Help, my hermes won't lock my micro sd card. It just suddenly happens. The hermes still able to detect/read/write my card if I hold the card in the slot, if I didn't hold it the card will sprung out. How to fix this? (apart from glued the card or put a tape to hold the card in place)
Related
Hi guys, I just put in a 1GB Micro SD card and I am having problem getting the card out or ejecting the card. Anybody know how or what is the correct way to get it out. I try pushing the card down but it doesn't pop up.....please help thanks!!!
Just press it inwards, and will pop out itself
I had the same problem. I went back to the store and we tried to get out by pushing it, but i did not work. We manged to get it out by pulling it out, and then we inserted a dummy card. This made the eject mechanism function again, and when I inserted my card again it worked.
I had the same problem when I first put in my micro SD card. I had to pry it out with tweezers. Thanks to this thread, I got the idea that I could get the mechanism working. So, I worked the card in and out several times, pushing it all the way in with my nail and letting it snap back a bit (and prying it out again) until the mechanism became loose enough to work properly.
Hi all,
I just got recently a 2gb microSD from Sandisk and conected in my X01HT(HTC TyTN), it doesn´t reconize the card and the card get very, very hot
anyone could help me with that?
Thanks
Assuming there's nothing wrong with the card, you might have put the card in wrong, or the card might not be aligned properly when placed into the slot. Try these:
1) make sure the contacts side is facing up when you put in the card (slot facing you, pda screen facing up)
2) as you insert the card (slowly), try to align it more to the bottom left of the slot. If it's inserted correctly, you should feel some springing pushing the card out as you insert it.
3) If the card is inserted correctly, it should bounce back out if you push it in a little.
hopefully that helps, but if all else fails, take the card back to the store.
Does any body know how I can fix this problem, My SD Card would not eject from the UNI slot anymore. The only way I can get it out is to pinch and pull it out.
Hi. I broke one of the 2 "arms" that make contact when the card is pressed down so my wizard is not recognizing it.
Is there a way to fix this? when i press the card down, it stays there but the backlight doesnt turn on and the card is not recognized.
Thank you
Also, the broken arm is broken in half
Ok, i figured it out myself.. I wrapped the sd card with aluminum foil (leaving the reading area uncovered) and thats it. My wizard is reading the sd card again.
Hi all
I must be blind as I cannot find the SD slot on my xoom 3g.
The SIM card slot was easy but I can't spot the slot for the SD card...
The cover for the SD card is the same as the SIM card. It's a little metal cage close to the screen.
It's in the SIM Card slot, the top section (nearest the screen).
You pull out the sim card tray and it is in there.
Edit, its funny get the replies in two minutes.
ahhh that explains it cheers guys.