlugin
RSSHub_2_1_1_1069_00=True§
SecurityWarningOff=True§
Settings+=True§
ShareDLL_2.0.070522.0000=True§
SKTSync
SmallUtils
StreamingMedia
TaskManager
UCWeb_Browser V6.3
USBToPCPopUp
VoiceRecorder
XDAShutdown
YouTube
Zip
And many more....
Guidelines for flashing
Although it does not require different flashing procedure but I thought its better to avoid any mishap
*flash it using RUU available for OPAL
* after flashing wait for few minutes & then proceed to Screen alignment, it will help to avoid lagging in screen cursor
*Set the time zone, tap on screen for completion
* then the phone would go for customization, please don't stop it by any means. It is not OEM customization, it install few registry settings setting provided by some great chefs at XDA
* let the customization complete, be patient it may take more than 6-7 minutes
*After the device restarts, again do a soft reset
* some users may encounter the problem of home settings not working after loading msgs & contacts...buts it tempoarary problem...soft reset your device it will work
Now ur phone is ready to use
Give your feedback
Links: http://www.4shared.com/file/WmQqnrtp/ruu_signed.html
please post some screenshots, did you include EzInput ?
xtitan said:
please post some screenshots, did you include EzInput ?
Click to expand...
Click to collapse
Screen shots not required as it a deflaut winmo 6.5 ROM, no extra themes
All original grphics available in winmo 6.5
Ezinput is included....
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
I will sure try it
jagan2 said:
Nice imblfmstr, congrats.
I can't try as you know my slow internet. But iam sure it will be nice. Btw my wm 6.5 version on the way.
Click to expand...
Click to collapse
Thanks Jagan
I will sure try ur ROM, My office internet is too good....fingers crossed
I hope the ROM will be up today, so that I can download it tomorrow
By the way can u sent me the list of ur EXT in text file, my manilla2d is not working just wanted to confirm what all packages are required additonal
I haven't cooked m2d yet when i cook i will send you the list, and yes some packages are essential to make m2d work.
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
xtitan said:
Please help, my Opal has ONBL 1.27.0000, SPL 1.26.cmon
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
Click to expand...
Click to collapse
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
imblfmstr said:
Sorry dear I think the data you have given is not correct
your SPL should be 2.00.cmon, Just check in the forum for hard SPL thread if you can upgrade to 2.00.cmon
By the way my device has ONBL 1.35.0000 and I have cooked this ROM with stock ROM from my phone...so might be compatibility issue because higher version on ONBL
Click to expand...
Click to collapse
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
jagan2 said:
imblfmstr while cooking you included, onbl too?
If yes remove it, problem would get solved i think. Btw just using indian stock rom drivers wont creat prob coz i have once tried to use spanish stock rom driver and it worked fine.
Click to expand...
Click to collapse
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
imblfmstr said:
I don't know how to remove ONBL....
If u can tell...I will recook
This ROM is working awesome on my phone....I am very happy with this
Its just like official Upgrade....no glitches...no errors...
absolutely fantastic...even I could not believe how I did this....
Click to expand...
Click to collapse
i think onbl 1.35 work fine with those who have stock onbl 1.27
myself use onbl 1.27 on my stock onbl 1.35.0000
when you flash rom with onbl 1.35 your onbl that is 1.27 will change to 1.35.0000
Bug...
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Tuxologue said:
I have the error "Your OS ROM isn't customized for your hardware", with SPL 2.00.cmon...
Click to expand...
Click to collapse
also happened to me
Its working fine with me
aidinvm_ultimate said:
also happened to me
Click to expand...
Click to collapse
I don't know why its happening with you guys.....
Mine is working absolutely fine & superb battery life...
will look into it...might the the ONBL problem as said by Jagan
@jagan...if u can pls suggest buddy...
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
jagan2 said:
@imblfmstr: Okay do one thing download this.
Then open your rom in that editor, then u delete everything except the os part thats it.
Click to expand...
Click to collapse
Thanks Jagan will try this...
ONBL 1.35
Can someone post onbl 1.35 for download?
Not working
imblfmstr said:
Thanks Jagan will try this...
Click to expand...
Click to collapse
Sorry Jagan....nothing is shown wen i open the ROM with this app
Great ROM
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
mail2eswar said:
Hi Tahir ( imblfmstr ),
This is really a very nice ROM. Initially it felt bit slow but after 3 to 4 Soft resets this problem was solved. Now the ROM is fast and battery life is very good.
Is it possible to cook a ROM like this for 6.5.3 (The one with Start Icon at the bottom). I feel 6.5.3 is more finger friently.
Thanks for the nice ROM. Waiting for your next 6.5.3 ROM .
Click to expand...
Click to collapse
Thanks buddy.....
It takes 3-4 soft reset to make it smooth because I have included 5 different sets of registry tweaks made by some great XDA developers....intially it takes time to make the changes...

HTC Elf Original Rom

Can anyone help me. I got an htc Elf not long ago and I've flashed it from wm6 to wm6.1 to wm6.5 and back to wm6.1 and now want it back to its original state. is there a rom outthere that's got the basic apps n stuff. can someone post a link n pics. I want a uk rom im on o2 let me know asap
There are many original roms, you'll find them reading the stickie from kokotas.
I looked at a very old post and found an original rom but not been able to download it. can u post a link to point me in right direction
Did you go to the first thread in this forum like i told you? There are the only links i know...
Origional ROM
Here it is http://www.4shared.com/file/7Vlr1WMm/HTC_Touch_WWE_ME_2204561B.htm
You can also download the original Elf ROM from HTC website http://www.htc.com/us/support/htc-touch-gsm/downloads/ by Entering your device Serial No. Which can be found in the battery housing
Hi
can we load our original rom (link given above by user) ?
as i think we cracked something to install custom rom
so will it be possible to load our OG rom without any problem ?
arkerio said:
Hi
can we load our original rom (link given above by user) ?
as i think we cracked something to install custom rom
so will it be possible to load our OG rom without any problem ?
Click to expand...
Click to collapse
Yes that's possible and you can Flash your device with original ROM If you have a custom ROM installed.
I did it several times, try it, there should be no issue.
it recently failed to Flash Origional ROM on my device but device still works and there is no issue with my current ROM.
I didn't got much time to figure it out though but i suspect its either because of HSPL 3.14 or connectivity issue with Synch on Windows 7, i will try to downgrade HSPL to 3.10 and try to Flash Origional ROM again.
Indeed it's Hspl that prevents overwriting spl from shipped roms (custom roms don't have spl). If you want to flash a shipped rom you need to remove Hspl and use Uspl.
tito12 said:
Indeed it's Hspl that prevents overwriting spl from shipped roms (custom roms don't have spl). If you want to flash a shipped rom you need to remove Hspl and use Uspl.
Click to expand...
Click to collapse
Thanks so much for info , i will try it out and use USPL

Categories

Resources